How To Use a Drywall Lift
Vložit
- čas přidán 24. 07. 2024
- If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
Shannon from www.house-improvements.com demonstrates how to use a typical drywall lift to help put drywall on your ceiling. Video © 2014 SKS Media.
Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada. - Jak na to + styl
Other than moving it around I worked with drywall one time and one time only. I was a teenager and some guy hired me to help with a job. I get there he has me shoulder pressing the drywall from a ladder and holding it in an isometric 3/4th locked out position causing the most unbelievable burning, pain and fatigue possible. Back cramps, you name it. This went on for maybe an hour. I physically couldn't hold the drywall up anymore so he told me to sweep the floor for my rest. After sweeping for a while he informed me that it was time to shoulder press more drywall. I promptly left and never talked to him again. Long story short the memory of this just now popped into my head over twenty years later! I look up how to install overhead drywall correctly and your video popped up first! It's great to see it done right haha!
My dad left me on a ladder holding a cieling piece up while he went to get screws or nails . After an hour i was way down slanted tired .ugh . He laughed
Very well explained. Concise, accurate, clean with valuable tips like have a relatively smooth flood, or when lowering watch that the drywall doesn't catch on anything.
Very much appreciate your videos Shannon. I stumbled across your channel some years back and they have been an invaluable help to me. Thanks so much!
Who would have thought I would ever need this DIY. A minute ago did not know such a tool existed. Need something like this to (drop) an elevator ceiling. Reverse. Great explanation and content.
Awesome job. You helped me with my porch last summer and now I'm finishing the basement and this will help me with that. muchas gracias senor!
Excellent, thorough explanation! Thank you so much, I'm no longer terrified of doing this drywall project!
Finishing my basement right now and have been on the fence about one of these for the ceiling. You made up my mind! Thanks
Just bought one. Your tutorial helped me tremendously. Thank you
Thank you for this video, Shannon. Very helpful video as I got this at a discount from HFreight...no instructions came with it. Assembled it and almost dropped a sheet on my face and on my puppy. He was so scared the rest of the day and not confident of my drywall handling skills. He stayed by the corner near the first aid kit and cell phone the rest of the day like he's capable of helping. Thanks again, your videos are very helpful.
You make some great videos. They are made for guys like me who like to diy but don't have a lot of expertise.
I watch all you vids. Thanks for taking the time to help out the regular guy.
Good video so thanks. I’m looking to purchase one and now I see how to use it. I need more research on brands and where I might find a good deal. They range from $39.00 - $399.00 and basically look identical. The research continues. Thanks for taking the time to show us how it works. :) A+++
what not to like about this video . thanks again for taking the time to make this video . please keep them coming: )
thanks for the nice and clear explanation. I'm about to do some renovation on my home and I just bought a unit. By looking at this video a now know what I'm up against.
Thanks for this great video. Mine comes on Thursday and this helped me in preparation.
Thanks for the demonstration
Thanks Shannon! I've been wondering how to install the drywall on the ceiling in my basement. No way me and my wife could do it. I might surprise her, and do it without her knowing. Thanks again!
Did she like the surprise?
already did ceiling i nailed wooden block near where panel will go and twist blocks to hold it up.
We used mine to lift and hold in place a big store sign outside .
We put a plywoodboard on the rack on top to act as a platform for the sign and blocks underneath the sign . The lift under the edge of the overhang raised up and tight solid . The blocksheld the sign up and against the roof 3 foot tall surround wall . About 11 feet up .
Great job! Excellent video production and vocals. My friend loaned me this exact lift and it will be me against the basement.
FASCINATING!!! I love tools and fixing on stuff. Didn't even know something like this existed until last week LOL
Thanks that was a very informative demo.
Excellent video !
Thank you for your experience and showing me how to use my new machine.
Mike
Good, informative video. Thanks for posting it.
Thank you for this great video!!! Very helpful and informative 😃.
I always like your videos. Good job Shannon
Thanks great video ! I’m hanging a sloped ceiling vertical and assume it tilts from end to end ?
Extremely helpful for this newbie! Thanks!
So glad!
Very good video short and precise Thank you
Great step by step video Once again
Great resource, thank you!
Thank you so much
Thank you for posting this! I have to do a brand new 10 x 20 shed and I envisioned all sorts of schemes and contortions to hang the drywall, all of them looking exhausting and slightly dangerous.
Thanks Shannon, big help... Thumbs up...
Thanks man. Very helpful
thank you for the information. good form.
Thanks getting ready to do 1st ever drywall and it's a ceiling
Thank you sir.
One of those things where the measurements need to be exactly right the first time. . up - down.. trim it,up - down.. trim it,up - down trim it.. surface getting marred..lol. Mandatory for someone who's shoulders are gone & hands numb seconds over head.
Nice video...getting this tool.
Thanks Shannon. I have learned so much from watching your videos. I really appreciate you taking the time to share your knowledge with the rest of us.
thanks for watching
Thank-you!
thank u for info
Awesome video
Thank you
Awesome. Thanks a ton.
I have a piece of drywall that is about to fall in my garage. I thought I would be able to press it up by hand, but it has warped a bit and I can't hold it and screw it at the same time. If I get a lift like this, can I use it to apply tension to the existing drywall?
How to you disassemble the wheel lifter if it gets stuck
Good job on this video
Thanks mario!
Subscribed. Such a great video. Thank you.
Thank you for subscribing
Thanks.
Do those wheel need to be so wide apart? I have to move it from room to room. If yes is there a lift just to 9 feet high? that's all I need, thanks
GREAT VIDEO
I was raised building houses. I'm probably shorter than I should be from all the panels I've held with my head. We never had a lift. Kitchen sponge in your hat made the days better. No battery drills, had to drag cords. No roto zips, just keyhole saws. But, I'd like to have a panel lift. Glad you showed how it works. Young help can't work the hard way. So, I better get a lift. Thanks.
Ahh the good old days! LOL get a lift you will be glad you did .
@@HouseImprovements My dads retired, another guy is too, but the three of us just built my brother a house out of ICF, foam blocks pumped with concrete. We used to build those a lot. The other guy had a lift. But they found another guy that would hang it. He brought an old lift. I thought, man, that's nice. I know he's had it 20 years. He was our painter when we used to build. He used to spray trim and all with it hung. Come to work at 2am, work till 2pm, be gone in a week, all doors, trim, walls, cabinets, and all. Usually worked alone. I seen 3000 sq ft house hung in half a day by five sure nuff hangers. But, we a dying breed.
Thankyou Good Sir
bir günde kaç metre kare iş yapıyorsun acaba ?
Thanks Shannon. Long time to find this video but it was excellent and a few markers I did not consider - Got a 3-width garage here in the UK and now my worries are over. All I have to do is remove the two classic cars with dead batteries then I can start! Do you ever mark the joists on the wall before offering up the board and do a chalk-line?
You absolutely could.
Borrowed my friend lift rachet a piece of 3/4 plywood to lift then used it to replace ac unit on my camper roof a lot safer and easier than trying to carry it up a ladder plus roof is rubber membrane if you drop it on roof you have a another project can be used for more than drywall just think about weight center of gravity
Thanks for posting this, Shannon - how long ago THAT was!
The release date of videos is printed beside the video information. I think that one was about 2016
U make a lot of good helpful viifeos Shannon
Very good vídeo
Nice video. I'm getting ready to hang some rock and this tool is a must-have because I'm working alone. Looks like it will work just fine. Thanks for posting.
Najja Foluke I
Thi thank you I thought the lift came down to the ground and one person could side the sheet onto the lift grrrrrrrrrr I don’t have a extra person that’s why I want the lift but good video man any tips to cut sheets mud tape am a newbie will take any advice thanks merry cmas
I have an entire playlist of drywall related videos.www.youtube.com/@HouseImprovements/playlists
Just bought bone, thank you for sharing
Good sir
after loading the drywall, can you leave the lift bed somewhat tilted? Just wondering because I have a vaulted ceiling.
I did. I'm pretty sure you can do walls too. If you look at it the wheels open up pretty far so the thing can go up to the wall.
You're awesome Shannon. Really enjoy your videos.
Hi. Why do you have plastics under the beams? Never seen that before. Is that to cancel out the sound?
Yo Kells it's blown insulation the plastic keeps it from coming down
hmm , how high would that tool go up, i have 9ft doors on garage think i have 11 or 12 ft ceiling im want to tin it, that would work perfect
They vary, I think mine is 11'
Thanks guy,
I’ve got to buy one of these tomorrow morning and your video will be needed for sure.
Thanks again
Alternatively either, 2 people hold it up to the ceiling, then one holds the board in the middle with 2 hands and one screws up the board to the point where it holds it own weight. Secondly buy some drywall props, quite cheap and not a big footprint, easy to use on uneven flooring and so much quicker to set up. Takes 2 people to place the board onto this machine so I can’t see why doing it this way would not only save on time but cost of rental as you could carry the props in a small form factor. Great video on a other hand however I believe abit more labour won’t harm.
Try both ways and you will see the benefit. One drywall job the way you are talking could ruin your shoulders forever, but I have seen very big guys make to 35 or 40 doing it your way.
I love this mans enthusiasm.
Anyone know how to fold this thing back up?!!
I been using one all day first time didn't k ow about that latch
One question Shannon, do you put the drywall screws in the same pattern in the ceiling as you would when hanging drywall on a wall? Excellent video my friend.
On the walls you want at least 4 screws across the sheet on each stud and on the ceiling you want 5. Good question
HouseImprovements Great to know that' thanks for the reply Shannon.
Can't you use it for walls also??
I have been watching your videos and thank you for the great info you give. I have seen few other videos where they use a glue on the studs before screwing the drywall sheet on. I do see you have some plastic sheet covering the ceiling - what is it? Is that the reason you do not use glue on the studs? Any tips on how to use the lift when using glue on the studs?
The plastic is a vapour barrier required in most places on exterior walls and ceilings. If you do not require a vapour barrier in your case then apply the glue on the ceiling joists that you will be covering with the sheet. Lift the sheet in place and screw to the ceiling. I personally would not worry about using glue
HouseImprovements exterior walls should have insulation and vapor barrier. good to know. thanks.
what if i need a tool to hold the drywall for the highest drywall on the wall of a 10 foot tall room?? is there something available for that
These will actually do that also but it is easier if you have two extra guys instead.
Is it better to sheet the ceiling or walls first? Any advantages of doing one before the other? I’ve seen varying opinions or reasons
general rule of thumb is ceiling first. We can discuss the pros and cons in the forum if you come ask that question there.www.house-improvements.com/forums/
Nice!
Does the top tilt in both directions? I am hoping to hang drywall vertically on my vaulted ceiling since the vertical seams will be covered and having no horizontal seams to tape and mud would be a win. The peak of the vault is 12'4" Do you think this type of lift will work? Thanks
Yup this should work. They say you can use them to mount drywall on the wall but I have never tried that.
@@HouseImprovements thank you for the quick reply!
Nice competent drywall installer...I bet when he's done, the job is nice and clean...Everybody is in a hurry, that's what I like about remodeling; you can take a bit more time...New home building is brutal... When you charge a hunny a sheet; it's nice to have the luxury of time...Charge more; make more...
Thanks for sharing man!
Advice wanted! I'm currently using this hoist, but the manual brake keeps slipping on me. It's very difficult to get the sheet right up against my ceiling because the brake slips and the sheet lowers a couple of inches. I'm not sure what the problem is exactly, but I'm imagining that the brake surface is too smooth in some spots. Or maybe I just don't know how to use the machine. I'm going to have to rig something if I can't figure it out.
What if you pull down on the break to force it tighter?
@@HouseImprovements Brake simply won't hold where I want it to. I've managed to jury-rig the wheel pretty effectively now, but it's not great for making adjustments.
Appreciate your response tho!
4:50 - Good video but I have OCD, therefore cannot sleep at night without seeing this panel getting screwed/secured into place.
You didn't mention that you also use it to hang on walls! That makes it very easy!
do you usually drywall the walls first, then the ceiling? I usually do it the other way around...
Ceilings first. This was a reno,walls were existing
Renovating a dining room with a soffit in the kitchen. Luckily the soffit accommodates 3” deep grove and only 1/2”
on opposite dining room wall and using this drywall lift makes life so much easier to lock in the drywall on the 1/2” side.
Good job Shannon.
Pneumatic casters make them a lot easier to use
Me and my dad just each hold an end of the sheet while he screws until I get my screw gun working. I’ve never heard of using 3-4 people but whatever works, works.
With experiance that is fine. Whatever works
@Houseimprovements Great video. What is the reason for the plastic on the ceiling? I thought that is only used for outside walls as a vapour barrier.
This homes original vapour barrier was in bad shape. We actually removed what we could from up top and then installed this one.
What does this house look like, style, and floor plan? Could you send me a picture.
How did you lift the whole sheet from one side?
+themanginaman Magic super powers!
hoase!! improvement :)
Shannon,good demo.Question. What is the length of the sheet you lifted in your demo?
Almost 12'
HouseImprovements Thanks for responding to my question. This is the first time I have viewed someone using one of these. Looks to be a one man job machine if one takes it slow and easy and not rushed to do the job. You have convinced me to buy one. Thanks.
Robert Mckinnon I sheeted my garage with 7/16" OSB. I bought one of these and lifted all the sheets up for installation. It worked perfectly. I was working with standard 4' x 8' sheets. The ceiling is just over 10' up. I believe my unit can go even taller with an optional extension kit. Just be careful of that brake. I see these things in the store, cranked up high. I tell them to lower them down. If an unsuspecting customer were to touch that brake while the lift is up, the thing would come crashing down on their head.
Thanks for responding to my question.
Hi I have one from King Canada that looks exactly the same
, can I use this tool for putting sheet on Wall too?
+labidus74
You should, looks a little tricky though. I'm about to do that during the next week or two. Check CZcams, there is a video showing wall installation with this lift.
+Frank W yes I figured out thanks anyway this tool is really a nice to have
Whats the size or thickness for the wall that's on the side of the house and the rest and ceiling? TY
+thetruth
Usually 1/2" walls, 5/8" ceiling.
+Frank W thanks but i already pit 1/2 ceiling and thecsame for walls
Don't worry about it, the thicker sheets hide the ceiling from sagging a little better. Don't think most people notice it when its textured.
That looks great, might be better than sliced bread. HA!HA! I wish it could teach me how to work with sheetrock
There isnt in indonesia this tools
Why are plastic on the ceiling joists
Vapor barrier, must be an outside wall.
Can’t find a way to unlock it and this didn’t help me.