If the sleeve gets dirty does the cylinder not as well? I was told the inside of the cylinder is shiny bouncing the light rays back. Would I not have to clean the inner cylinder somehow?
I was told to replace at 2 years. I did not have an alarm going off but I replaced it at 2 years, which was last week. It continues to blow the 2 3amp fuses in the controller. I called the company and they said that replacing the bulb will probably stop the fuses blowing. It did not. Why is it still blowing fuses?
I have a question.can we use a high pressure switch to control on/off for uv light. I mean when you open faucet which belongs to ro system,the high pressure switch is turned on the uv light.so l think we can extend life span of uv lamp . What is your comment. Thanks.
No (short answer). It's covered in the video. Turning the bulb on/off regularly greatly shortens the life of the bulb.. and puts unnecessary wear on the ballast (power converter).
Thank you for basic step by step tutorial sir👍
Awesome and clear explanation. Thank you.
Very well said. Thank you.
If the sleeve gets dirty does the cylinder not as well? I was told the inside of the cylinder is shiny bouncing the light rays back. Would I not have to clean the inner cylinder somehow?
Great video! Thanks for sharing.
If I install this properly mounted in a fifthwheel RV will the bouncing of the roadways cause the quartz to break?
I was told to replace at 2 years. I did not have an alarm going off but I replaced it at 2 years, which was last week. It continues to blow the 2 3amp fuses in the controller. I called the company and they said that replacing the bulb will probably stop the fuses blowing. It did not. Why is it still blowing fuses?
what should I do if debris/water does get inside the quartz sleeve and staining happens? Should it then be replaced?
Doesn't RO filter out all the bacteria and viruses making the UV lamp redundant?
Yes, RO does all that on a much smaller scale than the 12 GPM UV sterilizer suitable for supplying water to the WHOLE HOUSE.
Is the lamp always on? Don't they turn on only when there is water flow?
You are the best =)
look like it need better bulb and ultrasound cleaning build in like self cleaning oven
Can we switch off the uv purifier after the water is filtered or it should be run constantly...
It has to be running constantly, unless you are not using it for a long time (like leaving for vacation).
If my water is treated by uv, can I use the same water for my aquatic animal?
Are they safe to dispose of in landfill or does the remaining mercury left the end of a year mean the bulbs need special treatment?
Need to be recycled as hazardous waste.
I have a question.can we use a high pressure switch to control on/off for uv light. I mean when you open faucet which belongs to ro system,the high pressure switch is turned on the uv light.so l think we can extend life span of uv lamp .
What is your comment. Thanks.
No (short answer). It's covered in the video. Turning the bulb on/off regularly greatly shortens the life of the bulb.. and puts unnecessary wear on the ballast (power converter).
Which uv chamber is recommended aluminium or stainless steel??
czcams.com/video/c00w-Q7AstU/video.html
My Viqua is leaking at both ends where the black fittings are? Help
czcams.com/video/c00w-Q7AstU/video.html
Change the O'ring on both ends of the quartz tube..
Is there another non electric water treatment? That doesn't require constant purchases
Rainwater is purified water... but you need a clean vessel to capture and store it.
Or you can dig a well into an aquifer which also contains pure water.
czcams.com/video/c00w-Q7AstU/video.html
😂😰