𝐌𝐨𝐤𝐮𝐦𝐞-𝐆𝐚𝐧𝐞 𝐄𝐧𝐠𝐚𝐠𝐞𝐦𝐞𝐧𝐭 𝐌𝐨𝐭𝐢𝐨𝐧 𝐑𝐢𝐧𝐠 𝐰𝐢𝐭𝐡 𝐚 "𝐒𝐢𝐦𝐩𝐥𝐞" 𝐜𝐨𝐦𝐩𝐥𝐞𝐱 𝐦𝐞𝐜𝐡𝐚𝐧𝐢𝐬𝐦 𝐢𝐧𝐬𝐩𝐢𝐫𝐞𝐝 𝐛𝐲 𝐁𝐨𝐛𝐛𝐲 𝐰𝐡𝐢𝐭𝐞

This video is all about making a motion ring which was totally inspired by famous jeweler Bobby White. He is an amazing artist and his level of craftsmanship is speechless. I don't want to make the ring in a simple material that's why I decided to make a mokume-gane which is a Japanese technique of fusing two or more nonferrous metals together. In my case, I use two different metals brass and copper. Mokume has a pretty high rate of failure if you are using brass because of their different melting points and that thing makes it a bit more difficult to make. But one more advantage is that it's not that expensive so you can take that risk. I made this material two times in the past and every time it's difficult to make something out of this material in one go. Since this is a layered pattern material that's why I decided to add two different patterns in this ring and that definitely gives it a much more vibrant pattern when you open up that ring that vibrant pattern can be seen all around the ring. Definitely, if you have some Jewellery tools like a rolling machine then it saves a lot of your time and is able to make perfect jewelry. One thing which I didn't show in the video is the annealing process of the material during the making process of the jewelry. This is an important process while making jewelry. Now, most of the nonferrous act differently and to soften them you need to dip them in water after getting red hot. The rest of the process you see during the journey. If you have some more tips and tricks to ease the process then surely post them in the comment section down below.
‪@BobbyWhite‬
𝐌𝐲 𝐨𝐭𝐡𝐞𝐫 𝐉𝐞𝐰𝐞𝐥𝐫𝐲 𝐁𝐮𝐢𝐥𝐝𝐬
𝐌𝐚𝐤𝐢𝐧𝐠 𝐚𝐧 𝐄𝐧𝐠𝐚𝐠𝐞𝐦𝐞𝐧𝐭/𝐰𝐞𝐝𝐝𝐢𝐧𝐠 𝐑𝐢𝐧𝐠 𝐟𝐫𝐨𝐦 𝐌𝐨𝐤𝐮𝐦𝐞 𝐆𝐚𝐧𝐞 - 𝐀𝐧𝐜𝐢𝐞𝐧𝐭 𝐉𝐚𝐩𝐚𝐧𝐞𝐬𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐪𝐮𝐞
• Making an Engagement /... ue
𝐓𝐮𝐫𝐧𝐢𝐧𝐠 𝐒𝐭𝐚𝐢𝐧𝐥𝐞𝐬𝐬 𝐒𝐭𝐞𝐞𝐥 𝐖𝐞𝐥𝐝𝐢𝐧𝐠 𝐄𝐥𝐞𝐜𝐭𝐫𝐨𝐝𝐞𝐬 𝐈𝐧𝐭𝐨 𝐃𝐫𝐚𝐠𝐨𝐧 𝐁𝐫𝐚𝐜𝐞𝐥𝐞𝐭 𝐮𝐬𝐢𝐧𝐠 𝐬𝐭𝐢𝐜𝐤 𝐰𝐞𝐥𝐝𝐢𝐧𝐠
• Turning Stainless Stee...
𝐓𝐮𝐫𝐧𝐢𝐧𝐠 𝐒𝐭𝐚𝐢𝐧𝐥𝐞𝐬𝐬 𝐒𝐭𝐞𝐞𝐥 𝐇𝐞𝐱 𝐍𝐮𝐭𝐬 𝐚𝐧𝐝 𝐁𝐨𝐥𝐭 𝐢𝐧𝐭𝐨 𝟓 𝐂𝐚𝐫𝐚𝐭 𝐄𝐦𝐞𝐫𝐚𝐥𝐝 𝐑𝐢𝐧𝐠 - 𝐁𝐲 𝐀𝐌𝐛𝐫𝐨𝐬 𝐜𝐮𝐬𝐭𝐨𝐦
• Turning Stainless Stee...
Carborundum Universal Limited
www.cumi-murugappa.com/
Contact salesperson for inquiry of the products.
[phone]
#mokume-Gane #bobbywhite #engagementring

[@kokovas]

something new to learn. it looks like a layered crepes pancake

[@metalsmith11]

Okay, That was INSANE! Doing Mokume Gane is difficult by itself but to do it with those two metals and then to add it to that very hard design is INSANE, Great work!

[@ambroscustom]

Thanks for the words brother 🙏. Appreciate your feedback.

[@vagishgpatil3013]

Thts a beautiful piece of art and.. a lot of work

[@ambroscustom]

Thanks brother

[@leonardomapache]

Amazing.

[@ambroscustom]

Thanks mate:)

[@thejusprakash7164]

Grate work bro 👍

[@ambroscustom]

Thank you so much 😀

[@BALISAKRALCHANEL]

Hadir boskyu

[@dorritsmedsgard5900]

Very fine piece.

[@ambroscustom]

Thank you 😊

[@vulcanknights]

@@ambroscustom Anytime. I am also an American jeweler/fire performer of Scot/Irish/Native descent who went to school for jewelery design and video production. The video editing & audio production of this mini film is EXCELLENT. The craftsmanship is JAW DROPPING. It was very humbling to watch it. It's playing for the 3rd time as this is typed. If I were in Ireland, I would request an apprenticeship under you. Amazing job to everyone.
Warmly,
Sarah
Sunshine Phoenix of The Vulcan Knights

[@ambroscustom]

Thanks 🙏 for your generous feedback, your words means alot to me.

[@ians9390]

are the rings cut through straight or at an angle?🔥🔥🔥

[@ambroscustom]

No dear you need to cut them at slight angle so that they can open only one way and locked at other way. Cutting straight also work but you need to maintain certain gap and movement went on both sides.

[@ians9390]

@@ambroscustom Thank you my friend. What about the placement of the 4 holes? Just spaced evenly, correct? placement not important ?

[@ambroscustom]

No dear those placement need precisely drilled other wise entire thing got jammed and not going to open that good. Recommend you to drill the holes first and then do the cutting operation. Thanks 👍

[@ians9390]

@@ambroscustom thank you

[@DHRUVDJAIN-pk3mn]

Bhai kya rate padta hai

[@ambroscustom]

16000 hai dear ring ka price. Brass and copper hai material.

[@DDV_Fshing]

Stolen from Bobby White

[@yessir3579]

Bud he literally credited him dummy

[@chrisbrug7924]

Relax. Its ok. I made it to. Many of them. So what?

[@chrisbrug7924]

@@yessir3579 so what? Life is hard. Deal with it. Spit out your mothers tit and grow up. Life is unfair