Traxxas Slash - Spec Racer setup tips
Vložit
- čas přidán 30. 07. 2017
- Affiliate links:
Traxxas Slash: bit.ly/36sSwNN
Gens Ace Lipo batteries: bit.ly/3c4z3qV
I've been racing my Spec Slash and have some setup tips to get the most out of your stock Slash 2WD.
GREAT JOB MAN!!!!! I’ve been looking for something like this for a long time so keep up the great work... THANKS!!!!!!
Great video man thanks! My slash is half stick half rpm parts as well as upgraded to brushless. My local track does not do races anymore but I still enjoy going and practicing.
Hey man, I like your videos very educational and to the point!!
thanks, much appreciated!
Good stuff. Just started racing. Spec slash is very popular here. The club maintained track is right next to the hobby shop. Buy the truck there race for free etc.
We run everything from 2wd 1:10 buggy to 1:8 etruggy as well as nitro etc. Hard pack dirt track that gets “dusty” and isn’t super smooth.
So I’ll give this a go!
Thanks razor! Nice video! It's me from the TRX forum.
Great quality video, just subed
Have you added weight to the front or rear of your truck, I add some to the front of mine to make it more aggressive, but I run on lose topsoil, I run 35 in the back and 25 in front with 3 hole pistons, i use pb blaster on my tires and bag them there super soft and lowered it a few millimeters with fuel tube
hey there i have a quick question i was hoping you can help me figure out?! I installed the hotracing locker for the rear differential and i ran it once still with the stock brushed motor and esc setup, gearing, with a 2s lipo and the motor is overheating along with the speed controller, hotter than I ever have been able to get it.
could you please help me diagnose why my 2wd slash is now overheating? i was driving it normal not beating or bashing just testing it out, had to cut it short because it was getting soo hot.
someone said it could be the gearing mesh, but how can i avoid this overheating issue? maybe regearing what would you recommend for gearing, and also if u could let me know any other possible fixes or changes I can make to the slash to cool down that engine and especially the ESC,,, even on my xmaxx bashing it and wheeling up and down the street has never gotten the esc or motor or electronics as hot as the 2wd slash w locked rear got just driving it slow for maybe 5 minutes if that.
thanks in advance, i cant wait to hear what you recommend!! Im at your mercy please help me out... thanks
-p3t3r
I just sold a brushless rustler and a 4tec 2.0 to get into spec slash racing.
The connector you used for batter, did you make that or buy? I need one myself
you didnt say what kind of track you were running on, indoor outdoor carpet dirt ect?
What kind of radio receiver have you upgraded to?
Good info! =)
What type of battery do you have in there ?
what’s the perfect shock weight for an indoor/outdoor track that has tight turns
50 works well for me
Saludes como puedo encontrar llantas
Thank you now I can pull drifts to my grandsons ankle
What pinion did you use?
stock
*spring spacers NOT shock limiters,.... limiters prevent droop and spring spacers increase ride height.
Hey I'm New to this 2wd slash.. I have a question? Is there only 1 throttle? wide open always even if you touch the throttle? or is it just a bad setting on mine?
Yeah that's messed up you should be able to use any amount of throttle you want and control the speed.
No, as a owner you can go slow or fast. No 1 speed
No lcg chasse?
You can’t use lcg in the spec slash class
Slap a velenium system on that and you will be very satisfied!
Great vid/thanks
You need a lcg chassis
I don't think LCG chassis are allowed with spec class.
Also wash out that grease ..n replace it with drops of 3 in one oil. Cut yr inside bearing dust covers so no drag on bearing shaft n they come dry 3 in one oil drops and watch this thing fly.no drang on all 4 wheels n engine.coust forever...
Tip drill hole top n bottom gear hosing n flush out to clean n air add new drops..👍🤑
Dont cut the clutch outside bearing..
make your steering equal...*see his is off big time*
You can get these on ebay new for $180-$200 without the awful audio.
Uhh and umms. Can't stand it.