How to replace a wheel bearing with a cheap 6 ton press
Vložit
- čas přidán 2. 06. 2024
- How to replace a wheel bearing with a 6 ton press. All stages: hub removal, extraction of the bearing, new bearing refitting, hub refitting with the press. Use of a cheap 6 ton hydraulic press.
This video does not constitute or replace a real specialized technical manual, and was only made for convenience and educational purposes. "TutoBuild Eng" makes no warranties of any kind and accepts no liability. "TutoBuild Eng" cannot be held responsible for any damage caused to devices or persons using information contained in this video. The use of the information contained in this video is at your own risk. - Auta a dopravní prostředky
Thank you for honest unedited video . Now I know a 6 ton not enough, 12 is on my bucket list.
Terrific work, ty so much for sharing
I keep coming back here to hear:
"Actuate the lever";
"Six tons is not enough pressure to press the bearing out of the hub".
Love it! Fail Army!
Great work, very well made video. Thank you.
fantastic vids thanks
thank you
Nice video 👍👍👍
Good video
WOW Great Mechanic👍👍
You do know you don't have to take apart the center bolts on the carrier on the press when you want to raise and lower it? - just move the side pins out and raise/lower the shelf.
Surely this video should be titled 'how not to change a wheel' 🤣🤣🤣
or use a 12 ton press without the struggle.......
Leever, boosh, ridtrieve and drivshaft lol all joking aside thanks for the info
Wow! That force you were exerting, looked like you were lifting 6 tons. I guess more is better in this case.
Where u buy shop press ?
harbor freight
Evan M I got them ... easy work! Thanks
so the moral of the story is.....get a 12 ton press!
мужик сделай видео как поменять подшипник колеса БЕЗ специальных приспособлений. как это делается в деревне настоящими мужиками. когда в сарае есть только ключи с головками и молоток.
So much for "Do I really need a 20 ton press?"
Пыльник на шаровой опоре рычага вышел из своего посадочного места. Так и собрали.
Я вообще думал,что только мы хуячим кувалдами.
That screwdriver technique ended up bending my Circlip pretty bad because It was so thick and difficult. Maybe for demo just use the proper pliers next time (Which I forgot about until It was too late) to save the odd few accidents like I had. Cheers, great video though
Few things here the hub nut was over tighntned with rattle gun then touqued up rong way also by pulling up on rench rather putting your back out rather than pushing down on rench is much safer and easier notice it didn't turn it clicked straight away wich means it was overtightned and you should not use sockets to push out bearings bearings with abs magnetic rings should not be out in freezer as the crack bit of a odd job DIY way of doing it not the right way
Great Info, cheers
Hate all those adds!!!!!!
Jesus get rid of the text to speech crap.
1.08 lol