So is the secret ingredient a little courage and humility? Not many guys would want to make their first welding attempt public. Thanks for showing us how it is done.
I’ve been watching videos as I’ve recently brought a welder similar to yours. They’d say with flux coated wire you need to reverse the polarity of the machines to stop all the splatter. I’m not sure if yours is set up that way but worth a check and test
In my 20’s I was a welder for a few years learned in shop class in high school, now in my late 60’s with more time than $$ I bought the cheapest Harbor Freight flux core welder $150.00 replaced my floor pans in my truck and having fun with it. And now my neighbor is tapping me on the shoulder 😂always a pleasure to watch Dave ☮️
I've got a cheapo flux cored welder but I picked a really good auto darkening helmet at a flea market new battery and outer cover I was in business! Welding opens a whole world of opportunity!
I've the exact welder you have, as a certified welder...20 yrs ago when I was building garbage truck bodies...pour the coals to it with this welder, heat setting on a higher setting, dial in wire speed. If ya blow thru, move wand quicker, or dial heat down a notch or two. Also, you don't drag the bead, you push it. So, when welding right handed, you weld right to left pushing the bead along as you go holding wand at angle ///// like this but more like a 45 degree to the work. That keeps the heat in the steel. I've welded a bunch with mine, for the price, it welds beautifully once correct settings, remember, amps are your friend when welding. Penetration is key to a weld.
I'm a complete novice. I bought one of these to do simple welds. With flux core wire, I was always told by people way smarter than me that "if there's slag, you drag." Is that not correct?
I learned in high school as well and I have worked with Boilermakers millwrights and pipefitters and im a union operator for 20 years. And I have always been taught and heard from some of the best welders in the country that our union has to offer. If it makes slag you drag you don't push. That's a new one on me. I will have to try that one. If it works goes to show you you never too old to learn something new. And I'm almost 60 years old. Lol
Hmm, learned something new, I'm so used to MIG as I've always pushed, habit I guess. Never really used flux core until this welder, all I've known was MIG steel/alum. Have to try it out next time I gotta weld something.@@zrxdoug
There’s a phenomenon on CZcams, where you’ll have a very specific question about a car from the 80’s, or how to tie a bow tie, and the perfect teacher will present themselves at the click of a button. This is the first time I’ve been able to see the opposite end of the equation of a non relevant question being answered to such depth, great video!
50-something here. I am taking a welding class at the local community college. I love that we get 3 hours a week hands on plus an hour of lecture. We also will work thru all the major welding types - stick, MIG, flux core… just a good way to dabble on the cheap
55 year old here, LOTS of soldering experience, zero welding, but it sounds like I'll pick it up fairly quickly with my soldering experience. I wish you the best results !
@@michaelb.42112 - you young guys make me laugh... I turned 80 last month and am about to buy my first welder. I did oxy/acetylene in college but that was 60 years ago so I'm starting from scratch - as well. Good luck all.
Helpful hint: crank the amperage up until it's possible to blow through ... say at about the 3 second spot if you held it in the same place.... now you'll have enough heat to keep moving the "puddle" from the puddle forward into the "needs to be welded" section in those circles, with your hands locked in somehow ... ya know... same as the guitar .... ya gotta be locked in then proceed..... lastly ... since you can blow through in 3 seconds.. the key to weld strength is penetration .... between 2/3 and 5/8 of the way through the material you're working with is about perfect... not too deep for blowing through but deep enough that the weld will actually do it's job. I'm sure you've figured out the feed speed so it's working for you.... Thanks Mr. Dave once again for the share sir !
I can't tell you how refreshing it is to watch a video like this. I too bought that welder and my welds looked like yours. I also practiced a lot and now they're looking better. Thanks for your transparency and humbleness, the world needs more of it.😊
So never welding before, I borrowed a buddy’s machine and with a bunch of donated steel shelving, I glued together my frame that supports my van build. What a feeling! I’m like a god! I can stick metal together! Now with confidence abound, I bought a production roof rack and cut it down to the size I needed and proceeded to glue it all back together. Three years later, everything is still intact and I couldn’t be happier. This video brings back great memories! Thanks Dave! Bryan from Vancouver
As the KING of boogerweld land, you sir, are better than I at welding on your first day. In all fairness I have attempted to weld a total of 5 times in my 53yrs on earth. A true welder told me it takes many hours of practicing and I'm never going to be good at it trying it once every 10 years. Love you channel, keep the content flowin...
My hats off to you! That is no doubt one of the most helpful how to videos I've ever seen on anything. What a breath of fresh air it is to have someone post a video from a complete novice point of view. I'm sure there are other videos on CZcams done this way, but I watch how to videos on a regular basis (daily) and do not recall seeing one produced by someone who has virtually no knowledge of the subject matter. I can't imagine a more helpful video when it comes to taking away someone's doubt or apprehension about learning a new skill. Nicely done!!
Dave I worked in a Foundry for a few years. And I learned how to TIG weld while I work there. I bought a MIG welder for the house just so I could weld a few things together. And I ended up welding my own bumper out of 316 plate with a small Lincoln hobby welder . My welds turned out very well my boss was very happy with my welding and he said that a hobby welder does a pretty good job just as well as a Industrial, as far as hobby welding goes. It's good for a quick fix when you need it
I bought one of those when they were first released, used it and abused it FOR YEARS until last month when it finally died after so many trips off-roading, and countless miles of wire run through it. I replaced it at opening the next morning. I've run that thing off of generators and solar inverters, and Blue Demon actually has a stainless wire that runs great in there if you need it. I've done as thick as 5/8" to 5/16" steel by just doing a couple extra passes. I LOVE that thing!!
I’ve got one just like it. I started building a rocket stove but was frustrated with my welds. You’ve inspired me to get my machine back out…thanks, Dave!
I love that welder. I bought the same one, built a time machine with it, traveled back to 2014, bought Bitcoin and came back. Now I'm a kabillionaire!!!! Thanks Harbor Freight!
Hi Dave, I bought one too a couple years ago. It took a bit but I got it figured out it's a good little welder. I have the same problems with the hood. I like you and Brooke's adventures. Thanks
I considered going to welding school , a guy on a forum said "you don't need that, for a fraction of that tuition you can buy a top of the line welder. Then practice with it, pass the basic test, and then get an apprenticeship." I dropped the project, because I have one bad eye that had cataract surgery , repetitive- strain neck pain, , and I do worry about breathing the fumes. I grew up in the 70's so I probably already have 3-4 lbs. of lead in my bones lol. I did watch Welding Tips and Tricks , as you probably have . That guy started a lot of carreers. Another great video Dave, thanks.
Hi Dave I am a welder for over thirty years and I say your on the right track try to always go from bottom to top when you draw down it gives you a nice weld but no penetration. so your bracket instead of welding on the down hill practice gup hill this way you get more penetration and a stronger weld. it takes a while to get it but when you do it is like riding a bicycle you never forget how to! Now your using what is known as a flux core welding wire if you get a solid wire and run a gas it costs more but gives a cleaner weld you can see this on line watch some videos to see the difference! You would probably enjoy the gas shield wire better but it costs more to run... Happy welding!!!
I bought the 170 to serve as my aluminum spool gun addition to my repair arcenal and it's been a good machine. It was interesting and frustrating at the same time watching the progression from way too fast, no puddle control to passable weld with apparently good tie-in on the edges of the weld bead. Nicely done...first-timer! Of course it helps that a guy named Dave Whipple has quite an extensive toolbox of skills already - a good starting point for someone new to the process!
I bought this welder, also with no experience, and built a large retaining wall, garden edging, and a sail shade pole with it! Fun learning curve, and satisfying to stick metal together!
I've owned mine for about 3 years. I never really welded prior to owning it. Since then I've built about 12 barbecue pits (1/8-3/8) thick metal and done sheet metal repair on my 1951 and 1947 Chevrolets. Also sheet metal repair on a few other classic car projects. The work has turned out really great and I'm enjoying doing it. All on a Harbor Freight budget. I really enjoy your videos and way of living.
One thing I’ve learned from welding is to torch the metal a little before you start a pass. It not only gets rid of moisture but also has heat in the metal so you don’t start a cold weld. A cold weld will start super narrow and be very weak until it starts to heat up to actually melt the filler wire and 2 pieces of metal together.
I love the coincidence that there was an ad for this very welder & it said basically everything you're saying! I know the ad was random but it was pretty cool to see it in action as you try it out! Hope you will continue to enjoy the use of it & will share your future projects!
I've been watching you for a long time now, since I lived back in Michigan. You inspired my wife and I to take the leap off grid and we bought land in the Rockies in northern New Mexico and we did it. Got some videos of the area up on our channel, just getting started, and it's breath taking here. Thanks for the inspiration man.
Dave, I've looked at this same welding machine for years but I know absolutely nothing about welding! However, I do have a strong interest in it! You've given me the courage to try it! Thanks for this video!
I bought my first Harbor Freight welder, heck it's still my first and only welder, a Dual Mig 171 and use it still. I need to do a HD video of it, last video was in 360 or 480p, before HD. But I've built a log splitter with it, repaired a Ford Ranger, boat trailers. I only started welding because I could afford to start welding.. so I don't forget that when I think about upgrading.
Literally last week I was looking at this welder and trying to convince myself that it would be a cheap way to learn basic welding. I plan to figure it out as I go, just like you did. Thanks for the video!
Thanks Dave!! When I worked in grad school- they had everything set up- all the gases- all the different types… soooo nice to see your video. Made my day!
Great video. This little unit is a MIG (metal inert gas ) welder. Mig welders are constant voltage power supplies, so you set the voltage and wire feed speed on the dials. The machine delivers the amperage needed to weld. Stick welders are MMA ( manual metal arc ) and are constant current power supplies where you set the amperage. On a slightly more expensive multi process welding machine there will be a switch to change between the two modes. With fluxcored wire the inert gas is generated as the flux inside the wire is heated.
I'm not an expert welder either but I know more than a beginner. One of the best U-tube welder channels to watch ( Welding Tips and Tricks ) ! Jody Collier is able to explain welder set-up and the welding processes in a way I could understand them and my welding has improved a bunch. I do flux core welding mostly and it is a DCEN ( Direct Current Electrode Negative ) process and you need to check and make sure your machine is set up correctly and that will help imensley . If your weld bead stands tall, your setting is too low on voltage and wire speed. If the bead is stands low ( concave ) settings are too high, lower the voltage and wire speed until the beed stands a little higher than flush with the metal you are welding. I hope this helps you !
Hood time, that's what it's all about. I learned on stick when I was 10 years old, so when we got our first MIG it almost felt like cheating! Fast forward almost 30 years and I've welded with nearly all processes available and gotten decent, somewhat good at them all...But, nothing satisfies me more than lighting up a 7018 rod with a fixed lens hood and just reverting back to the old ways... I've welded on many a railcar that is traveling all over this great USA and will always take pride in being able to make molten, liquid metal defy gravity. Love your perspective, keep up the good work!
How exciting!! I got my weld degree at 16. Have not used since. But I have 2 boys and dnl who weld on rail cars here in AR!! It’s a good trade in this day! I am proud they like what they do too
Yup, learning just like you. Nothing to do but to do it, right. Those charts give you a starting point, it's learning to analyze your weld and make the appropriate adjustments to those settings. also managing wire stick out, it's a balance of wire feed and how fast or slow your welding. Definitely a worthy skill to add to the tool box.
I’ve taken in person classes but I know how intimidating this can be - such a great video, approachable and useful as always. (Also much love for the t dub in the background!)
An old farmer was welding in his oily coveralls awhile back, a spark caused his clothing to catch fire, he went up like a tiki torch. Having the right clothing and equipment is more important than however much you paid for your welder.
Thanks Dave Whipple for “honest” trial, demonstration and test ( I love your admitting using the CZcams University). “Welding by smell” and two attempts of puddling and missing the joint and your helmet film removal = hularious! It has been GREAT catching up with Mick and Belle’s channels. Loved your window seat at the coffee shoppe! Love the WHIPPLES !
Great way to start Dave, I bought a craftsman flux welder 24 years ago and done a lot of home projects with, including floor pan replacement. Practiced for a while and became walk in the park. I’m not a professional welder by all means, but there’s a since of gratitude doing it myself. I noticed you were missing the shield, it will help keep the welds cleaner. Good luck!
Welding two lumps of metal together is I find, very therapeutic. I taught myself to arc weld 50 plus years ago through necessity, the welder guy who turned to weld together my new trailer frame was to drunk to stand up, so, I gave it a go myself. There sure wasn't any youtube videos to go watch back then, but after a few burnt through holes and half a dozen stuck rods I soon worked out how the power adjustment wheel influences the whole process. I still have, and regularly use the same trailer, it has never needed welding since, so I must have done it okay. I have a CO2 welder, which is okay on very lightweight metal, but if it is heavy duty stuff, I much prefer arc welding. I also taught myself do oxy-acetalyne welding too, on all sorts of metals from cast iron to lead. I think my next step now I have retired is TiG. Many thanks David in the UK.
I welded things for 10 years with 2 harbor freight welders. Chicago electric Flux machines, one 120v and the other 240 volt. I built a trailer and 2 garden tractor end loaders and countless other repairs and builds. I had about $400 in those welders and made/ saved tons of money building and repairing things for myself and others.
I bought my dad one of these exact welders to help him do a fairly big project and I was incredibly impressed with it. I had everything shipped to his house from Harbor Freight, helmet, wire, minor welding tools, exc. Everything worked well, to the point that I might get one for small projects around my house since it’s so much lighter than my heavy welders.
Practice, practice, practice. Really watching the puddle and slowing down are key to success. I like to do little “e” motions when I weld instead of circles but either works. Play with wire speed and amps too. You’ll get better!
Great video, Dave. Like you, I've never welded, but I was always fascinated by it. Now, you've given me a little confidence to give it a try. Thank you!!!
I’m 70 years old now and have always wanted to try welding. I’m retired from the electronics industry so I’ve had experience in all types of soldering over my career. Maybe I will try this cheaper approach to try welding. Thank you for this video.
I did ornamental iron works with a cousin. He never let me weld or even practice, but had an idea about it. Seeing you practice has given me the confidence to try it. Had some laughs and fun watching you. You did great! Thank you!
I'm a retired aircraft technician. The only welding training I've ever had was Oxyacetylene. All my tig/mig/arc has been self taught. I have this same HF welder great For small stuff. Bigger stuff I use a DC stick. It's a lot of fun teaching yourself, and taking pride in your weld quality. Have fun Dave. I do!
Good stuff. My dad taught me to weld like the old timers teach swimming. Gave me a box of welding rod and pointed to the pile of scrap metal and "threw me in". That was forty + years ago and my bird-poop welds are still sticking things together when I need them to.
great segment Dave. I've thought about getting a small welder but have absolutely no experience at it. was good to watch you start from zero and progress through passable, functional welds. thanks for sharing.
You seem to be learning quickly! I haven't welded since high school metal shop in 1979-80. I had a helluva time seeing through that helmet lens but i learned to flip the shield up just enough to see where I wanted to strike a bead and held the rod as close to the metal as I could without it arcing. I flipped the shield down and struck an arc and the light from the arc was enough to see the bead forming. It worked good enough and I was able to accomplish the 5 basic welds satisfactorily.
I want to tell you about a weld helmet that my dad had. We're talking 60 years ago, maybe 65 years ago. Yeah because I'm 75 now so I was about 10 years old. I would go out in the garage and get my dad's welding helmet and put it on my head and then go outside at the noonday sun and look at the sun and it looked like the moon.
Gonna have an eclipse here next week. Might have to go to Harbor Freight and get me one of them there “auto-adjustable” welding helmets. Then, after the eclipse is over and done, “well honey I got me this here welding helmet so I may as well go on back and pick me up that there Titanium Mig 125 welder that Dave Whipple says is Okey-Dokie!”
There's a certain rating it has to be to look at the sun - they're available but double check. Last thing you wanna be is blind, and an idiot. @@jonathonchalk6603
I am NOT a welder but I got one of these and with a lil help from a professional welder I was able to build a trailer using that lil welder. For the money its not bad. Awesome video, really enjoy your videos. Hoping one day I'll be able to find some land and live a more simple life.
I'm about to set up at home as a "welder" - I did oxy/acetylene in college, but that was 61 years ago...! I've also been watching the same YT videos but they don't show just how bad first attempts can be so... if my first attempts are as rubbish as yours i would otherwise have returned to cabinet-making. But to then see how much better you can be after an hour or two is so encouraging... As always - Thank you, thank you.
I had to LOL when you found the film on the lens. I can totally see myself doing that. I'm no welder either but it seems to me that you progressed quickly. Thanks for a great vid.
I've had a HF flux core welder for a couple years and never really used it because I didn't have a proper helmet- aka -couldn't see jack! I went a step below HF and found a basic helmet on Temu for $15. Haven't used it yet but serendipity sent your vid at just the right time. Thanks for the motivation!!
As a journeyman Pipefitter with access to fancy welders at work, a cheap fluxcore is a great tool to have at home, just used mine for an exsaust hanger on my old F-150
This was my first welder years ago, and I still keep it around for obvious reasons, even though I have several other Lincolns including an engine drive. This thing has a time and a place.
Hi Dave, I’m glad to see you!! Yep sticking metal together is definitely something a fella should be able to do! Every handy fella needs a mig welder! It sure is helpful to able to make what ya need out of strap laying around the ole homestead. I have found that clean metal is so much easier to weld, also make the temp a lil hotter than the chart says so you can dial it back. Always start on scrap the same thickness you want to weld. Go slow and practice. It’s really fun to be able make stuff that makes your life and the job easier. Thanks Dave God bless you and the family
Love this one! It's like watching myself my first time trying welding. Good on ya, my father welds for a living so I've seen it and heard it (the sound of what a good weld should sound like) my whole life, but never did it myself. And still did the same as you in my 40's when I finally bought a chineseium multiprocess welder from amazon to fix a disc harrow that broke on me last year. Took me a while to dial in my helmet to where I could see what I was doing too without being 1/2 scared that I'd go blind.
Hey Dave, you are a true life saver! I have been contemplating on buying this exact model from HF & was hoping someone would do a review on it. Now I feel confident that this welding machine will be a good starter for a Novice welder just like you. Thanks again & keep on putting out great videos as always. And stay “ Radical “ 😊
I can’t tell you how happy I am to see this. I bought the same welder and had the same dalmation splatter spots all over the first time. Bring a fan of yours it helps to know that I’m not the only one and just need to try again
I've been wanting to learn how to weld for years, but never gave it a try. I guess it's time to watch some welding videos and then visit Harbor Freight. Thanks for sharing.
I’ve been welding professionally for over 10 years and welding before that. I’ve had one of these for about 3 years they work. Worth the money to stick some stuff together and you can even get nice looking beads out of it beings how cheap it is. They work just fine keep up the videos man
Arkansas abounds in Tornado shelters ... they're everywhere. This new work should get really interesting in more ways than one! God Bless you all, Brother :)
love it! I picked up a cheap YesWelder 135 flux core unit off Amazon this year and I've done a couple of small DIY jobs - not the prettiest welds but they are functional and that's good enough for me!
I have one of these welders and also documented my first ever use of it on my channel. Since then I’ve used it a few times and I have gotten better at it, but still a far cry from even competent. I take the “if you can’t tie a not tie a lot” approach to welding and so far nothing I’ve welded has broken. The not being able to see part is for sure the hardest for me. Great video Dave really enjoyed it.
I appreciate this video. The only welding experience i have is the continuing education class that I took at my local vocational school. I think you did an excellent job with your review!
Love your honesty, dude. I'm also getting ready to start my first project. WAIT! Go find some junk to learn on. Thank you for reinforcing that concept. Wish me luck.
Nicely done!!! I bought one of those a few years ago for quick repair work on the farm, it will run off my generator and makes decent welds for field repair work.
I’m impressed! I started on my farm with stick welding with a Lincoln buzz box. Those wire welders r great for almost any small job! I hope they pay you for the video/ad
Nice job Dave. Inspired me to get a new helmet...says the plastic film😁 One request....MORE CONTENT. Always appreciate your subjects, the honest delivery, and the wholesome overall presentation! Blessings.
Hey Dave, you have to be the most honest person I have ever watched on such a project like welding LOL. You will become a natural because that is what you are a natural. 😉 Ontario, Canada
The definition of bravery is posting welds to the Internet. To post your FIRST welds on a popular YT channel is downright legendary.
I appreciate that
So is the secret ingredient a little courage and humility? Not many guys would want to make their first welding attempt public. Thanks for showing us how it is done.
I have been holding off trying this machine out because I wanted to catch that FIRST time experience. No excuses.
That helps with many things .
I’ve been watching videos as I’ve recently brought a welder similar to yours. They’d say with flux coated wire you need to reverse the polarity of the machines to stop all the splatter. I’m not sure if yours is set up that way but worth a check and test
Safety first too. You don’t want to go zapping yourself with that thing I’m sure.
#HumbleDave 🎉
Brother, I'll give you mad props!! I'm actually a welder/fabricator for 30 years and you'll never see my welds on CZcams, respect!
In my 20’s I was a welder for a few years learned in shop class in high school, now in my late 60’s with more time than $$ I bought the cheapest Harbor Freight flux core welder $150.00 replaced my floor pans in my truck and having fun with it. And now my neighbor is tapping me on the shoulder 😂always a pleasure to watch Dave ☮️
Don't forget the other thing you learn in high school something about gas and grass. Welding isn't free 😊
same here. I weld every 5 to 10 years and am glad i learned in highschool. Now my kid is so much better I leave it to him
I've got a cheapo flux cored welder but I picked a really good auto darkening helmet at a flea market new battery and outer cover I was in business! Welding opens a whole world of opportunity!
I've the exact welder you have, as a certified welder...20 yrs ago when I was building garbage truck bodies...pour the coals to it with this welder, heat setting on a higher setting, dial in wire speed. If ya blow thru, move wand quicker, or dial heat down a notch or two. Also, you don't drag the bead, you push it. So, when welding right handed, you weld right to left pushing the bead along as you go holding wand at angle ///// like this but more like a 45 degree to the work. That keeps the heat in the steel.
I've welded a bunch with mine, for the price, it welds beautifully once correct settings, remember, amps are your friend when welding. Penetration is key to a weld.
Sometimes you learn WAY more in the comments section than the video provides. Such is the case here.
I'm a complete novice. I bought one of these to do simple welds. With flux core wire, I was always told by people way smarter than me that "if there's slag, you drag." Is that not correct?
@@scttmtclf
No you got it right..pushing flux just contaminates the weld pool.
I learned in high school as well and I have worked with Boilermakers millwrights and pipefitters and im a union operator for 20 years. And I have always been taught and heard from some of the best welders in the country that our union has to offer. If it makes slag you drag you don't push. That's a new one on me. I will have to try that one. If it works goes to show you you never too old to learn something new. And I'm almost 60 years old. Lol
Hmm, learned something new, I'm so used to MIG as I've always pushed, habit I guess. Never really used flux core until this welder, all I've known was MIG steel/alum. Have to try it out next time I gotta weld something.@@zrxdoug
There’s a phenomenon on CZcams, where you’ll have a very specific question about a car from the 80’s, or how to tie a bow tie, and the perfect teacher will present themselves at the click of a button. This is the first time I’ve been able to see the opposite end of the equation of a non relevant question being answered to such depth, great video!
50-something here. I am taking a welding class at the local community college. I love that we get 3 hours a week hands on plus an hour of lecture. We also will work thru all the major welding types - stick, MIG, flux core… just a good way to dabble on the cheap
I’m 48 and have been planning on taking a similar class at the technical college near me.
@@markgallagher1376 I'm also 48
55 year old here, LOTS of soldering experience, zero welding, but it sounds like I'll pick it up fairly quickly with my soldering experience. I wish you the best results !
@@michaelb.42112 - you young guys make me laugh... I turned 80 last month and am about to buy my first welder. I did oxy/acetylene in college but that was 60 years ago so I'm starting from scratch - as well. Good luck all.
Helpful hint: crank the amperage up until it's possible to blow through ... say at about the 3 second spot if you held it in the same place.... now you'll have enough heat to keep moving the "puddle" from the puddle forward into the "needs to be welded" section in those circles, with your hands locked in somehow ... ya know... same as the guitar .... ya gotta be locked in then proceed..... lastly ... since you can blow through in 3 seconds.. the key to weld strength is penetration .... between 2/3 and 5/8 of the way through the material you're working with is about perfect... not too deep for blowing through but deep enough that the weld will actually do it's job.
I'm sure you've figured out the feed speed so it's working for you.... Thanks Mr. Dave once again for the share sir !
I can't tell you how refreshing it is to watch a video like this. I too bought that welder and my welds looked like yours. I also practiced a lot and now they're looking better. Thanks for your transparency and humbleness, the world needs more of it.😊
So never welding before, I borrowed a buddy’s machine and with a bunch of donated steel shelving, I glued together my frame that supports my van build.
What a feeling! I’m like a god! I can stick metal together!
Now with confidence abound, I bought a production roof rack and cut it down to the size I needed and proceeded to glue it all back together.
Three years later, everything is still intact and I couldn’t be happier. This video brings back great memories!
Thanks Dave!
Bryan from Vancouver
Good man
Dave I was always taught.."A grinder and paint makes me the welder I ain't.." You did good 👍.
As the KING of boogerweld land, you sir, are better than I at welding on your first day. In all fairness I have attempted to weld a total of 5 times in my 53yrs on earth. A true welder told me it takes many hours of practicing and I'm never going to be good at it trying it once every 10 years. Love you channel, keep the content flowin...
The best quote I've heard for when your welds aren’t pretty is; "a grinder and paint make me the welder I ain’t". Love the content!
Fantastic! This is how videos should be done! Simple, informative, great edits, no extra bla bla bla! Well done
My hats off to you! That is no doubt one of the most helpful how to videos I've ever seen on anything. What a breath of fresh air it is to have someone post a video from a complete novice point of view. I'm sure there are other videos on CZcams done this way, but I watch how to videos on a regular basis (daily) and do not recall seeing one produced by someone who has virtually no knowledge of the subject matter. I can't imagine a more helpful video when it comes to taking away someone's doubt or apprehension about learning a new skill. Nicely done!!
Dave I worked in a Foundry for a few years. And I learned how to TIG weld while I work there. I bought a MIG welder for the house just so I could weld a few things together. And I ended up welding my own bumper out of 316 plate with a small Lincoln hobby welder . My welds turned out very well my boss was very happy with my welding and he said that a hobby welder does a pretty good job just as well as a Industrial, as far as hobby welding goes. It's good for a quick fix when you need it
One of the things I greatly respect you for is you don’t claim to know it all
I like your disclaimer at the beginning. So open honest and up front. Hard to find that these days in between clickbait and bashers.
I bought one of those when they were first released, used it and abused it FOR YEARS until last month when it finally died after so many trips off-roading, and countless miles of wire run through it. I replaced it at opening the next morning. I've run that thing off of generators and solar inverters, and Blue Demon actually has a stainless wire that runs great in there if you need it. I've done as thick as 5/8" to 5/16" steel by just doing a couple extra passes. I LOVE that thing!!
I’ve got one just like it. I started building a rocket stove but was frustrated with my welds. You’ve inspired me to get my machine back out…thanks, Dave!
I took the plastic off... and THAT is why we love you!!!
I love that welder. I bought the same one, built a time machine with it, traveled back to 2014, bought Bitcoin and came back. Now I'm a kabillionaire!!!! Thanks Harbor Freight!
Can you send me plans for that time machine?
Hi Dave, I bought one too a couple years ago. It took a bit but I got it figured out it's a good little welder. I have the same problems with the hood. I like you and Brooke's adventures. Thanks
@@paulf1177 The equations are in Ronald Mallet's book!
@@paulf1177 the equations are in Ronald Mallet's book. Good luck!
I considered going to welding school , a guy on a forum said "you don't need that, for a fraction of that tuition you can buy a top of the line welder. Then practice with it, pass the basic test, and then get an apprenticeship." I dropped the project, because I have one bad eye that had cataract surgery , repetitive- strain neck pain, , and I do worry about breathing the fumes. I grew up in the 70's so I probably already have 3-4 lbs. of lead in my bones lol. I did watch Welding Tips and Tricks , as you probably have . That guy started a lot of carreers. Another great video Dave, thanks.
My Dad was a welder, I took an Adult Ed wielding class, and now you have temped me again with this video. I love welding. Thanks for the belly laugh.
Congrats on 50K RGL! You helped bring me back into the hobby after a 20 year hiatus, and also bring the youngsters in my family along for the ride.
Hi Dave I am a welder for over thirty years and I say your on the right track try to always go from bottom to top when you draw down it gives you a nice weld but no penetration. so your bracket instead of welding on the down hill practice gup hill this way you get more penetration and a stronger weld. it takes a while to get it but when you do it is like riding a bicycle you never forget how to! Now your using what is known as a flux core welding wire if you get a solid wire and run a gas it costs more but gives a cleaner weld you can see this on line watch some videos to see the difference! You would probably enjoy the gas shield wire better but it costs more to run... Happy welding!!!
So many people out here have used this video to get started and I want to say thank you!
I bought the 170 to serve as my aluminum spool gun addition to my repair arcenal and it's been a good machine. It was interesting and frustrating at the same time watching the progression from way too fast, no puddle control to passable weld with apparently good tie-in on the edges of the weld bead. Nicely done...first-timer! Of course it helps that a guy named Dave Whipple has quite an extensive toolbox of skills already - a good starting point for someone new to the process!
I bought this welder, also with no experience, and built a large retaining wall, garden edging, and a sail shade pole with it! Fun learning curve, and satisfying to stick metal together!
I've owned mine for about 3 years. I never really welded prior to owning it. Since then I've built about 12 barbecue pits (1/8-3/8) thick metal and done sheet metal repair on my 1951 and 1947 Chevrolets. Also sheet metal repair on a few other classic car projects. The work has turned out really great and I'm enjoying doing it. All on a Harbor Freight budget. I really enjoy your videos and way of living.
One thing I’ve learned from welding is to torch the metal a little before you start a pass. It not only gets rid of moisture but also has heat in the metal so you don’t start a cold weld. A cold weld will start super narrow and be very weak until it starts to heat up to actually melt the filler wire and 2 pieces of metal together.
I love the coincidence that there was an ad for this very welder & it said basically everything you're saying! I know the ad was random but it was pretty cool to see it in action as you try it out! Hope you will continue to enjoy the use of it & will share your future projects!
Thanks for showing this, Dave! I've wanted to see this done as long as I can remember. I'm chicken to try but you've given me a shot of courage.
I've been watching you for a long time now, since I lived back in Michigan. You inspired my wife and I to take the leap off grid and we bought land in the Rockies in northern New Mexico and we did it. Got some videos of the area up on our channel, just getting started, and it's breath taking here. Thanks for the inspiration man.
Dave, I've looked at this same welding machine for years but I know absolutely nothing about welding! However, I do have a strong interest in it! You've given me the courage to try it! Thanks for this video!
I bought my first Harbor Freight welder, heck it's still my first and only welder, a Dual Mig 171 and use it still. I need to do a HD video of it, last video was in 360 or 480p, before HD. But I've built a log splitter with it, repaired a Ford Ranger, boat trailers. I only started welding because I could afford to start welding.. so I don't forget that when I think about upgrading.
Your videos are always so relaxing to watch , I just wish they went for longer , good job Dave
Literally last week I was looking at this welder and trying to convince myself that it would be a cheap way to learn basic welding. I plan to figure it out as I go, just like you did. Thanks for the video!
Thanks Dave!! When I worked in grad school- they had everything set up- all the gases- all the different types… soooo nice to see your video. Made my day!
Great job there Dave, never stop learning and trying new skills! Thanks for sharing.
Great video. This little unit is a MIG (metal inert gas ) welder. Mig welders are constant voltage power supplies, so you set the voltage and wire feed speed on the dials. The machine delivers the amperage needed to weld. Stick welders are MMA ( manual metal arc ) and are constant current power supplies where you set the amperage. On a slightly more expensive multi process welding machine there will be a switch to change between the two modes. With fluxcored wire the inert gas is generated as the flux inside the wire is heated.
I actually want to do some of my own fabrication work and this gave me the warm fuzzies. Thanks, Dave!
I'm not an expert welder either but I know more than a beginner. One of the best U-tube welder channels to watch ( Welding Tips and Tricks ) ! Jody Collier is able to explain welder set-up and the welding processes in a way I could understand them and my welding has improved a bunch. I do flux core welding mostly and it is a DCEN ( Direct Current Electrode Negative ) process and you need to check and make sure your machine is set up correctly and that will help imensley . If your weld bead stands tall, your setting is too low on voltage and wire speed. If the bead is stands low ( concave ) settings are too high, lower the voltage and wire speed until the beed stands a little higher than flush with the metal you are welding. I hope this helps you !
If I'm not mistaken, this machine is strictly AC, so polarity is kinda moot.
Hood time, that's what it's all about. I learned on stick when I was 10 years old, so when we got our first MIG it almost felt like cheating! Fast forward almost 30 years and I've welded with nearly all processes available and gotten decent, somewhat good at them all...But, nothing satisfies me more than lighting up a 7018 rod with a fixed lens hood and just reverting back to the old ways... I've welded on many a railcar that is traveling all over this great USA and will always take pride in being able to make molten, liquid metal defy gravity. Love your perspective, keep up the good work!
How exciting!! I got my weld degree at 16. Have not used since. But I have 2 boys and dnl who weld on rail cars here in AR!! It’s a good trade in this day! I am proud they like what they do too
Yup, learning just like you. Nothing to do but to do it, right. Those charts give you a starting point, it's learning to analyze your weld and make the appropriate adjustments to those settings. also managing wire stick out, it's a balance of wire feed and how fast or slow your welding. Definitely a worthy skill to add to the tool box.
I’ve taken in person classes but I know how intimidating this can be - such a great video, approachable and useful as always. (Also much love for the t dub in the background!)
I was just lookin at this the other day.... Dave, you know just what content everyone wants to see.
An old farmer was welding in his oily coveralls awhile back, a spark caused his clothing to catch fire, he went up like a tiki torch. Having the right clothing and equipment is more important than however much you paid for your welder.
Thanks Dave Whipple for “honest” trial, demonstration and test ( I love your admitting using the CZcams University). “Welding by smell” and two attempts of puddling and missing the joint and your helmet film removal = hularious! It has been GREAT catching up with Mick and Belle’s channels. Loved your window seat at the coffee shoppe! Love the WHIPPLES !
Great way to start Dave, I bought a craftsman flux welder 24 years ago and done a lot of home projects with, including floor pan replacement. Practiced for a while and became walk in the park. I’m not a professional welder by all means, but there’s a since of gratitude doing it myself.
I noticed you were missing the shield, it will help keep the welds cleaner. Good luck!
Welding two lumps of metal together is I find, very therapeutic. I taught myself to arc weld 50 plus years ago through necessity, the welder guy who turned to weld together my new trailer frame was to drunk to stand up, so, I gave it a go myself. There sure wasn't any youtube videos to go watch back then, but after a few burnt through holes and half a dozen stuck rods I soon worked out how the power adjustment wheel influences the whole process. I still have, and regularly use the same trailer, it has never needed welding since, so I must have done it okay.
I have a CO2 welder, which is okay on very lightweight metal, but if it is heavy duty stuff, I much prefer arc welding. I also taught myself do oxy-acetalyne welding too, on all sorts of metals from cast iron to lead.
I think my next step now I have retired is TiG.
Many thanks
David in the UK.
Thanks for the video! You've inspired me to try my luck at welding. I've been wanting to do some welding for 20 years.
I welded things for 10 years with 2 harbor freight welders. Chicago electric Flux machines, one 120v and the other 240 volt. I built a trailer and 2 garden tractor end loaders and countless other repairs and builds. I had about $400 in those welders and made/ saved tons of money building and repairing things for myself and others.
I bought my dad one of these exact welders to help him do a fairly big project and I was incredibly impressed with it. I had everything shipped to his house from Harbor Freight, helmet, wire, minor welding tools, exc. Everything worked well, to the point that I might get one for small projects around my house since it’s so much lighter than my heavy welders.
Practice, practice, practice. Really watching the puddle and slowing down are key to success. I like to do little “e” motions when I weld instead of circles but either works. Play with wire speed and amps too. You’ll get better!
Great video, Dave. Like you, I've never welded, but I was always fascinated by it. Now, you've given me a little confidence to give it a try. Thank you!!!
I’m 70 years old now and have always wanted to try welding. I’m retired from the electronics industry so I’ve had experience in all types of soldering over my career. Maybe I will try this cheaper approach to try welding. Thank you for this video.
I did ornamental iron works with a cousin. He never let me weld or even practice, but had an idea about it. Seeing you practice has given me the confidence to try it. Had some laughs and fun watching you. You did great! Thank you!
I’m actually waiting for it to go on sale. Did some torch work years ago and did stick welding in school 20 years ago. Thanks for the honest review
I'm a retired aircraft technician. The only welding training I've ever had was Oxyacetylene. All my tig/mig/arc has been self taught. I have this same HF welder great For small stuff. Bigger stuff I use a DC stick. It's a lot of fun teaching yourself, and taking pride in your weld quality. Have fun Dave. I do!
Good stuff. My dad taught me to weld like the old timers teach swimming. Gave me a box of welding rod and pointed to the pile of scrap metal and "threw me in". That was forty + years ago and my bird-poop welds are still sticking things together when I need them to.
great segment Dave. I've thought about getting a small welder but have absolutely no experience at it. was good to watch you start from zero and progress through passable, functional welds. thanks for sharing.
You seem to be learning quickly!
I haven't welded since high school metal shop in 1979-80. I had a helluva time seeing through that helmet lens but i learned to flip the shield up just enough to see where I wanted to strike a bead and held the rod as close to the metal as I could without it arcing. I flipped the shield down and struck an arc and the light from the arc was enough to see the bead forming. It worked good enough and I was able to accomplish the 5 basic welds satisfactorily.
I want to tell you about a weld helmet that my dad had. We're talking 60 years ago, maybe 65 years ago. Yeah because I'm 75 now so I was about 10 years old. I would go out in the garage and get my dad's welding helmet and put it on my head and then go outside at the noonday sun and look at the sun and it looked like the moon.
Haha, I’m 62 and did the same thing with my dad’s helmet 😳
We used a welding mask to look at an eclipse when i was younger. I wonder if that is why I developed cataracts LOL
Gonna have an eclipse here next week. Might have to go to Harbor Freight and get me one of them there “auto-adjustable” welding helmets. Then, after the eclipse is over and done, “well honey I got me this here welding helmet so I may as well go on back and pick me up that there Titanium Mig 125 welder that Dave Whipple says is Okey-Dokie!”
That's what we watched the total eclipse of the sun with whenever it happens!!
There's a certain rating it has to be to look at the sun - they're available but double check. Last thing you wanna be is blind, and an idiot. @@jonathonchalk6603
I am NOT a welder but I got one of these and with a lil help from a professional welder I was able to build a trailer using that lil welder. For the money its not bad. Awesome video, really enjoy your videos. Hoping one day I'll be able to find some land and live a more simple life.
I'm about to set up at home as a "welder" - I did oxy/acetylene in college, but that was 61 years ago...!
I've also been watching the same YT videos but they don't show just how bad first attempts can be so... if my first attempts are as rubbish as yours i would otherwise have returned to cabinet-making. But to then see how much better you can be after an hour or two is so encouraging...
As always - Thank you, thank you.
I had to LOL when you found the film on the lens. I can totally see myself doing that. I'm no welder either but it seems to me that you progressed quickly.
Thanks for a great vid.
I've had a HF flux core welder for a couple years and never really used it because I didn't have a proper helmet- aka -couldn't see jack! I went a step below HF and found a basic helmet on Temu for $15. Haven't used it yet but serendipity sent your vid at just the right time. Thanks for the motivation!!
As a journeyman Pipefitter with access to fancy welders at work, a cheap fluxcore is a great tool to have at home, just used mine for an exsaust hanger on my old F-150
This was my first welder years ago, and I still keep it around for obvious reasons, even though I have several other Lincolns including an engine drive. This thing has a time and a place.
Hi Dave, I’m glad to see you!! Yep sticking metal together is definitely something a fella should be able to do! Every handy fella needs a mig welder! It sure is helpful to able to make what ya need out of strap laying around the ole homestead. I have found that clean metal is so much easier to weld, also make the temp a lil hotter than the chart says so you can dial it back. Always start on scrap the same thickness you want to weld. Go slow and practice. It’s really fun to be able make stuff that makes your life and the job easier. Thanks Dave God bless you and the family
Love this one! It's like watching myself my first time trying welding. Good on ya, my father welds for a living so I've seen it and heard it (the sound of what a good weld should sound like) my whole life, but never did it myself. And still did the same as you in my 40's when I finally bought a chineseium multiprocess welder from amazon to fix a disc harrow that broke on me last year. Took me a while to dial in my helmet to where I could see what I was doing too without being 1/2 scared that I'd go blind.
Loved the video! I’ve been looking to get the titanium. Thanks for the tips on how to get started using it.
Hey Dave, you are a true life saver! I have been contemplating on buying this exact model from HF & was hoping someone would do a review on it. Now I feel confident that this welding machine will be a good starter for a Novice welder just like you. Thanks again & keep on putting out great videos as always. And stay “ Radical “ 😊
I can’t tell you how happy I am to see this. I bought the same welder and had the same dalmation splatter spots all over the first time. Bring a fan of yours it helps to know that I’m not the only one and just need to try again
I’ve had their Vulcan 215 mig for about eight years. Paid $400 for it right when they introduced them. It has been a great welder, never had an issue.
I've been wanting to learn how to weld for years, but never gave it a try. I guess it's time to watch some welding videos and then visit Harbor Freight. Thanks for sharing.
I’ve been welding professionally for over 10 years and welding before that. I’ve had one of these for about 3 years they work. Worth the money to stick some stuff together and you can even get nice looking beads out of it beings how cheap it is. They work just fine keep up the videos man
Good solid video!
You instill confidence in all of us. Thanks Dave!
I have bought a Lincoln machine last year, and like you learn from video and some friend, what a blast, just love welding ;)
Arkansas abounds in Tornado shelters ... they're everywhere. This new work should get really interesting in more ways than one! God Bless you all, Brother :)
Learned in high school and weld every 5 - 10 years. Love it, i'm as good as you are. And proud
Glad to see you active again and how you can do so much with simple tools. And you have a great way of explaining
I appreciate that!
love it! I picked up a cheap YesWelder 135 flux core unit off Amazon this year and I've done a couple of small DIY jobs - not the prettiest welds but they are functional and that's good enough for me!
I have one of these welders and also documented my first ever use of it on my channel. Since then I’ve used it a few times and I have gotten better at it, but still a far cry from even competent. I take the “if you can’t tie a not tie a lot” approach to welding and so far nothing I’ve welded has broken. The not being able to see part is for sure the hardest for me. Great video Dave really enjoyed it.
I’ve been welding for decades! Practice is all you need Dave ! Just wait when you start welding overhead! Great job for a novice!!!! 😁👍
I appreciate this video. The only welding experience i have is the continuing education class that I took at my local vocational school. I think you did an excellent job with your review!
I've got one too and it works just fine for household repairs and light to medium fabrications.
Miller Welders have a great app with heat settings, metal thickness and it is very helpful.
I’ve NEVER had a desire to weld ANYTHING…until today! Thank you, Dave! :-)
i recently saw that unit at HF and was tempted. now i just might get it. great “first-timer” videO! THANKS.
So cool! I've only used a solder iron for making stained glass pieces but maybe this could be a fun try! Great job! Fun to watch your progression!
Love your honesty, dude. I'm also getting ready to start my first project. WAIT! Go find some junk to learn on. Thank you for reinforcing that concept. Wish me luck.
That’s some pretty good work on improving from beginning to end for someone who just started!
Nicely done!!! I bought one of those a few years ago for quick repair work on the farm, it will run off my generator and makes decent welds for field repair work.
Excellent video and review! Great job! You’re a great teacher!
I’m impressed! I started on my farm with stick welding with a Lincoln buzz box. Those wire welders r great for almost any small job! I hope they pay you for the video/ad
Nice job Dave. Inspired me to get a new helmet...says the plastic film😁 One request....MORE CONTENT. Always appreciate your subjects, the honest delivery, and the wholesome overall presentation! Blessings.
Hey Dave, you have to be the most honest person I have ever watched on such a project like welding LOL. You will become a natural because that is what you are a natural. 😉 Ontario, Canada
Great progress Dave, I learned on a miller matic, wish I could afford one of them. Thanks for the review, I can manage that model