Amazing Miter Saw Upgrade! How to build video
Vložit
- čas přidán 28. 09. 2022
- This video is about My Digital Miter Saw stop! It works amazingly and is an awesome upgrade for your miter saw.
In this video, I show you the benefits and how I made it.
All my videos are on my website, including free plans when available. But also a ranking among all products I tested with direct links. So visit: hookedonwood.online/Home/
Links to the products shown in this video:
Miter stop (analog)
www.banggood.com/custlink/vKv...
This is a perfect miter stop, but also works as a fence on a table in combination with a track-saw.
Digital read-out meter Gray.
s.click.aliexpress.com/e/_DEj...
This one has a shorter cable and is easier to use if can not make it shorter yourself.
Digital read-out meter white
s.click.aliexpress.com/e/_Dem...
Miter track sliding bar
s.click.aliexpress.com/e/_DkD...
I used this to connect the Miter stop to the base
Miter stop
s.click.aliexpress.com/e/_DEY...
I used the golden screws from one Miter stop. But this is perhaps a bit expansive for just the screws.
Spiral bits.
A must-have bit, it comes in different sizes and is very affordable and of good quality.
The small ones are perfect for cutting. They are very affordable.
This link is to Aliexpress, where you have the most choice. The Vendor this link is referring to, Is where I bought my spiral bits, so I do know the quality of these is great.
s.click.aliexpress.com/e/_Dlj...
Bigger spiral bits. 12mm and 12.7mm
s.click.aliexpress.com/e/_De1...
Setup Blocks
www.banggood.com/custlink/v3m...
I use these setup blocks a lot. I like them a lot, and are so nice to measure and set up your tools.
-----------------------------------------------------------------------------------------------------------
My Personal Banggood favorites all time!
1. Hongdui Edge Trimmer
www.banggood.com/custlink/GGK...
2. Doweling Jig / Multi-row puncher
www.banggood.com/custlink/KDv...
3. Kerfmaker
www.banggood.com/custlink/vDD...
4. Drill guide cabinet jig
www.banggood.com/custlink/KDD...
5. T-ruler
www.banggood.com/custlink/3GG...
6. Precision square
www.banggood.com/custlink/DKv...
7. Miter square
www.banggood.com/custlink/GmG...
8. Miter square brass
www.banggood.com/custlink/vmG...
9. Height gauge
www.banggood.com/custlink/KGG...
-------------------------------------------------------------------------------------
My name is Dennis, and I am from Hooked on Wood.
Subscribe to my channel!
czcams.com/channels/uvj.html...
My CZcams channel is a hobby. This means I try to upload 1 a 2 video's a month. But this is not at a specific schedule. So If you do not want to miss my videos. Subscribe and click the notification.
Products I use in my workshop.
Table saw with dust system:
Felder K740 S slider
Workbench:
Incra master-R-router lift
AEG 1400w router
Incra 25" SL positioner with Wonder Fence
Drill press: Jet JDP 15B
Miter saw: Festool Kapex 60
Different links to products I use
Clamps:
Axminster trade hold down clamps
Piher Rail guide clamps
Micro Jig dovetail clamps
Bessey parallel clamps
Axminster trade parallel clamps
Push blocks
Micro Jig Gripper
Incra Push block
Thank you for viewing.
Best regards,
Dennis - Jak na to + styl
Two words .... Next Level
Thanks Dennis! I love your enthusiasm and your joy of building!
Love your enthusiasm and your mitre stop.. excellent content. Thanks
As always you inspire with your projects.
Totally awesome! Will definitely build that into my mitre station. Thanks Dennis
Thanks for making and sharing. Well designed system you have there.
Crisp and clean fixture design. ✌ 😃
Great video for a great miter station. Love your design and the digital readout! Thanks.
The pace of your presentation is always ideal. Very good!
You knocked it out of the park once again!! I just love the accuracy you build into everything you do.
Excellent video. And really nice workshop!
Great job Dennis!
Thanks for the video, been dreaming of building it for a while now and finally finished today!
Every Time a Pleasure to watch your Videos
great design dennis
Excellent work. Thanks
Next level content on this channel! 👍🏾
Another very enjoyable watch and I must say your making skills are a factory finish. I’m in love with that fence on the festool. That’s something I need!
Thank you👏👏
Can't wait for the next part of the video, because I have to build a dust collection for my miter saw ;-))))
I wish I could just hang out with you in your shop for a day... ha ha.
Another great video/project! You come up with some great ideas.
Great Video Dennis!
my compliments !
you are absolutely amazing!!! it is always a pleasure to watch you
Perfect work 👍
Best greeting from good old Germany. I like your work
Your content is phenomenal Dennis! This is fast becoming my favourite channel for woodworking tool reviews, unique ideas etc. Also really like how your self-made tool upgrades look very professional. On other channels, the DIY tool upgrades/jigs often look very raw and generic. Many say it only matters that it works the way it should, but for me, looks are almost as important as functionality. Keep up the fantastic work! Warmest Regards from South Africa 🇿🇦💪🏼
Great video, even greater concept. I Iiked it very much.
I really wish that valchromat material was available in the US, it looks so cool
That's not a workshop, thats a sicence laboratory. 😊
I just love the detail and accuracy that you build your set ups.
What a super accurate station and so we’ll thought out and always well executed. It’s taken you awhile in setting up shop but it is looking awesome and buy that huge smile on your face I can see you are enjoying every step along the way
Really powerful ! Really nice Damn !!
Another great video
Great!! Tanks a Lot för this 😉
Good work. We shared this video on our homemade tools forum this week 😎
Wow great! Thank you for that🙏
@@HookedonWood You're very welcome. Let me know if you want a free forum membership ($69/year) and you can post your videos on our forum whenever you want. We have many YTers doing the same.
Brilliant work, Dennis! It really turned out fantastic! 😃
Stay safe there with your family! 🖖😊
Well done Dennis / Goe gedain
this is excellent work Dennis! I am so curious how you get such good dust collection on your miter saw using a zero clearance fence. My experience has been quite different.
You are such an inspiration - your work is close to perfection! I look forward to every new video! many thanks for sharing. You would certainly also enjoy a Shaper Origion - perfect for use with grooves : 7:36 😊
Very cool 😎
Top Dennis!!! Another fine video - awesome setup - phenomenal - clever, innovative and beautiful designs - love your enthusiasm - you inspire - another excellent video and conceptual design - you continue to innovate, inspire and educate - being so cheerful makes us happy - …as you can see we’re all hooked on hooked on wood - merry Christmas!
Thanks for your comment. Very motivating for me 🙏
Missed these Dennis. So informative and entertaining!
I found this channel the other day & I literally woke my wife up for about 5 min to talk about how I had found something incredible and it had really inspired me. My problem has always been that my creativity far exceeds my confidence in my own abilities, and one can imagine that leads you to doubt your own ideas and look for others to confirm your own or inspire them for you. After watching several videos (I went full alice in wonderland that night), I came away with some amazing things I can apply in my new shop, but more importantly it showed me how that lack of confidence has poisoned my ability to create and make my own mark on things. Thanks
Sorry for my late response. Thanks for your comments. Liked it:😀
This has to be one of my favourite videos of all time! The digital readout is perfect and just like a Format 4 or even a Felder but without the extra tens of thousands of dollars, but still looks very impressive.
I have watched a ton of videos on shop projects and I've found it rare that anyone has a new idea or innovation to add. This was the rare exception. Thank you! Like always, you've elevated the shop game with your clever, innovative and beautiful designs. I love your design and am thinking about incorporating it my shop but I am concerned I'd miss the ability to use two stops (i.e., no flip stop). If the digital read out is really that accurate, I don't think it will be an issue as it looks like it would be pretty easy to dial in the exact measurement as before. However, I wonder if you've thought of a way to possibly have two stops. Was there a two stop design you were pondering that didn't make the cut? Thanks again!
Well, that was one of the advantages with a flip stop. Making this a flipstop would be too complex. It would have be possibly to add a flipstop, but then I loose the possibility to slide it till zero. So it is a compromise.
Very interesting.
Hello Dennis. And thank you for another video. Seeing you work and always being so cheerful makes me happy. I have made some purchases based on your reviews. Cheers from Finland!
Will have to rewatch several times to grasp all the information presented here. This project is well worth doing. Thank you.
Great stuff Dennis (as per your norm). Very innovative.
Love your work and videos are informative and entertaining.
Great video! Very informative! Thank you!!
I wonder if I can use this for my table saw, I would love a drop on that
As always amazing videos and quality work
Another fine video. I particularly like the way that you often edit to show the end product during the stages of its construction. That's really useful to give us context.
Keep them coming!
Fantastic, I will watch a few more times. This is true engineering. This is working to very fine tolerance. Getting the gaps tight. The end product become better and results more pleasing. Love it.
holy shit! thats awesome!
Amazing idea! Take the guesswork out of the equation. What is the magnetic strip in? From the links I don’t see any thing that would work? Again thank you!! Keep them coming
Ein wahnsinnig funktionales, kreatives und qualitatives Produkt! Immer wieder ein herzliches Dankeschön, dass Du uns an deinen Ideen und deiner Begeisterung teilhaben lässt! 👍👍👍
What can I say, it is precision that I have not seen from any other woodworker. Very cool. Thanks
As a new woodworker with a small space I was inspired by your previous workshop and invested in a collection of Incra products for my router table, mitre fence, etc. Looking forward to your mitre saw dust collection ideas!
Hey Dennis,
Thank you so much for your great ideas. For months I was thinking about a good idea for my miter saw stop and no solution was nearly as good as yours!
For that reason I can‘t await to see what your solution for the dust extraction will be.
It is always such a joy to see you work and the great results.
Keep it up and all the best.
Ray
Hi Dennis. Thanks for video. It is great precise measure tool and of course perfectly precise execution ;-) As always great inspiration, thanks.
First! Love the videos, Dennis. Always great work.
goed bezig dennis groetjes uit arnhem
Very Cool! Motivates me to make one for my mitre saw.
Looks like a great design - One thing I didn't see was how you matched up the magnetic tape to the width of the slot in the miter profile. Is there a link to the profile you chose? i believe there is very little height and alignment tolerance for these. Looks like the Grey meter model doesn't ship to Canada.
Dennis - another excellent video and conceptual design. Is the digital gauge only in metric? Or imperial & metric.
My bench is 20 feet long. Where and what do I buy to get longer magnet tape?
Great work Dennis, and as always, I enjoyed your presentation and delivery. Looking forward to see what you have in mind for Dust Collection! You never disappoint in coming up with well thought out solutions.
Hi Denis, this is such a wonderful video and a really creative idea on your part....I hope it brings you lots of joy.
A few questions regarding the digital reader you recommended:
- Does it come with the metal base that you use to secure it to your stop? Their website does not suggest that it does in their photos but it does show it in the videos.
- Is it meters only or does it support inches as well?
The idea to go directly to the blade, as a reference, makes so much sense and solves a lot of problems when trying to construct/install a miter stop system and if it ever gets knocked out of alignment you can simply adjust it back to the blade. Brilliant! Thank you so much for sharing this.
No, it comes not with the base. I will try to find the link.
It is metric and inches as well. nl.aliexpress.com/item/4000982030138.html?spm=a2g0o.detail.1000014.6.5bb9658cj3RscD&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40000.267768.0&scm_id=1007.40000.267768.0&scm-url=1007.40000.267768.0&pvid=3af0dd29-1785-43e2-85f5-a174d44deaa5&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40000.267768.0,pvid:3af0dd29-1785-43e2-85f5-a174d44deaa5,tpp_buckets:668%232846%238107%2322&pdp_ext_f=%7B%22sku_id%22%3A%2212000029546627775%22%2C%22sceneId%22%3A%2230050%22%7D&pdp_npi=2%40dis%21USD%2132.66%2114.7%21%21%21%21%21%40211b5e1d16646563951308339ec43b%2112000029546627775%21rec
@@HookedonWood Thank you Denis. I am appreciate your responding and all the hard work that you put into making these videos.
Where did you get the track that you used for the magnetic strip?
As always, amazing work! It is such a pleasure to watch you create. My next build will be a derivative of your drill press table.
Now I need a bigger workshop. I always clamp an aluminium profile to my miter saw for lack of space for a more permanent solution. But this build makes me want to rethink my priorities :D
Great engineering, Dennis.
Great video! Can you tell me how long the analog miter stop from Banggood is? Can´t find that information on Banggood. Thanks!
Awesome Video.
Great ideas and excellent work as always.
You are such an inspiration.
Looking forward to use some of your ideas for my upcoming workshop.
Man Dennis your shop is really coming along great. Super clean and very aesthetically pleasing.
-Ben
Dennis, Super uitgevonden heel erg creatief, wederom een geweldige video.
I looked into M1 Caliber and ProStop and one not feasible and the other too expensive. I'll check this one out.
Dennis, as an aspiring wanna be wood worker, I absolutely love your precision and accuracy.
I know that having excellent tools definitely helps, really enjoy how you have always strived for excellence.
Hi Dennis!
I’ve got a question about the readout. I would like to use it with a flip stop, which stops e.g. 30,0cm away from the saw blade. Is it possible to calibrate the readout, so it says 30,0cm on this position, or can you only set/calibrate it to zero? (Can you set it to a given numer) Hope you understand what i mean.
Great job again man, can”t wait to see your dust solution.
Greetings from bavaria
Dominic
Hello Denis, perfect video as always and it was nice to see you excited also about it :) Pls what kind of t slot track you use, so there is no play for the sliding bar and also the LED track? Thank You so much
I can not place a link at this moment because I have problems reaching this part of the bang good site. But it is just a standard 30mm Miter track. For the sliding bar, I placed a link in the description. These do have some play. But when you tighten them, they stay pretty solid. LED strips are just basic led strips with a flat surface (cover)
I noticed that you use a lot of that black MDF-looking board. Is that material stronger and more durable than regular MDF and plywood?
Ha Dennis welke track gebruik je,
Thanks voor alle tips en tricks gr geert
where do you buy that black MDF ? is it available in the US ? thanks
What does he mean when he says Led strips? Currently setting up the same thing, not yet received the read out meter, is it an aluminium track to house the magnetic strip?
That is precision! Just like the Incra fence system! I am looking forward to the dust extraction video for the miter saw! I have seen many and very few where all that good. The miter saw is difficult to tame when it comes to dust extraction.😁🛫
Weer een goede video! Man wat heb je een vaart. Erg inspirerend, ik ga zeker wat van je ideeën gebruiken voor mijn werkbank. Ga zo door 👍
Still waiting for the kapex 120 insert dennis ;-)
how long is the tape that comes with these? i can't seem to figure it out. i really would like it to be 12"
Thanks Denis, another inspirational video.. my retirement plans are taking shape :)
Please post a link to the digital read out holder when you get a chance Dennis. Many thanks
nl.aliexpress.com/item/4000982030138.html?spm=a2g0o.detail.1000014.6.5bb9658cj3RscD&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40000.267768.0&scm_id=1007.40000.267768.0&scm-url=1007.40000.267768.0&pvid=3af0dd29-1785-43e2-85f5-a174d44deaa5&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40000.267768.0,pvid:3af0dd29-1785-43e2-85f5-a174d44deaa5,tpp_buckets:668%232846%238107%2322&pdp_ext_f=%7B%22sku_id%22%3A%2212000029546627775%22%2C%22sceneId%22%3A%2230050%22%7D&pdp_npi=2%40dis%21USD%2132.66%2114.7%21%21%21%21%21%40211b5e1d16646563951308339ec43b%2112000029546627775%21rec
"When things go wrong its mostly just a lack of patience"
every project I've ever done
Mooi gezegd.
Awsome job 👍 what is the material that you used for your table tops?
That is what we call, full colored MDF. It is a no-brand material. It is comparable with Valchromat, but a lot cheaper. Unfortunately, not every available. I pay around 100 euro for a sheet.
Awesome setup Dennis! Btw, did you 3D print the holder for the digital read-out? If so, could you share the STL file please?
No, sorry it bought this box
Only drawback i see is that the display is attached to the stop itself. So if the stop is 10ft away you have to walk 10ft to move and read the display. The reekon m1 is attached right on the saw fence for easy reading and no walking.
a question about the position readouts, can you set/reset the zero on them (like the tare function on scales)?
You can zero it on every position.
Hey Dennis. Just wondering I you ever use/review power tools from Banggood, particularly Hongdui?
No jet, But I will look into it.
Maybe you could add a small solar panel (similar to a calculator) and it could give just enough voltage to keep it alive? Or increase the battery capacity.
When I have to change it ones a year it is not a problem for me.
Flexing the new Ultra apple watch I see 😮
I have to put it to a test, but I consider it capable enough for some good woodworking :-)
Dennis, at 10:10 you say you are putting the magnetic strip in something but I can't quite catch what you say, is it LED strip?
Yes, it is a track we place a led strip in. This fits perfect and give protection against dirt
@@HookedonWood ok thanks. I'll try and find something similar
Dennis.... love your video's! I'm not sure whether I'm missing something, but my OCD is kicking in. @1:53 on this video, and every video I've seen of yours recently, your "DON'T FORGET TO" overlay is incorrect???? You have it as DON,t FORGET TO..... Should it not be DON'T FORGET TO??? Again, if you're doing this for a reason, I apologise! But honestly.... I absolutely love your video's! They are really great. Stay safe!!!
Dennis- you continue to innovate, inspire and educate. Thank you for all of your hard work behind the scenes to bring us such world class educational content. I love this gauge- just in the process of building a new mitre and drill station bench so the timing was perfect. Did you “fix” your drill station bench or does it slide in and out like your last workshop to allow the extra height?
This time my the surface is fixed. I never needed the capacity so far but when i would fold the drill press table out of the way and use the workbench table, i have even a larger capacity. Because the original drill press table did not goes deeper than the workbench top. So, it is not needed at second thought
Thanks so much for the quick response... will make my upgrade a little simpler!!