Multiprotocol Module: Tips,Tricks and Common Questions
Vložit
- čas přidán 2. 08. 2024
- The wiki: github.com/pascallanger/DIY-M...
My video on updating the module: • Flashing/Upgrade your ...
Updating the bootloader: github.com/benlye/flash-multi...
Frequency Tuning Guide: github.com/pascallanger/DIY-M...
My OpenTX Video on Cloning and copying models: • Multiprotocol Radios: ...
Index:
0:00 Intro
2:13 MPM Channel order
3:54 The Multi Channel Renamer Script
4:42 How do I update the Module?
6:05 How to find out if a protocol is supported
6:45 Will ACCESS be supported?
7:23 Why 'Tuning' is so important
9:08 Copying models onto a new radio
10:23 Cloning another radio so you don't have to rebind receivers
11:23 Binding tips
12:33 Bind on Channel
14:00 Summary
Thank you for taking the time to watch the video. You can find me on social media at / painless360 and / painless360
Want to support the work I do here creating content and answering questions? Please consider subscribing and supporting the channel by visiting / painless360 or you can support me by donating using paypal.me/painless360. You can also support me by using these codes for things you already buy from Banggood, here is my full list of discount codes: bit.ly/2TF9oMP
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
Thank you Lee for producing such a much needed resource for all of us.
You simply made my day today, by solving a vexing problem that had me just about to give up.
Thanks for making these videos... totally new to this and bought the TX16s as my first radio... so far setup the X8R with SBUS/smartport telemetry via a F722-SE flight controller.. . so far so good!
Couldn't' have done it without you!
Excellent explanation of the MPM tech. I've often noticed that binding with the MPM module fails if the receiver is too close (e.g. Spektrum) so moving it 2-3 meters away usually fixed that.
The Wiki and the thread on Rcgroups was most helpful for me too Lee. The recent fw for the Multi module has Skyartec's protocol however the OpenTx fw for my FlySky Nirvana has it's Multi module code from OpenTx 2.2 which only allows 63 protocols when Skyartec is 68. Wiki and the group walked me through how to change the code and recompile so I could flash it to my module. Worked like a charm.
I only recently found multi-module.org earlier this week and I can’t believe there was so much I could do and didn’t know it. Very helpful resource.
Just bought one of these.
Thankyou for the excellent presentation !
Great info, Lee! Thanks a lot! 😃
Stay safe there with your family! 🖖😊
Hi Lee,
Wow, what a terrific video.. this one really knocked it out of the park for me, since I use both the internal and external DIY 4in1 Multi-protocol (MPM) modules in My transmitter exclusively.
I think what Pascal and the 4in1 software developers have done is miraculous. No other OpenTx group has come close to providing such an incredible array of capabilities and done it in a truly opensource way that allows you to review the comments and tweak the 20,000 lines of source code and refine it further if you really need to do so.
I hadn’t known about a couple of the latest new functions either, so I’m very happy you’ve touched on them here.. but I do have one important question for you.. Yes it’s true there is a detailed list of all the protocols that are currently supported up on the github web site you referenced at least three times.. but here’s the problem.. and this is only a problem for many of us with the cheaper toy planes, boats, Quads and RC Cars and we bought all this stuff and the cheap crappy transmitters that come with them.. when we’d like to use our new MPM Transmitter with these models too.... however I’d venture to say at least 90% of us haven’t a clue what RF protocol is in the models Receiver because that’s rarely advertised. So here’s the question, does anyone have a website yet that shows a detailed photo of each one.. (Yes, I know there are several hundreds of these that have come out of China) with a column alongside each photo that tells you what protocol by (name or index number) is actually in it ? As you mention, you need that info to bind it and control it. Most of us have this problem on the older heli, quad, and other RC toys, we’ve got but find it’s nearly impossible to know which of the 80? or more possible MPM protocols we should try to use. The supported list is WAY too long to try them all..
Fact is I believe some aren’t supported yet, and many never will be, unless MPM decides to add an IR ( Infared) transceiver option.
Anyway, really great video .. thanks Again for your time and effort in putting the custom graphics, and all this key content together in such a clear and concise way.. I Love it !
very well structured overview
Another great video. Thanks Lee
Lee- you are so conversant in electronic jargon Is It possible that you were an electronic engineer in a former lifetime? You really explain the workings in a professional manner! Many thanks
Thank you Lee great info
Nice tutorial lee great video as allways.stay safe buddy.
Great information thankyou.
Lee is the Irangerx 4in1 module compatable with ranis Q7X access version. Great set of videos.
What about the INV and NOINV flavour file ? Is it related to the SBUS inverted signal on FrSky ?
Hi, thanks for the whole TX16S playlist. Is there a video on installing the Crossfire module?
Yes. In the Crossfire for beginners 2020 video..Happy flying
After watching your vid on the Radiomaster I went and bought one,silly question but scrolling thru the recieves I can bind to as I have used assan for years got those working but purchased a second hand Align M25 mini drone it came with a Futaba Fast receiver in it thought nice will bind to that but scrolling thru Futaba is not there so does the Radiomaster not cover any Futaba receivers
Hi, there is a config-h file which can be set so if the external module is used in more than transmitter the fine tune offset for different make of receiver are saved. I have spent hours trying to find and implement, if this can be explained I would be very grateful
Hi. Thank you for the great videos which make these subjects easy to understand. I would appreciate if u have an advice to my question. I aim to have the BAE Hawk edf 90 mm and i am wondering how to get the highest performance by buying the best specifications for the motor, battery and controller. Thank u in advance
Please see my reviews of EDF models and use their setups as a place to start .. Best of luck
Hi Painless360, I got a really dumb question, what are the markings on the gimbals called? I'm using the x-lite pro & there are no markings, I can notice stick postioning. I noticed on the x-lite pro, from the middle stick position to the far left or right is a lot shorter than it seems. On larger controllers it's more wider of course. Between thumb & pinching is the accuracy, I'm fly with thumbs & to change (let's say) the speed by one point is easier & precise with pinching than thumbs. I know it's just one point, but any pilot would know one point is enough to change the flight of thhe drone. Many thnx & take care
You know, I'm not sure what those graduations are called officially! Smaller radios often use smaller gimbals with less travel to support the smaller size. The sticks are often height adjustable that can help but will not make up for the smaller movement in degrees. The feel of a radio is a very personal thing, just as in pinchers vs. thumbers. Radios that have the gimbals nearer to the sides of the radio are often considered better for pinching.. Happy flying!
I have updated my multi protocol module and then updated my FrSky Receivers (XM+ and RX8R Pro). I now can't get a bind on either Rx. The FrSky download page says I have to update the firmware of radios, RF modules and receivers. Is there a particular multi module firmware that corresponds to the latest ACCST D16 v2.1.0 Rx update? If so, where do I find it?
Hey Lee, Can you suggest a good multi protocol module which supports D8 protocol and Flysky protocol (Ia6b reciever)
I like the JP4in1 module. I'd check in the wiki for the latest protocols.. Happy flying
I have the Taranis x9lite, I'm looking for an MPM that will connect with the Eachine P51 Mini Mustang (V761-1 protocol).
I got the XJT lite module, but that only seems to work with ACCESS; I can select from items under the 'multi' menu but the module does not power on.
The module works great with the ACCESS choices, so either there is a trick I don't know or I need different gear.
I'm considering a Taranis X9D Plus SE (for many reasons) -- what MPM would I need for that tx to work with the V761-1 protocol?
to be clear -- two separate questions:
What MPM will allow me to use V761-1 protocol with the Taranis x9lite ?
What MPM (or other solution, idk) will allow me to use the V761-1 protocol with the Taranis X9D Plus SE ?
I am assuming that if I get V761 i will have the ability to use all of the other protocols I see listed for MPM, is this correct?
and a big thanx for all the Painless360 work!
The Jumper 4in1 is a common choice. Best of luck
Thanks for doing these video's, my TX16S arrived yesterday ... your video's were the reason i bought one ! , i found the screen setup took me a few goes to get the hang of (i watched your video)
and the multi channel re-namer ... great ! , one thing .... the sd card .... mine seems stuck ? i cant get it out ... ! is it suppose to be push in and it springs out ?
It should just pop out as you'd expect..Best of luck
@@Painless360 Thanks for reply ... i prodded it a few more times (it wasnt moving) .... gave up and was programing models in and it just popped out ...switched off stuck it back in and its fine now :) love the radio ...
Thank your for the great info. Do you have an info or an estimate on the range on the Jumper and/or Hobby Porter 4in1? I've read that the iRangeX is stated to give around 240 m. I'd like an MPM but decent range would be good.
Range is very subjective. Antenna tuning, alignment, fine tuning, antenna position, local RF noise, quality of components, power levels and many other things affect it. Not all of the 4in1 chips output the same power either.. I have a video in the MPM series that looks at this... Best of luck
@@Painless360 Thanks for pointing out your video. I watched it. I read on aliexpress, that the iRangeX developers have tested the CYRF6936 on the (tiny) Blade mcpx and similar Walkera Super CP helis, which have very short antennas. Due to their size I doubt they have full range receiver systems. Range on these two helis is stated at 200 m ("Tested Ground Control Distance"). I'd use the iRangeX or rather the JP4in1 on my Blade 230 heli, which is equipped with the Spektrum AR636 full range receiver. I am looking for an estimate on how the range would be. 200 m is not enough, no room for reserve. I of course don't need half a kilometre for a small heli, but 200 doesn't feel right. Both the CYR-chip in the JP4in1 and in my Spektrum tx have a power output of 100 mW. So range, after fine tuning and antenna alignment as well as flying at the same flying field should result in roughly the same range, shouldn't it?
Assuming the unit you receive has the same spec and firmware and the local flying area has the same RF noise, yes it should. Happy flying!
Hi. I just ordered an Irangex IRX4+ multiprotocol module only to find out once again that the processor is now an ARM-M. Kindly point what firmware should I use for use with EdgeTX. My radio is a Radiomaster TX12 MK2 elrs version. Thank you in advance!
Dude failsafe is the most important and tricky part. Do movie about SHFSS failsafe programing on this radio!
I've added it to the list. Happy flying!
@@Painless360 Thank You. I have seen your movie about failsafe. There is a lot more tricky stuff. For instance I am FHSS user. It is different with oryginal futaba receivers and different with Corona cheap receivers. But with multiprotocol is ever more strange to me. On Corona receiver set custom value work, on oryginal futaba I am not sure. I think You might help many people if You can figure it out clearly :) Thank for you movies they are nice.
Hey I am struggling switching over from quads to wings I got the zohd dart 250 fpv ready and I am really having a hard time for some reason after I set up the 3 position switch the 1st position kept both green leds flashing and the servos were making noise every now and again it would work so I tried the 3rd position and it seamed fine so I reversed the switch so it worked normally had everything working I launched the plane 2 times nose dived 3rd time I pulled back to stop the dive went straight up in the air and went into a right stall straight into the ground cracked the nose while in stabilized mode why is it allowing full rolls any help greatly appreciated thanks
See my video on FW maiden and setup tips. First time can be tricky if you don't have it setup well.. Best of luck
Hello, I ask you if I buy a radiomaster do I have to buy the module separately or does it already have a module ...
Included, it is internal. See my review of it..
Have you tested the range and reliability of the multiprotocol modules against OEM transmitters? Any differences?
I have a video on that in the playlist.. Check it out.. Best of luck with it
@@Painless360 I looked - which one????
Does this module support telemetry on Horizon Hobby models like the Night Vapor low battery indicator?
It depends on what protocol they use. See the wiki for more information. Best of luck
Hope you can help me.
I have the Radiomaster TX12 mkii with the cc2500 mpm module. Went to update from the mpm site but there were 2 .bin listed, a 64kb and a normal one, and I didn't know which to use. I instead had EdgeTX Companion download all updates for it but I think it actually downloaded for a 4in1 module. Flashing it seems to have bricked my mpm, because now it says "no telemetry" where the version number should be, and trying to reflash with any other .bin it fails saying "FW update error device not responding"
Any help would be appreciated.
I'm not sure the process to unbrick. I'd try refkashing with the right firmware... Best of luck
hello, I have a tx16s transmitter and I was lucky enough to buy a plane with a futaba r6106hf receiver, there is an option for multi/futaba in the settings, but I can't connect it, is this even possible? I would like to ask for your advice. Thank you!
I don't use Futaba here so am not aware of the nuances. czcams.com/video/DfKyx0yTbXU/video.html may help... Happy flying
Hi, I'm really new to my Radiomaster TX16S. I don't have a external Module but would like to connect to a Spektrum transmitter for buddying. I would like the Radiomaster to be the master and the spektrum to be the slave. So my question is do I need an external module and if so which one would be correct to connect to a Spektrum if this is possible to do. TIA.
You can connect them using a 3.5mm stereo cable and nothing else. Best of luck!
@@Painless360 Thank you
Can the DJI Air Unit, a 5.8 GHz VTx and a 2.4 GHz Tx and SBUS protocol with other receivers, e.g. RadioMaster TX16s? There is a mutiprotocol module for the DJI Remote however, I want to use an OpenTX radio. Cheers!
I'm not sure what you are asking? There isn't a way to use something else as the radio with the AIR UNIT as far as I know..
@@Painless360 Sorry, I think I missed some words. I was wondering if, perhaps, they had used a common protocol. RF is RF in some since. However, it is more complicated as they are actually transceivers.
In spite of my confusing question, you answered what I was wondering.
Any chance of a tbs mpm update video? Since the mpm isn’t in agent x I have no clue how to update it and there seems to be a lack of videos on this. Thanks
I don't understand what you're asking...
@@Painless360 the mpm module has its own firmware on it from multi module.org. There are plenty of videos on CZcams showing how to update the firmware of multi protocol modules but not for the tango 2. Upon further research it looks like there is an online tool called flash-multi that should make the process pretty easy to update the mpm. The reason I need to update my mpm is I preordered mine from tbs on day 1 and it has an older firmware that’s causing issues with there newer 1.23-1.24 firmware.
I see. Not sure, I've not had one of those in here.. Best of luck!
Thank for your interesting video. I have BG multimodule Irangex IRX4 plus with yellow knob. I can update firmware and I also update bootloader with no problem. I was forced to go back with original firmware (load from backup) but now I lost the possibility to use protocol 16 to 31. It looks like original boot loader is needed. Can you help me discovering where to download original boot loader because I cannot find it and Irangex does not support me :-(
Not sure, sorry. Best of luck
the only Futaba protocol is SFHSS. I dont understand why they do not implement FASST as well....
I have a Radiomaster TX16s that is great, for one exception. I have searched and searched, and no one can inform me on how to identify which protocol my (toy grade) receivers use. I have several popular toy grade RC's, including a Sharper Image and UDIRC drone, and a New Bright truck RX that I want to re-purpose for a home made camera gimball. I have contacted the MFG's to no avail. I am disabled and on a very tight budget, so I invested in this radio thinking I could use it for anything PPM compatible forward. I'm shure this TX is capable of doing what I need, but without knowing how to identify what protocol these diverse toy grade Receivers use (which this TX is advertised as supporting) I am unable to utilize it for my intended purpose. I appreciate any assistance. Thank you.
Unless they have that in the specs of the toy then you'll need to search the forums or it's trial and error.. Best of luck!
Thanks for the video. Have bound a spektrum receiver to MPM module in the back of my X9d and notice that there is no failsafe option to set. Tested loss of signal on plane and of course throttle went to full. Plus in wiki is said this feature is not available. Really? I must have something wrong. Its just dangerous not having a failsafe function. Can you help?
I don't use DSM stuff here any more but usually the fail-safe positions on the Rx are set when the bind happens I'd check the throttle is low when you bind.. Best of luck!
At 2:40 you tell you can see the channel order of the module by going into model setup. However when I try to do this on my Taranis with 4-1 from banggood "module status" only reports "No MULT_TELEMETRY"
Not sure, I would have a look at the forums.. Best of luck
@@Painless360 Thanks for response. I ended up just flashing my multi module with "latest and greatest" and now it shows version and channel order there.
Hi I have a ts16 my first open tx things were going ok till now I cant get into model set up I can select my model but when I press mdl I get screen set up widgets setup page which I usually access from bottom switch on the left side am going nuts any help would be great
I've never seen that. What was the last thing you did before it changed?
@@Painless360 I just added a model and hit bind then turned radio off,when I go to switches test and press mdl it acknowledges both tele and mdl signal and vice versa its weird is there a way to reset radio to default
Question: I have a X-CAM quadcopter from www.flyinggadgets.com (this is an example). How I discover the protocol that it uses to program my MP TX?. Github has a long list of protocols but it is not easy to associate these protocols to actual quadcopters. Is the a trick to find this information?
You need to look at the listing or ask the vendor for that detail. If it's not there then a search in the forums would be my next step... best of luck
Will the tbs mpm fit in the module bay of a tx16s
I've not tried it but modules are only two standard sizes and it is obvious which one is which.. Best of luck.
Hi there I'm trying to help someone out who's trying to connect her iRangeX IRX4Lite multiprotocol module to her FlySky Nirvana radio. Is this possible and if yes please may you refer me to some information regarding this. We're assuming it would be possible since the radio is running OpenTX - just not 100% about hardware connections.. The rest is double-sided tape :p
The Nirvana still isn't fully supported by OpenTX so not sure what support will be in the cobbled together version of OpenTX that is on the radio (www.open-tx.org/radios.html). Once it is fully supported it will be the same as any other OpenTX radio with an MPM, probably ;)
@@Painless360 Thanks for the reply :) good weekend to you!
I keep on getting a "no sync error" on my taranis when i try to update. I double checked the firmware version.
A quick google search found this - "A No Sync error means that the module you are trying to flash does not have the MULTI-Module bootloader installed, and the module must be updated once using Flash Multi before you can update it from the radio". Maybe that's the issue? Best of luck
@@Painless360 Huh, you know what that actually makes a lot of sense! Thank you i will definitely try that and get back to you.
Wth is a wiki???
I got this FRSKY 20S and I wanted to program this thing so I could fly my RC model here in my ranch. not to fly a SpaceX or NASA rocket into orbit. Cause im not a rocket scientist…
I’m gonna return this transmitter tomorrow. This is just a bad nightmare. Couldn’t even find those menus. Very frustrating to try to switch to this radio brand. What’s the best brand ? The old one JR that works wonders. Not going thru this.
Sorry to hear you've struggled. FrSky do seem to be targeting non FPV pilots who love fixed wing and are coming from JR, Spectrum and brands like Jeti. Sadly they don't provide the same backup as those other brands.. I like radios from RadioMaster running EdgeTX but they can appear tricky to setup to a new owner, I do have lots of videos to help on those though...