Hello, my friends! I'm going to say hello to Arleigh Burke class this time, and I'm going to make a video of this in 3 parts, so look forward to it. Thank you!
Great work so far. I have been able to do several Arleigh Burkes but have never felt comfortable/ experienced enough to go all out with the detail-up kits. I will be following this series with special interest!
Its about time someone built a arleigh burke class destroyer awesome work i am currently building one myself i look forward to the next video with great interest 😀
This is exceptional, I plan to build Bainbridge in this scale, the ship that had helped rescue Captain Richard Phillips from the Somali pirates, back in 2009, and have a few good references in preparation for building my version. Take care, and all the best.
Wonderful to see you at work, and I was thinking of adding this kit to my collection to build in the future, however watching you build it, I really don't know if I have the ability to make it anywhere as near as good as this.
Super Start!!! I was assigned to FFG's when I was in the USN..... so I have some 'OLD' FFG kits and planning on using the 'Pontos' PE on those kits. Although my FFG's are Not the 'Academy' kit, I'll try to do my best in manipulating the 'Pontos' PE onto that resin kit!! Wish me luck on that.....by the way.......... The "oil-can" method of metal skin on funnels looked Quite Interesting!!!! I must look at that part again on your video!!! ( but if you noticed there is much of that on the Rest of the skin of the ship!! [how would you do THAT part is a mystery!!!])
Hey there! Love your videos ! Can you please tell me what glue you use for the photo etch? Also I noticed you made moulding lines on the funnels.. did you do it by bending them? Im kinda new in the hobby
왜 그런건지 모르겠는데,유난히 현대 군함들이 단차가 잘 보이네요. 대전기 전함들이나 구축함들은 단차가 있어도 티가 잘 안나는데 이지스함들은 단차가 조금만 있어도 바로 티가 나서 조립하기 은근 까다로운 것 같네요. 예전에 1/350으로 타이콘데로가급 이지스 순양함을 조립한 적이 있는데 단차가 장난 아니였던지라, 그 이후론 대전기 군함들만 사게되네요ㅋㅋㅋ
How do you apply the large flat photoetch? Spot glue or coat whole surface? If coating whole surface how do you keep glue from drying on surface before applying?
@@tyvernoverlord5363 it's like buying a brand new (expensive ) car and covering it in tinfoil , I bet the brass costs almost as much as the ship-perhaps more .
@@fredtedstedmanPE parts are ~$30, kit is around $50, I think the car comparison makes no sense in this context. To create a museum quality kit you need PE parts. This is beautiful work of art
Just WOW ! Absolutely brilliant build...true craftsmanship. Thank you for making this available.
Oil-canning technique with photo etch is new to me. It looks perfect, so I'll try it out.
Great work so far. I have been able to do several Arleigh Burkes but have never felt comfortable/ experienced enough to go all out with the detail-up kits. I will be following this series with special interest!
Beautiful build, with exquisite attention to detail... Nice!👍✌️
OUTSTANDING I'll be following this one with serious interest as this one is on my too do list.
Beautiful build, the Pontos kit is awesome
Awesome video and brilliant workmanship
Its about time someone built a arleigh burke class destroyer awesome work i am currently building one myself i look forward to the next video with great interest 😀
Very nice work, Looking forward to Part 2 ⚓👍
Es hermoso el Arleigh. ¡Buen trabajo! 👏
WOW! Excellent work on the PE parts. Looks so much better with the Pontos set.
Ha, i really hoped for an Arleigh Burke Class as the next model. Great choice.
Not even finished and she's Beautiful!
Insane, I have a new name for this builder, " Master Steady Hands " Just Awesome.
This is exceptional, I plan to build Bainbridge in this scale, the ship that had helped rescue Captain Richard Phillips from the Somali pirates, back in 2009, and have a few good references in preparation for building my version.
Take care, and all the best.
I also watched the movie impressively. support your work.
Super, beau travaille. 😃👍
what a nice job ! well done mate !
Wonderful to see you at work, and I was thinking of adding this kit to my collection to build in the future, however watching you build it, I really don't know if I have the ability to make it anywhere as near as good as this.
In fact, it is difficult to make. It will be enough to make the kit well.
Super Start!!! I was assigned to FFG's when I was in the USN..... so I have some 'OLD' FFG kits and planning on using the 'Pontos' PE on those kits. Although my FFG's are Not the 'Academy' kit, I'll try to do my best in manipulating the 'Pontos' PE onto that resin kit!!
Wish me luck on that.....by the way.......... The "oil-can" method of metal skin on funnels looked Quite Interesting!!!! I must look at that part again on your video!!! ( but if you noticed there is much of that on the Rest of the skin of the ship!! [how would you do THAT part is a mystery!!!])
I'm worried, too. no choice but to cover that part with painting skills.
Superbe travail.
So great done! All the best for You! ;)
I just finished building an Arleigh Burke 1/350 scale. Now I need to find the time to edit and post my build on CZcams.
Fantastic work! also love that you use WoWS music : D
do you know the song
Scale modeling is fun | 'u' |
알레이버크는 사랑입니다.
Hey there! Love your videos ! Can you please tell me what glue you use for the photo etch? Also I noticed you made moulding lines on the funnels.. did you do it by bending them? Im kinda new in the hobby
I use locktite 401. Just scratching with a knife.
왜 그런건지 모르겠는데,유난히 현대 군함들이 단차가 잘 보이네요.
대전기 전함들이나 구축함들은 단차가 있어도 티가 잘 안나는데 이지스함들은 단차가 조금만 있어도 바로 티가 나서 조립하기 은근 까다로운 것 같네요.
예전에 1/350으로 타이콘데로가급 이지스 순양함을 조립한 적이 있는데 단차가 장난 아니였던지라, 그 이후론 대전기 군함들만 사게되네요ㅋㅋㅋ
Thanks so much to do this model☺️☺️☺️
It would have been nice to have the corrected bow included with the 1/2-0 Bismarck kit from Pontos,correcting it was a bear.
How do you apply the large flat photoetch? Spot glue or coat whole surface? If coating whole surface how do you keep glue from drying on surface before applying?
with so many brass extras, it would be better for the manufacturer to make the entire model out of brass in the first place..
16:33 조립을 잘못한게 아니고 다 저런듯. 저기 에칭이 빠진거 같기도하고.. 여튼 넘 멋지게 만들고 있네요. ^^ 다음 영상도 기다리고 있습니다.
조립하면서 생긴 조그마한 단차들이 모여서 저래 된것같기도 하고요..ㅜㅜ
Huuufff y solo es el primer video 👍🇲🇽
I can barley but some seat belts on a 1:48 aircraft. How you do that; I’m amazed
Hmm interesting uss wayne e meyers will be perfect for us destroyers top unit in my toy collection
But i am waitimg the big 1 of it
Question?! What kind of glue for metal on plastic? Please name of the glue, and Response ASAP. Thanks!!
WOW
Question sir what types of grey did you use for flight decks?
상가대 너트는 따로 사신건가요? HS 모델 상가대는 기본적으로 너트가 작은거 같아서요
Nice work! Crazy amount of detail. What are you using to prime the PE?
i use car paint primer.
@@studioblueocean4590 Acid etch?
With those fingers you should have been a surgeon the way you handle PE I cannot do it .
Again an epic video built is coming...
What paint coatings are you using?
Metal earth destroyer
킷은 안비싼데 디테일업 애칭이 겁나 비싼 특이한 케이스.
Wow
where are you from
오토모댈 에칭작업은 함선에 비하면 어무것도 아니네요. ㅎㅎ; 어제 영상 문제때문에 오션님 리플 달린글 눈물을 머금고 제업했습니다. ㅜㅜ
영상이 바로 사라져서 문제가 있나 했는데 그런 일이 ㅜㅜ
선댓글
후감상
여어 개근상 줘야겠는걸?
테이프 성애자는 내가 생각했던것 보다 훨씬 더 변태였다..
안녕하세요
...
World of warship song 😃🤩😍😊
I can't see the point in buying a plastic kit -and then putting this much photo etch on it .
detail that the plastic can’t give you
@@tyvernoverlord5363 it's like buying a brand new (expensive ) car and covering it in tinfoil , I bet the brass costs almost as much as the ship-perhaps more .
@@fredtedstedmanPE parts are ~$30, kit is around $50, I think the car comparison makes no sense in this context. To create a museum quality kit you need PE parts. This is beautiful work of art