Solo Stove Bonfire Fire Pit Surround Table Top unbox & assembly
Vložit
- čas přidán 15. 07. 2024
- thanks for watching my unboxing video
i hope you enjoy my new bonfire set up
below you will find the AMAZON links to make finding everything so much easier!
solostove.mention-me.com/m/ol...
BONFIRE LID
amzn.to/3PHgNH8
BONFIRE FIREPIT
amzn.to/48Cx2Of
FIRE PIT SURROUND
amzn.to/3tr1Tgr
ROASTING STICKS
amzn.to/3tjLrP8
here is the perfect caster that will thread into the legs for east movement
amzn.to/3Q6biD2
Thanks so much!
You're welcome!
Great video. The weed sticker told me this was the right place. 😂
Keys to success. Don't tighten down screws until everything is connected. Should be a little rattling. Once together, sit it upright on a flat surface and tighten down all screws a little at a time, in an even rotation, even crossing to the opposite side. I went 2x with the final as a snug tighten on each screw. This process will also help you seat the surround rings evenly and level at the seams.
Also...the brackets that hold the fabric should have the tabs facing up. You can check it both ways, but it seats cleaner with tabs up, as in the Solo assembly instruction book.
Thanks for the video. Your tutorial was invaluable and saved me loads of time.
I'm going to be putting this together on my own, so this was a PERFECT instructional vid for me! You even addressed the setting on the bottom frame for the model I got - the Ranger (vs your Bonfire), which I'm sure I'd have puzzled over, lol. Thank you!!
I ended up with several stripped screws. You are one lucky guy.
Silly question, what is the distance between the feet? I know the outside diameter is 42 inches but the feet look like they are maybe an inch or so? I’m trying to see if the feet will fit inside the lip of a rolling cart I have to move it around between locations
Im thinking of getting this over the Breeo because i have 3 kids and that surround table it a great idea to keep them safe & place drinks on it. Do you think it would look bad without the skirts? I know the skirts are part of keeping the safety idea but my kids aren't that young to not know better lol
i think the skirts make it look more finished
and once you get the surround they make a nice tabletop that is real useful
Hi, can i use the spreader and the spark arrester together?
Do you use the bonfire under the cantilever Umbrella?
no i never fire it with the umbrella open.
I’m assuming I don’t need the stand for this as the surround would serve as a stand. (Also it wouldn’t fit on the surround with stand, correct?)
correct and the only reading i got the surrounding is it will always be on the patio
its says on the last page of the assembly manual to 'never use surround with the stand'