What settings were you at on the welder? Currently have an FC90 and trying to find the smallest welder that can run the welder. Can you run the FC90 at max settings with this generator? Thanks!
Good vid. I just bought an FC-90 to repair some hand rails. I've been using my Lincoln 140C and my Champion 3500watt inverter gen. The Lincoln weighs too much to carry around so that's where the FC-90 comes in. Given ur Onan 2500i can handle the FC-90 I'm sure it work fine with my gen. Have u found that the FC-90 can weld 18ga without blowing holes through It?
The Cummins Onan suitcase inverter generator is the strongest the most amps on the market right now. be careful with the inverter style generators running heat appliances. I've already burned up one and they replaced it it was a 2200 watt dual fuel Inverter suitcase style generator. the yellow overload light just kept coming on and it wouldn't make power while the engine was still running. And I thought the circuit breaker would keep anything from burning up obviously it doesn't on these inverter generators. I was only running a 1.5 amp fan and an electric blanket 144 Watts which is around 1.5 amps also in the winter time around 8 to 9 hours a day for six months. I run it to stay warm on the lowest heat setting on the electric blanket and the inverter 2200 watt generator died. The inverter generator that died was only run on propane never gasoline. On another note My old faithful dependable Coleman 1850 hand portable indestructible generator for over 25 years old will run most anything I need. On gasoline it wouldn't run for 8 through 9 hours overnight on gasoline. But it's not as strong as the Cummins Onan 2600 or the other 2200 watt dual fuel Honda I have now but the weakness of the inverter generators are these inverter boards that burn up from overloading. That is what they told me after I burned up my 2200 watt suitcase portable 80cc Chinese generator. Good luck
Very nice welding skills.
Clear safety glasses under your hood when welding. I learned the hard way.
What settings were you at on the welder? Currently have an FC90 and trying to find the smallest welder that can run the welder. Can you run the FC90 at max settings with this generator? Thanks!
Good vid. I just bought an FC-90 to repair some hand rails. I've been using my Lincoln 140C and my Champion 3500watt inverter gen. The Lincoln weighs too much to carry around so that's where the FC-90 comes in. Given ur Onan 2500i can handle the FC-90 I'm sure it work fine with my gen. Have u found that the FC-90 can weld 18ga without blowing holes through It?
The Cummins Onan suitcase inverter generator is the strongest the most amps on the market right now. be careful with the inverter style generators running heat appliances. I've already burned up one and they replaced it it was a 2200 watt dual fuel Inverter suitcase style generator. the yellow overload light just kept coming on and it wouldn't make power while the engine was still running. And I thought the circuit breaker would keep anything from burning up obviously it doesn't on these inverter generators. I was only running a 1.5 amp fan and an electric blanket 144 Watts which is around 1.5 amps also in the winter time around 8 to 9 hours a day for six months. I run it to stay warm on the lowest heat setting on the electric blanket and the inverter 2200 watt generator died. The inverter generator that died was only run on propane never gasoline. On another note My old faithful dependable Coleman 1850 hand portable indestructible generator for over 25 years old will run most anything I need. On gasoline it wouldn't run for 8 through 9 hours overnight on gasoline. But it's not as strong as the Cummins Onan 2600 or the other 2200 watt dual fuel Honda I have now but the weakness of the inverter generators are these inverter boards that burn up from overloading. That is what they told me after I burned up my 2200 watt suitcase portable 80cc Chinese generator. Good luck