Camera work is excellent! Very useful and professional delivery. This job is hard enough without having to worry about the production value, I for one appreciate all the hard work. Thank you.
Best camera work I've seen on any of the ball joint videos nice work. Takes a lot of mussel, patience, time and ingenuity if you don't own two thousand plus dollars in shop tools...worked out nicely.
Excellent job! Realistic! These things are very stubborn to remove. I'll be dong the same thing soon. This video is excellent advice. Thank you. I would have replaced that upper control arm too but you can do that later on, not having to disassemble everything one more time.
Awesome video, very informative. Redoing the front end on my 03 1500 ST rwd and your video covers everything anyone could need to know. THANK YOU SIR :)
You can press the lower ball joint out with the exact press from autozone he has without using a file and if yours is stuck one won’t pop out and you tried everything grab a sawzall you can come in from the front there’s a big wide hole like 2 inches tall by 5 inches wide you have a clear shot with a sawzall to cut the middle of the lower ball joint in half so the knuckle drops with the lower portion of the ball joint in it and the top stays in the lower control arm then use the press to press both half’s out very easily
Wonderful video that will help when I do this but why didn't you replace the upper ball joints while you were already in there?? Not only that but replace the wheel bearings at that time too
Camera work is excellent! Very useful and professional delivery. This job is hard enough without having to worry about the production value, I for one appreciate all the hard work. Thank you.
Best camera work I've seen on any of the ball joint videos nice work. Takes a lot of mussel, patience, time and ingenuity if you don't own two thousand plus dollars in shop tools...worked out nicely.
Excellent job! Realistic! These things are very stubborn to remove. I'll be dong the same thing soon. This video is excellent advice. Thank you. I would have replaced that upper control arm too but you can do that later on, not having to disassemble everything one more time.
Awesome video, very informative. Redoing the front end on my 03 1500 ST rwd and your video covers everything anyone could need to know. THANK YOU SIR :)
Thanks for your help….
Thanks for your help brother nice video
Nice video helped out a lot 👍
Great video, thanks for the informative video.
Good job but that upper control arm, also needs replacing.
Good job, great video. 👍
excellent video !!!!!!!!
Great job showing and telling, keep up the good work see ya next time see ya bye.
Very good job
Very cool dude 👍
That Upper Arm should be replaced. The ball joint is completely destroyed.
You can press the lower ball joint out with the exact press from autozone he has without using a file and if yours is stuck one won’t pop out and you tried everything grab a sawzall you can come in from the front there’s a big wide hole like 2 inches tall by 5 inches wide you have a clear shot with a sawzall to cut the middle of the lower ball joint in half so the knuckle drops with the lower portion of the ball joint in it and the top stays in the lower control arm then use the press to press both half’s out very easily
Excelente, excelente, excelente ,
Wonderful video that will help when I do this but why didn't you replace the upper ball joints while you were already in there?? Not only that but replace the wheel bearings at that time too
👀👍🏻nice!
Thanks for the very informative video. I'm planning on replacing mine this weekend. Is this a 4x4 by chance? Mines an '02 1500 4x4 5.9L