Installing Pegas Scroll Saw Blade Chucks
Vložit
- čas přidán 24. 08. 2024
- Hey everyone! In this project video I upgrade my Delta 20in Scroll Saw by adding Pegas Blade Chucks from Klingspor Woodworking Shop ! Klingspor wanted to help me and sent me The chucks and Pegas Blades ! Thanks Klingspor ! Hope you all like the video !
Remember, If I Can Make It Or Do It So Can You !
Please continue to Like, Share, and Subscribe to my Channel to see all future uploads !
God Bless !
Music in this project video is from the CZcams Audio Library.
Klingspor Woodworking Shop Links;
- www.woodworkin...
- / klingsporswoodworkingshop
- / klingsporusa
Contact Me At These Links;
Mailing Address;
Artisan Pirate
1015 Dixie Street
Burlington, NC 27217
- E-Mail; artisanpirate@gmail.com
- Instagram; / artisanpirate
- Twitter; / artisan_pirate
- Also, contact me through Social Media if you would like to Sticker Swap !
#ArtisanPirate
Really nice to see a professional company like Klingspor support makers like you. All the more reason why I seek their business 1st. Happy for you because you help support this community in a tremendous way. Way to go Pirate - way to go Klingspor.
Thanks Skiggly ! I love Klingspor!
Thanks Mr. Pirate! I installed a Pegas blade clamp on Delta by following your instructions! It cuts so much better now. Thanks again!
Glad I could help! I hope you get get alot of great results using the Pegas Chucks!
Am glad you approved them. Just installed these on my Dewalt 788 . With shipping,, $96,, but worthy of the upgrade for the DeWalt i guess
Glad you like them! Once I installed them on my Delta, I never removed them
Im still trying to put my blade in the bottom pegas without looking at it good piece of kit ill get the hang of it one day
Yea. Took me awhile to get the hang of it myself
👍👍👍👍
Thank you for sharing the Pegas Clamp installation video. I've ordered the Pegas clamps...
Awesome! I'm sure you will love them!
great video thanks for showing us I will also be watching for information on your alignment tool
Your Welcome !
Great video! Seriously considering the upgrade. I too would be interested in the 3D printed scroll saw alignment tool. Looking forward to your next project. :)
Thank You!
I will look forward to your review in a couple of months. I use mostly #3 Modified Geometry Pegas blades and have been very happy although there was a period of time when they were backordered.
Thanks Pat ! so good so far with the new clamps, and I have never used the modified geometry blades
The early Pegas clamp for the DeWalt type saws came with a tension lever. This meant two tension levers to adjust. It appears that the tension lever on the new clamps has been eliminated. Also give the Pegas Modified Geometry blades a try. They are sharp and cut straight.
Thanks, I was curious about the tension lever of the early pegas blade chucks
The ones with the tension lever are an upgraded type
Hi AP
Where do I get plans for 3d printer?
Thanks for the info, I'm eyeing the kit up for my new-to-me Dewalt. Question you ya. When I tighten the Dewalt chucks, the knob/studs seem to grab the blade and tweak it out of plumb unless I use my other hand to keep it straight until tight. Is this normal? Does the Pegas chuck fix this? Thanks for helping if you can.
Hey, usually it does take both hands to tighten the screw down on the blade
Where can the Scrollsaw alignment tool be purchased? If you made it yourself I would be interested in buying one from you. It looked like a very interesting tool.
Thanks, and I have a 3d printer and making them :)
@@ArtisanPirate I would like to purchase one from you
i also would like to purchase one of alignment tool
The file for the alignment tool is a free file on thingiverse
Would the "Pagas Blade Chucks" work for using a "jeweler's" metal cutting saw blade on a scroll saw?
Yes, if you have a scroll saw compatible with the blade chucks
@@ArtisanPirate: "Thank you"
hey tyler i know this is an older video but i just got mine in the mail. when adjusting the set screws are they supposed to align in the middle?
They are for dialing in the blade alignment and making sure your blade is perfectly square to the table. I had to keep tweaking mine and doing tests cuts until I was perfectly square
Great video. do you think the Pegas clamp set is worth the $80 price tag on a new saw (not actually needing new heads)? thanks and great job!
Hey! The Pegus Blade Chucks are outstanding quality and I'd recommend them to anyone wanting to upgrade their scroll saw
Ok. Thanks for the response. Appreciate your time. Larry in Mississippi
Where did you get the scroll alignment tool?
I 3D printed it, It's a FREE file on thingiverse.com
What did you use to get the cap nuts off??
I show how to install the chucks in the video
Thankyou very much for this video! I have the DW788 and I have wondered about the Pegas blade chucks. I was hoping the quality would be better being Swiss. I'm glad you showed the process in changing to them. Where did you get that blue blade square? I have never seen one like that. Thanks again! Take care!
Thank you! And they are quality at its finest ! And I 3d printed the blade tool
Mine says "Made in Taiwan"