How to make the Ultimate Worktable Clamps
Vložit
- čas přidán 3. 09. 2016
- These cam lever clamps are simple and quick to use and setup and also very easy and cheap to make.
Templates for hole spacing up to 78mm: 1drv.ms/b/s!AvnyWUOnZKMUogex8...
Templates for hole spacing up to 99mm: 1drv.ms/b/s!AvnyWUOnZKMUogjqY...
A kind viewer made DXF files and gave them to me to publish with you: 1drv.ms/u/s!AvnyWUOnZKMUogkgW...
Want to see more of me?
Follow me on Instagram: / marius.hornberger
Want to help out?: www.patreon.com/mariushornber...
or support me through my Amazon wishlist:www.amazon.de/gp/registry/wis...
Enjoy the video! - Jak na to + styl
I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great czcams.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.
Not only are you clever enough to design and make, you also film what you do, explain what you do in very good English, edit it all to make perfect sense. Well done very clever Marius.
Thanks, man!
Just finished a set of 4 clamps and stop blocks. These are amazing and will allow me to use them for carving and other woodwork. Thanks again for the precise presentation and templates.
it takes brilliance to come up with the most simple and effective solutions. Excellent!
Great idea! Watched this, printed the template and ran out to the shop to make them. They work great! Easy setup, hold very well, stay put and doesn't damage the work piece. Will use them on my glue up and sanding tables. Don't have a CNC yet but I will find plenty of options for this system like homemade bar clamps and perhaps picture frame adaptation. The best part is, they are made from scrap so I can make as many as I want without a trip to the hardware store.
I already have the holes, but i still need to build my bench around them.
I really like these dogholeclamps!!
lol
Pocket-holes ?
I just wanted to say how amazing these are and a really really BIG thank you for making this video! I'm new to CNC, having built one in my attic as a project. I was creating my spoilboard and was initially looking at threaded inserts in a matrix style to then screw clamps to. However, I found your vidoe and the plans for the clamps and gave it a go today. The results are amazing!! I'm soooo pleased. If you ever find yourself in Fife, Scotland then I owe you a couple of beers. Thanks again for your great videos. Really like your humour and your style. Cheers :-)
Awesome design. I built a pair of these out of a scrap of Luan plywood underlayment left over from a closet reno, and they were easy to build, and FREE! I finished them and tried them out tonight for the first time and they work great! Thanks for posting this design!
Thank you very much, you are a great engineer. I was initially interested in looking for a low profile clamp system for a wood carving table but see this will also work great on my larger work table. Very nice work.
Clever engineering and quite appreciated for those who aren't so inclined. Thanks! Keep it up.
Smart, smart, smart!! When I downloaded your drawing from your original "Cam Lever Clamp" video, I thought, WTF!! Very smart design which I will implement on my DIY CNC. Thanks.
Once again you give us a brilliant idea executed with the precision of an aged master craftsman. And thanks for showing the little mistakes along the way. It serves as a great reminder that even the best projects are built by humans. So we break an egg or two, omelets are delicious! Great work Sir, thank you for sharing.
Hello again, ECXELENT VID!!!
i completed my first set of cnc worktable clamps as per your template plans provided & it works great.
Next time i will use a better solid wood as the ply is prone to splitting at the laminate seams and high crush pressures.
Thanks again for sharing, explaining & demonstrating.
I have my holes in the table and the original clamps and so far, looking good. Now to tackle the square ones. Great job.
Clever clever, interesting to see the progression to these and how they surperseed your immediate prior designs. I think these deserve a patent.
Patent is too late now. Besides, cam-levers are widely known already. The idea is still awesome and deserves lots of credit!
-Now you can build your workbench without needing to install a vise; just drill dog-holes instead and use cam-levers - you can of course combine that with hold-fast and other clamping methods.
love the outtakes. Your videos are always a learning experience for me.
I've never seen anything better than this clamp. Thank you so much for sharing this incredible idea.
I like when a creation is the fruit of smartness and not the one on technology only. This one is great.
thank you so much dude, and the guy who made the dxf too, you saved me a whole bunch of time and woodpieces flying around by sharing this clamps
Ingenious! Thanks for sharing the idea. I'll have to adapt it to my specific table, but this solves a few of my clamping problems. Thanks! :)
Youll make a great engineer, Marius! Impressive development of this smart clamp
Awesome idea. I just commented on Izzy Swan's channel that as someone starting to fill out a shop clamps have been a big issue for me. They are so expensive so do what I can with the few I have. Making them is so much cheaper. Thanks!
Thank you Marius for sharing this! Just made my own set of these and works wonders, very nice!
Thanks for the free plans. His work is creative, well explained and well done. Congratulations.
You're a bloody genius, mate!! Love your work and ideas! New sub from New Zealand....
Thanks for the design and instruction. I built them and I am very happy using them. Thank you for making this edutaining video!
I made a set today. They work great - thanks for sharing this. I had to adjust the DXF to accomodate imperial (blech) pipe. I cut the whole set out of a piece of 24"x24" birch plywood, then used them for another project after the glue dried. Very cool stuff. Maybe half an hour of tweaking the CAD and getting the CAM set up, about 10 minutes to cut.
Hello, I need to change the file to accommodate 15mm pipe, do I just need to reduce the circle size where the pipes go, or scale down the whole design? Any help appreciated!
Nice work, Thanks for the out takes. After a frustrating day getting the CNC router working again and cutting into a screw with the router bit, I needed the laugh!
I love your videos Marius and I have to say this one always peaked my interest but did have cause to build any. I was trying to figure out the curve type you needed for the cam action and determined that it really needs to be an archimedes spiral - which is one whose distance from the center increases equally with each unit of degrees rotation. The common failing is that people believe a circle with an offset center is the secret and it isn't because that has an inconsistent clamping force depending where the binding point is.
Wie die anderen schon gesagt haben - Gut gemacht Junge!
Yep. Just made that circle mistake. Thats why I am here😂
Bravo Marius, aujourd'hui j'ai fabriqué à l'aide de t'es dessins ton système de clamp sur ma CNC.
Celà fonctionne à merveille. Maintenant je fais un montage dans quelque secondes, et c'est vraiment solide.
Encore bravo.
Envious of your abilities both mental to work through issues and mechanical / woodworking to get them to work.. Look forward to more of your inspiring videos..Thank you.
Thank you Marius. These solutions are brilliant and will help me loads. And thanks for the downloadable plans to help me make them. I will pay it forward since you have given the result of your work to me
Very nice, inexpensive to make clamps. And extra thumbs up for making the templates available to everyone that wants them.
yes they are real nice I made a few with some 12 mm pipe I had somewhere and it works like a charm the best for me so far
yes i agree, you are very smart. great job.This is the best clamping system
Great idea, and simple operation
Allows full access to the top surface
I’ve been contemplating a rebuild on my work bench and installing dog holes in it but didn’t want to make it as thick as you need for traditional hold downs but with your idea I can do it with just a sheet of 3/4” plywood and still have the holding power I want and need
That's just genius. I'm going to make a set. Thank you Marius!
These are brilliant! just got a table top and have been thinking about how to outfit it. This will work great.
Great video,I'm going to redo my whole waste board now.I love this clamping system.Thanks
Very nice 'upgrade' Marius!
I'll be setting aside some time in the shop tomorrow to make a set of these.
Real love this design. Going to make them tomorrow. Thanks for the plans. I enjoy watching all your video's.
Marius, very ingenious and applicable. Thank you for sharing!
This is brilliant for my home setup! Thanks a bunch :)
Ingenious in it's simplicity!
excellent videos. ...I learn a lot from your videos. I enjoy watching them. thanks for sharing your love for making things
Thanks for the video and the plans. Made the clamps today: works perfect :)
Nice, might have to use this system on the workbench I want to build. Thanks for sharing!
Well done. Great idea and design.
I'll hopefully be making this as soon as i get my DIY CNC up and running.
Marius you are the best. I am ingeneer from Russia. You are advantage so wonderful. Good luck.
Working on making these now, love the templates, they really helped!!
That's a clever work ! I'm really much impressed !
So simple and yet so effective, ingenious!
Thank you, Marius! Like always, the videos are plausible! Ich Danke Dir! :))
Very well thought out. Great build!
Absolutely brilliant! Bravo!
Good job! Very creative solution!
Thanks, these are absolutely ingenious!
clever solution! Bravo! i'm going to adopt these!
Love these! I will be building a set for myself. Thank you!
This is genius! Exactly what I need for my Paulk style workbench. Hope to bang these out tomorrow (in imperial, though).
Just found your channel yesterday by accident and I have to say I am very impressed with your ingenuity as well as your videos. I look forward to the svg files of this being uploaded. I loved the idea. Also is there a video on the construction of the bottom cone of your dust collection system. I watched the rest but did not see that one. Keep up the good work.
Play with some of the sides being cut at a overhang angle, that way you can bring in some downward pressure. Specific flute patterns cut and pull the piece up. Side pressure does present some opposition to an upward vector, but it drops off exponentially.The copper tube lugs should have some roughness to max friction in the dog hole.
How did I miss this.... You're a genius!
Good job Marius. Besides, I'm glad you've shared the plans. Regards!
Thanks so much for providing the templates for free. That's a great contribution to pottering mankind ;)
This is absolutely brilliant! Well done
Thanks you to France for your explanation.
Wonderful and great idea, thanks for the plans.
Schön das du im Moment mehr Zeit für deine Videos hast. Schaue die immer sehr gerne an :)
Ich denke ich werde mir auch solche Hebel für meine CNC anfertigen.
Cool system. Just finishing my big CNC router and I'm going to make bunch of these :)
Thanks!
Good evening Marius, yes ran clips, made of plywood 20 mm was very resistant, thanks friend for the tip!
Brilliant work, Marius!
Ingenious design Marius. Cheers, Jim
Marius these are a brilliant design!
you are a smart dude! engineering at its finest
U are my hero, thank You Marius.
Very clever - clever enough that this should really be a commercial product.
Marious,
Ingenious design.
Thanks!
Very nice Marius. These look handy.
Lovely simple design.
Excellent design! Thanks
This is a very good idea. Excellent!
dHi Marius. Inventables should talk to you about using these with their systems. Great idea.
These will work great with the Mathias-designed router pantograph I just made. Thanks!
This is so awesome!!!! I need this for my CNC.
Again, great engineering. Big fan!
Thank you Marcus. Very much a appreciated.
Genial einfach, einfach genial ! Unfassbar gut ! Ich habe Dein Video (leider) erst vor ein paar Tagen gefunden. Genau das. was ich schon lange gesucht habe. Heute habe ich mir die Teile nachgebaut und gleich ausprobiert. Besser geht´s nicht ! Danke dafür !
brilliant! i will build some of these right now!
Excelente, gracias por la enseñanza Marius
Well done!! Wie immer mit Marius! (y)
I'm sure he's come up with something even smarter since 2016, as he doesn't seem to stop finding ways to improve things, but this fits me perfect and exactly what I'll copy in the new workbench I'm making. (y)
Fantastic design. Nice.
thanks for your great ideas...i really like this
This is amazing! I'm looking for the best wasteboard setup for my CNC machine for weeks now and this one is easy to make, cheap and there is no need to buy dogpins, clamps or whatever. Thanks!!!
Maybe make the pipe a bit longer so it goes thru the whole clamp.
Nicely thought out.
These are great! I have a paulk total station built and this design should serve me well. Thanks for the video!,
That's clever and simple!
These are great! Thank you.
Thanks very much Man, I made this clamps.
Great idea. That's all I have to say. Thank you!