To-the-point, and made a considerable difference. Over the years you forget how fierce the original spark is, I didn't think the spring was weak at all. Thank you!
you are one of my favorite people on planet earth. for a whole week now i have been bruising my thumb trying to light my zippo. i searched many times and was told to do things like use more zippo fluid, shorten or change my wick and replace the flint. nothing worked but now i can light with ease. i will never forget this solution, much love ❤❤❤
I think i see what was actually causing the problem, that spring is supposed to have a metal follower attached to it that actually pushes on the flint and it looks like yours is missing. Stretching it seems to have replaced the missing tension, replacing it with a new one should also fix the problem. I can still see this helping add tension though, i will remember it.
Kept overfilling my new Zippo because I couldn't figure out why it wouldn't work consistently. Did this and it fired right up. Appreciate the research!
Ive been zippo collecting for the last few years. I have one thats a bugger always acting up rather its trouble lighting or rusting the flint wheel or going dry. I lost my good zippo so i grabbed this one to get me by until i find it. Filled it and noticed it didnt want to light good. Tried the spring trick and worked like a charm. Thanks a bunch 🙏.
Thank you brother, I have had the same issue with my 3 year old zippo now for almost a year and that fixed it. I was ready to trash it after replacing the flint, the cotton for the fluid, the wick, the fluid and the flint.
Great video one goofy thing I did was stretched it too much first time. Just watch how in this video it’s only stretched couple of times so the length is not increased so much pushing it back becomes impossible. So I then destreteched it a little so the length was like in the video. Now it’s working like new.
FINALLY!!!! Someone trouble shooted vs tell us how to pour fluid, thread a wick through a hole and palce a flint in a tube and watch it make a flame…..Thank you beacuae all this time it was the spring that was weak causing a weak spark and need to be stretched. Fixed it perfectly as I was about to throw it in the garbage..
i cherish the zippo my cousin gave me and i even got one for my bro in law but honestly i prefer my imco junior 6600 from austria more reliable on the first if not second flick to light easy to carry and a conversation piece with its unique look and flick open lighting
the bottom on the old ones has a bit of a recessed edge the new ones are flat , btw mine say xv so 15 i guess but what year would that be from if you know? my cousin gave it to me back in 2000 but i was used so i know he had it from the 90's
I fucking love you dude, thank you so much!! I brought today 2 zippo lighters from a guy and one of them was working normaly and the other had this problem, and tried all the methods posible and nothing worked and I started feeling so bad because i thought i got scamed until i found your video and now i feel și much better, thank you once again for your video and God bless you!
To-the-point, and made a considerable difference. Over the years you forget how fierce the original spark is, I didn't think the spring was weak at all. Thank you!
you are one of my favorite people on planet earth. for a whole week now i have been bruising my thumb trying to light my zippo. i searched many times and was told to do things like use more zippo fluid, shorten or change my wick and replace the flint. nothing worked but now i can light with ease. i will never forget this solution, much love ❤❤❤
Dude you saved my life. Tried different fixes for hours and nothing worked. This really did the trick!
How many vids I watched of fools beating around the bush talking about everything but the point of the vid. Too many. Your the man and this helped me.
I think i see what was actually causing the problem, that spring is supposed to have a metal follower attached to it that actually pushes on the flint and it looks like yours is missing. Stretching it seems to have replaced the missing tension, replacing it with a new one should also fix the problem. I can still see this helping add tension though, i will remember it.
Kept overfilling my new Zippo because I couldn't figure out why it wouldn't work consistently. Did this and it fired right up. Appreciate the research!
After about 10 videos, I came across yours, and BAM, it worked! Thanks man, I really appreciate it!
Zippos are a timeless design. Lighting a smoke with one always gives me a good feeling
Ive been zippo collecting for the last few years. I have one thats a bugger always acting up rather its trouble lighting or rusting the flint wheel or going dry. I lost my good zippo so i grabbed this one to get me by until i find it. Filled it and noticed it didnt want to light good. Tried the spring trick and worked like a charm. Thanks a bunch 🙏.
Thank you brother, I have had the same issue with my 3 year old zippo now for almost a year and that fixed it. I was ready to trash it after replacing the flint, the cotton for the fluid, the wick, the fluid and the flint.
Tried everything until I saw your video. Thanks man , it works very well now.
Great video one goofy thing I did was stretched it too much first time. Just watch how in this video it’s only stretched couple of times so the length is not increased so much pushing it back becomes impossible. So I then destreteched it a little so the length was like in the video. Now it’s working like new.
FINALLY!!!! Someone trouble shooted vs tell us how to pour fluid, thread a wick through a hole and palce a flint in a tube and watch it make a flame…..Thank you beacuae all this time it was the spring that was weak causing a weak spark and need to be stretched. Fixed it perfectly as I was about to throw it in the garbage..
Such a simple fix and yet it's one I'd not thought of, little stretch of the spring instant flame genius 👍🔥
More friction...more spark, it makes sense to me! Thanks for the tip! Take care bro!
It was driving me crazy brother! Mystery solved 🔥🔥🔥
This did the trick for me. Thanks!
You are a genius sir!
THANK YOU finally something that works
I tried so many things, your solution finally fixed it thanks a lot!!
i cherish the zippo my cousin gave me and i even got one for my bro in law but honestly i prefer my imco junior 6600 from austria more reliable on the first if not second flick to light easy to carry and a conversation piece with its unique look and flick open lighting
Look at you, solving mysteries. I give you a👍🏻
Thanks! It was driving me crazy 🔥🔥🔥
Awesome fix - worked a treat! One thing I hadn't thought of - any thanks!
I just did this on my 98 zippo and it works great 😊 thanks
I've got to try this!
the bottom on the old ones has a bit of a recessed edge the new ones are flat , btw mine say xv so 15 i guess but what year would that be from if you know? my cousin gave it to me back in 2000 but i was used so i know he had it from the 90's
It’s a miracle- thanks..
my 1992 60th year zippo now works fine again. thx :)
Grnius. Thank you!!
I fucking love you dude, thank you so much!! I brought today 2 zippo lighters from a guy and one of them was working normaly and the other had this problem, and tried all the methods posible and nothing worked and I started feeling so bad because i thought i got scamed until i found your video and now i feel și much better, thank you once again for your video and God bless you!
I thought I was me overfilling ut or something thanks dude I was scared for my new zippo haha
Tnx! 😊
Zjppo has a lifetime warranty
I know you solved the mystery but did you reach out to zippo- just curious
I know, I hear the wait time is pretty long though. Heard a guy on CZcams sent in one run over by a truck, and they fixed it! 🔥🔥🔥
Thanks a lot, this also did the trick for me 🙂
Worked like a champ. Thank you
Thank you!! 🕺🕺🕺
This got me from not lighting, to lighting every 5 - 9 sparks but I think the flint wheel on mine must be faulty somehow
Helped a lot thanks!
king of kings 🙏
for some reason my zippo won't light when the zippo itself is cold
Me too
Hello!
Very cool thx, greetings from Austria ✌
Austria 👏👏👏 I'm watching your meerschaum video right now, I was wondering which country. Very nice meerschaum collection!
Dude, background music is too loud
Dude!! Thank you
Finally, thanks!
Hard to hear you over the background music.
Land the plane man
Me too
Fuccin genious
Now sparks good thanks mate
I don't see a spacer on your spring. That might be the problem!