This looks absolutely fantastic. I always thought about getting a 1/350 AB, but after seeing this I just feel like I'd be disappointed with my end result :D
At the time USS Wayne E. Meyer DDG-108 was commissioned, the Food Network series Dinner Impossible, hosted by chef Robert Irvine, prepared the meals for it's commissioning. I taped that episode for reference whenever I do start building my USS Bainbridge. I had also taped the Discovery series, Mighty Ships episode, that had USS Gravely DDG-107, as well for reference. I also own the complete series of The Last Ship, with the fictional USS Nathan James DDG-151, which is very useful for reference in building a scale model. I even own that 2011 film Battleship, that has USS John Paul Jones DDG-53, though they portrayed it as both a Flight-I, and Flight-IIA, I didn't mind, since I will be building USS Bainbridge as the Flight-IIA. Two great books that will help me prepare in building my Burke, are from Squadron/Signal's book on the Burks, and Warship Pictorial series of that class of destroyer. For my Bainbridge, I will attempt to build the interior of the bridge, and that passage way with the double hatch. Great mastery of this build, take care, and all the best.
Outstanding to watch you spend 6 hours masking the model, but also good to see that even modellers like yourself make mistakes with the paint drying times, it makes me feel better knowing we all make such mistakes sometimes.
I could have used your techniques as reference on my DDG Flight I when I started building it 2 years ago. Too bad Pontos didn't have PE kit for the earlier Burke. It looked more detailed. I had to use Lion Roar. I was intimidated when I built the mast, due to its delicacy... but it was the most challenging and most fun part of the build. I was hoping to see you add rigging to the mast. Outstanding work overall. As they say in the Navy, "Bravo Zulu!" (BZ!)
I went onboard this Same ship F.O.A. = "Father of Aegis" who Wayne E. Meyer is......... he is the founding Project Manager for the Aegis Shipbuilding Project Office! Cool to get a destroyer named after what you have done!!!!
I'm only halfway through this video. I would like to say to seal your paintwork before you mask it off. I think you'll have less trouble with paint pealing that way. I'd even say shoot a layer or two of hairspray if nothing else. That's a lot of damage for all your incredibly hard work there my friend.
![PART 3 - Making 1/350 Arleigh Burke class [FINISH]](http://i.ytimg.com/vi/iKd0GpbWj8g/mqdefault.jpg)
![PART 3 - Making 1/350 Arleigh Burke class [FINISH]](/img/tr.png)
![[FULL BUILD] 1/350 Making Arleigh Burke class](http://i.ytimg.com/vi/X42ppkguy0M/mqdefault.jpg)
The amount of masking is insane! You are a credit to the hobby, Sir. Excellent job 👍
Magnificent work on the oil canning and blending it in - learned a lot from this video, thank you so much
Love the Arleigh Burke class in general and your work is outstanding.
This looks absolutely fantastic. I always thought about getting a 1/350 AB, but after seeing this I just feel like I'd be disappointed with my end result :D
At the time USS Wayne E. Meyer DDG-108 was commissioned, the Food Network series Dinner Impossible, hosted by chef Robert Irvine, prepared the meals for it's commissioning. I taped that episode for reference whenever I do start building my USS Bainbridge.
I had also taped the Discovery series, Mighty Ships episode, that had USS Gravely DDG-107, as well for reference.
I also own the complete series of The Last Ship, with the fictional USS Nathan James DDG-151, which is very useful for reference in building a scale model.
I even own that 2011 film Battleship, that has USS John Paul Jones DDG-53, though they portrayed it as both a Flight-I, and Flight-IIA, I didn't mind, since I will be building USS Bainbridge as the Flight-IIA.
Two great books that will help me prepare in building my Burke, are from Squadron/Signal's book on the Burks, and Warship Pictorial series of that class of destroyer.
For my Bainbridge, I will attempt to build the interior of the bridge, and that passage way with the double hatch.
Great mastery of this build, take care, and all the best.
Superbe réalisation.
Outstanding to watch you spend 6 hours masking the model, but also good to see that even modellers like yourself make mistakes with the paint drying times, it makes me feel better knowing we all make such mistakes sometimes.
Oh, yes..... we make mistakes also!! But important to Practice and Patience!!!
you are the master. great work
Excellent work! A pity the paint peeled off withe the masking tape, but you fixed it very well. The PE mast looks stunning, well done.
Superb workmanship as usual, well done.
Thank you for posting.
Maestro!!! 👏👏👏👏
Beautiful work!
Beautiful work! The amount of details is insane! 👍👍👍 BTW, I don't seem to see the propeller blades.
I could have used your techniques as reference on my DDG Flight I when I started building it 2 years ago. Too bad Pontos didn't have PE kit for the earlier Burke. It looked more detailed. I had to use Lion Roar. I was intimidated when I built the mast, due to its delicacy... but it was the most challenging and most fun part of the build. I was hoping to see you add rigging to the mast. Outstanding work overall. As they say in the Navy, "Bravo Zulu!" (BZ!)
I went onboard this Same ship F.O.A. = "Father of Aegis" who Wayne E. Meyer is......... he is the founding Project Manager for the Aegis Shipbuilding Project Office! Cool to get a destroyer named after what you have done!!!!
Very good video!
from 🇰🇷
Very professional!
Beautiful ship and excellent job, i love it ❤️
I'm only halfway through this video. I would like to say to seal your paintwork before you mask it off. I think you'll have less trouble with paint pealing that way. I'd even say shoot a layer or two of hairspray if nothing else. That's a lot of damage for all your incredibly hard work there my friend.
Sugoi that some workmanship right there
선배님 저 6월말에 전역전 휴가나온 663기입니다...ㅋㅋ
진짜 존경스럽습니다...
Super work! Congrats! May I ask to you what color did you use for the main deck?
Beautiful
I wish there was a well stocked hobby shop where i live
딱 제생일에 올려주셨네요 잘보겠습니다
Okay, watching the video again, im sorry. I see what you said about the window, but what type of clear coat did you use?
Wow just wow
역시 에칭위에 도색인지라 까지는건 어쩔수없군요ㅠ
This guy is good. No doubt.
But, Ebroin is another level.
간곡히부탁드립니다. 선배님
와스프급 강습상륙함.한번 안되십니까?
제 최애.군함임다
전 이런 짓(?) 못합니다..ㅜㅜ
짱이세요.
영광입니다. 다르지만서도 같은(?) 함선프라모델러 두분을 뵙게되다니 두분만의 매력포인트가 있는 듯 합니다. 진짜 존경합니다.
추천을 안누를수가 없네요.
MEGA GOOD
nanggala 402 RIP indonesia 🇮🇩🙏🙏🙏🥀🥀
what kind of color did you use?
世宗 李祹に似てますね
모형시작한지 2년이 넘었는데 이걸 왜 지금봤을까요..
6:30〜
you need metal primer for PE parts
He did in Part 1.
@@elation8101 so he need a GOOD metal primer))
와 실제 함선이랑 구분이 안돼요
언제 올라오나 했는데 드디어 올라오는군요 ㅎㅎ
Hi☺☺
1