Experiment Parallel inverter non SYNC...what happen?...KABOMM Part 1
Vložit
- čas přidán 19. 05. 2020
- this is my stupidity experiment parallel inverter without syncronize...end of kabomm...haha nobody dare to try like this ....but i dare make it and show for you.... what happen if you do it like this...enjoy the vids
- Věda a technologie
Brother it was not an a stupid experiment it was a worth experiment for the electrical and electronic technicians and engineers.
No such thing as a stupid experiment in my view. Thanks buddy.
Thanks for sharing. You have lost 2 inverters for us! Thanks man! Hopefully, subscription will compensate that!
This is not stupid this experiment worth millions, you lost 2 inverter for us, Thank you for this & Please if you can make a tutorial about synchronization of two inverters
Man your experiment is great to learn from! thanks guy.
Thanks bro, I learned a lot as a technician
thanks for your sacrifice bro.. worth it experiment
Thank you bro..You are awesome, many of us will try if not for you. Very much appreciate your Experiment 👍
Wow you share it very clear.hope yotube will pay your verry nice expirement brother
Try turning them on one by one first with a 100watt resistor in series on one of the wires , interesting experiment ,,a great sacrifice for scientific community watching it .
I've always wondered what would happen. 😅 good job. Just maybe next time set the switch/breaker a bit further from the inverters. Haha.
It was a great experiment bro
Now please do a video where you do just like what you said: synchronize them;
OPEN them up,modify them ,one master one slave, so that both outputs are in sync,then put the lamp BETWEEN them, in series,and if the lamp does NOT light (no current flowing),then hook them up; better with a dual trace oscilloscope...we'd love to see that.
LOL, that was what I expected to happen but never had the courage to do it myself! thanks bro
thanks man!!! I had been searching for this for a long time
Omor, it's not a stupid experiment. Thanks for this 👍👍
Very good 👍🏼👍🏼👍🏼👍🏼 didn't need to experience that wow
terima ksaih banyak Bang sudah mencoba ekperimen ini, dan manfaat untuk orang lain adalah agar jangan melakukan hal yg sama ..... dan akan fal akibatnya. trima kasih semoga sharenya banyak manfaatnya.
I always wonder and I was to afraid to do it my self thank for video
Thanks to your Experiment...
Thank you. It was nice to see, now i will never forget.
Thank you for this experiment i learn a lot.
Thanks for that experiment,
Am so sorry for that damage
Lol 😂 oh really you lucky caught on fire 🔥
tbh, I expect some explosion hehe. nice demo!
Nice experiment bro.unfortunately for two power inverter.this also can give me knowledge.thank you.
Thanks for taking it for the team, 😜
I wonder for a long time. Thanks a lot for your sacrificing. Let’s see the solution.
You successfully converted one inverter into a bird bell 🎉🎉🎉🎉
You are genius bro 😂
Thank you saved me 2 inverters new subscriber.
Thanks Bro for good experiment.
You saved me from killing my invertor. ✌👊
Thank you, this is very helpful.
Good job
Thank you for experimenting
yeah... this really didn't need that experiment.... but funny to see!
Salute you tought mi some sence I wanted to try
Wait for your vedio
Great work at least we see the output
Thanks for the experiment
Thank you though; It is a good to know and sure it was not easy to lose two inverters !
Hi there this is not a stupid video I see you've got about at 81 comments you've taught us what not to do,cuz I was about to do it with 2-ups thanks yor
Thanks I learned a lot from it
Great bro
But we can parallel connect the 2 inverters to one source of battery to atleast distribute the loads to both inverters?
I bought a vevor inverter very expensive and should do 3kw peak 6kw. I used it alone not with another and used max 600w on it and after a month smoke came out and it was on fire. Would like to build my own or use a lot of cheap ones say 150w ones to make a string to make up the lot. Anyone has any ideas on how to do this without blowing it?
Good R&D
Could you set them up like you would parallel a generator plug parallel cables plug and turn on one inverter and the turn on the second one. Woul that sync them? Not have them on before you connect them but after. When paralleling generators you don’t fire them both up and then connect them together
U helped many others
Nice
masak o inverter..mahal pulak tu🤣
Budget Electroboom over here...
so how do you synchronize two inverters of same frequency and same voltage?
yeah booth inverters start working as referse inverters :P and that probably burnt tcoils and mofsets makes sense.
so probably we need to disable one of the control signals and use only one of mofset drivers circuits instead ... ie copy /paralel connections from one mofsets gate plus and negative signals to other. so signals will be in sync. and probably even on alternate side polarities needs to be checked. as for mofsets its polarity switching circuit which means they are actually still dc on input and output. if you consider 50hz timings
OK. Now do synchronisation project thanks
🤣 that awesome
I would expect to see this video on ElectroBoom channel.
Nice i try to in my inverter
You saved my life
Thx for this exanmple how not to do things. i have 2 cheap 150 watts and was wondering if one could ac in parrallel. I guess only if the wave forms are synced. Now i am sure never to try this 😀
Thanks i am wondering what will happend😅
thanls I learned a lot from it 🥰🥰
You are genuine thanks
Are you sure Phase and Neutral each inverter connection?I did not see using tester that phase or Neutral.
@wajaeboseben AGS TECH
Thoes inverters can be joined together but you have to do it from the inside👍
Well thanks bro
Thank you your the sacrifice
You are crazy Man
Good inspiration . For this experiment , conclusion is strong old will burn out the weaker one. either one will death. what if we make them in phase?
How can we success among two inveerter synchronization
God bless you !
can you do a video about parallel offgrid and grid tie inverter?
First of all thank you for the experiment .but wait a minute what about positive to one inverter and common shared to both inverters for your power into the inverters and then use your sync harness .do you think it's a possibility?can you share a sync video with us on how to master slave ???????
What you can do is:
Open both the inverters. Connect the DC side 300V capacitors of both the inverters in parallel and you're done
I don't think that would help. The issue is with making both inverters run with the same frequency and phase
@@cmnk8840 i am suggesting dc side (before the h-bridge where 370VDC are made). On dc side there's no frequency matching or synchronization issue
@@TechnoEveryday I understand your suggestion to parallel on the DC side. But that would not help because, after the DC side is the inverter stage on both inverters where both the inverters would run without synchronisation which is the main problem here.
@@cmnk8840 hmm i saw this somewhere on CZcams
At least you should check positive and neutral side of both
many thanks, not stupid, breaking things is good
Thanks I was about to try the same 🤦♂️
Not stupid. We are all learning. Thanks.
Actually it was stupid and waistful , You could have just read the manual ! The manual tells you weather they are capable of this or not ! They even say why there not able to do this ! So if he would have just read the manual or looked this information up online he could have learned the same thing without burning up the equipment ! WOW ! I am never shocked anymore .
Enjoyed it
Not only do you have dead inverters, but apparently you're missing the left and right hand sides of your video camera as well.
Very stink indeed. Thank you for showing this to us
Can you try a gridtie to a offgrid inverter?
😄😄😄😄
Thank you!
They weren't in phase, obviously, so you got an overload.
I see red and black wires and wondering - are you ElectroBoom YT channel, or what? :D If you'd not reverse the polarity, maybe it would not blow ;). I'd say for sure would not blow.
Would it make any difference if you powered one, then connect, then power the second? I am fairly sure they need to be "syncable", i.e. smart enough to look for and sync to a sine wave. Thats how you are supposed to sync portable inverter generators, but definitely no expert. It was fun to see the magic smoke though!
How to syncronize 2 inverter ?
Open both the inverters. Connect the DC side 300V capacitors of both the inverters in parallel and you're done
please make a video for detail
I will do thumbs up for you
Thank you for your sacrifice
So what happened?Why did it blow?
Thank you so much 😢
no, you should have done it in series on the dc side
😂
I connected mine parallel to nation grid in house for emagency when electricity cut off when electricity came back kaboooom😅
wow, fried it!!!
I thought it will increase current 😂
Il faut une diode anti retour ac comme pour les panneaux solaires qui est en DC mais paraît-il que cela n' existe pas pour le moment.
You let out all the smoke. When that happens the devices quit working.
thank You Bro! sorry abot that..