Danny, your the man. Daily driver or not it nice to clean up the underside and paint it up. Gives it protection and also the Moser looks great in there with the underside cleaned up. Nice to see you masked up the body mounts as well. Great bunch of people. Great video.
My first comment on this build!!😎 Like I've told Liv a few times, an A-body build is an excellent way to go 'cos the basic platform is so good. Even a radical custom job like yours should be pretty stress-free if you take the time to do it right {which you are}. The Chevelle is going to be 100% bitchin' when it's done, if the work already accomplished is any indication. It ought to wow the crowd if you decide to run Drag Week, or Power Tour. Daniel-san, another way-cool thing about your project is that it loosely ties in with one of my own "bucket list" rides - a 1974 AWD Chevelle wagon. Don't know if it'll ever happen, but my preliminary research has been very interesting, indeed. If you're familiar with Motor Trend's Hot Rod Garage "Crown Hick" build - where they took a 60's-era F100 truck body, and plopped it down on a mid-90's Police-package Crown Victoria frame and drivetrain - my idea is along those lines. A '74 Chevelle wagon has a 116" wheelbase, as does a 2009 Trailblazer SS. Aside from fabricating new body mounts, it's pretty much plug-n-play. I'd even be able to use about 75% of the interior, too!! Again, don't know if it'll ever happen, but I'll be ready if I get the opportunity. KUTGW, my good man. Looking forward to the next chpter!!
FANTASTIC JOB GUYS, DANNY I DO THE SAME THING, CLEAN UP EVERYTHING AND PAINT IT, NOTHING WRONG WITH THAT..PREVENTIVE MAINTENANCE... THAT ASS END LOOKS GREAT... CANT WAIT FOR THE NEXT VIDEO.. ALL OF YOU, TAKE CARE
looks great, i remember cleaning up the underside with hot soapy water and red scotch brite, then rinse it was a mess though. dont understand why awd. moser upper mounts look taller
Do you have a roll around table? If so you could add some supports, one on each side, tall enough to support a rear end. You lift the car up, roll the table underneath, lower the car til the rear of end sets on the supports and undo the hardware so the rear end is free of the car. Lift car up, roll the table out from under the car. To install just reverse the process.
Im with you. I dont care for the hydraulic thing either. Even tho my 95 Impala/ B4U is dropped 2 inches. Not a lowrider by any means. I was wondering if I was ever going to see a love spat between Dan & Andrew.. Ha Ha The Moser Rear looks so good in the car and the Speedway gray paint makes it really pop. Thanks for the updates & Regards from Ody Slim
Please dont think Im being a dick. I wonder if the front end diff will be able to handle the horsepower. Im shure you have already thought this out but Im just wondering.
We will soon. The original engine didn't follow through 🤥 that put is 6 months behind. Now the new engine builder is supposed to have it to us in a couple of weeks. Trust us are little frustrated
There is already a awd 80s cutlass Rob Dahm has a awd rx7 Some guy in Florida did a awd 240sx We live in a world fake breasts fake butts and gender reassignment surgery A awd converted chevelle wouldn’t be a waste of time
Gnarly Speed Shop - WE HAVE THE MEATS! 😆
I have never seen a person that has more passion for cars as Olivia.. Please dont kick the 12 bolt around.. Ha Ha
I'm still waiting to see more on the 67 Chevelle!..
Nice work 👍🏻👍🏻👍🏻 can't wait to see the front drive in place 👍🏻👍🏻👍🏻😎
Danny, your the man. Daily driver or not it nice to clean up the underside and paint it up. Gives it protection and also the Moser looks great in there with the underside cleaned up. Nice to see you masked up the body mounts as well. Great bunch of people. Great video.
What a difference a day makes! The 12 bolt looks WICKED! I can't wait to see the front suspension in the car.
Got the same joy watching yours come together as I did the day I bolted all the parts to my own !! You guys are doing Awesome !! 🤘🏻😎🤘🏻
Great job, rear looks awesome !!!
I love the sunlight holes/trunk drains so you can see the rear end when the trunk is open!
YALL DID GREAT WORK AND LOOKS NICE.
Heel yeah! Nice job guys and gals. Love the goodentighten touch too.
Good stuff!! Thanks for videoing and sharing with us!
You guys should paint the Chevelle like Smokies infamous Black and Gold No 13, most badass Chevelle that Never Got Raced...
Danny the rear looks great I love the way it comes complete good luck with it enjoy
Great job guys and gals 👍 from Alabama 🇺🇸👍
Great video, guys!
Looking forward to future updates!
Would love to make my GMC Sprint an AWD someday.
Looks😎 really cool. Cant wait.
You know when she said it was auuuu suuuuum? She was right. Beauteous!
Danny it's guna be ready cool Chevelle can't wait to see it when your done you will have one of a kind ok you all keep killing it ❤
LIV come to the LOWRIDER side we need you lol
My first comment on this build!!😎 Like I've told Liv a few times, an A-body build is an excellent way to go 'cos the basic platform is so good. Even a radical custom job like yours should be pretty stress-free if you take the time to do it right {which you are}. The Chevelle is going to be 100% bitchin' when it's done, if the work already accomplished is any indication. It ought to wow the crowd if you decide to run Drag Week, or Power Tour.
Daniel-san, another way-cool thing about your project is that it loosely ties in with one of my own "bucket list" rides - a 1974 AWD Chevelle wagon. Don't know if it'll ever happen, but my preliminary research has been very interesting, indeed. If you're familiar with Motor Trend's Hot Rod Garage "Crown Hick" build - where they took a 60's-era F100 truck body, and plopped it down on a mid-90's Police-package Crown Victoria frame and drivetrain - my idea is along those lines. A '74 Chevelle wagon has a 116" wheelbase, as does a 2009 Trailblazer SS. Aside from fabricating new body mounts, it's pretty much plug-n-play. I'd even be able to use about 75% of the interior, too!! Again, don't know if it'll ever happen, but I'll be ready if I get the opportunity.
KUTGW, my good man. Looking forward to the next chpter!!
You can buy triggers for spray cans which makes them way easier to use..in Canada, I'm not sure about California...probably
Nice job, it looks like a very stout rear end to do the job 😊
Looks great guys
That is a gnarly rear end! Where's the beef? Lol
Don't forget the juice ! 😮
You can find that 3 wheel motion action in Oxnard. 💯
3 wheelin is a blast for sure
Perfection!
FANTASTIC JOB GUYS, DANNY I DO THE SAME THING, CLEAN UP EVERYTHING AND PAINT IT, NOTHING WRONG WITH THAT..PREVENTIVE MAINTENANCE... THAT ASS END LOOKS GREAT... CANT WAIT FOR THE NEXT VIDEO.. ALL OF YOU, TAKE CARE
looks great, i remember cleaning up the underside with hot soapy water and red scotch brite, then rinse it was a mess though. dont understand why awd. moser upper mounts look taller
Do you have a roll around table? If so you could add some supports, one on each side, tall enough to support a rear end.
You lift the car up, roll the table underneath, lower the car til the rear of end sets on the supports and undo the hardware so the rear end is free of the car. Lift car up, roll the table out from under the car. To install just reverse the process.
Put the 12 bolt from the chevelle into the pontiac! Take the spool out of course but it's a free upgrade to the poncho!
that is such an awesome looking rear end, everybody will want to crawl underneath the car at car shows and check it out
More of the front drive setup.
Looking cool
Thanks Ben!
Where were the Chicks Like Liv 40 years ago I Just Love Her enthusiasm on the smallest of things Great Video Kid's keep um coming
Im with you. I dont care for the hydraulic thing either. Even tho my 95 Impala/ B4U is dropped 2 inches. Not a lowrider by
any means. I was wondering if I was ever going to see a love spat between Dan & Andrew.. Ha Ha The Moser Rear looks so
good in the car and the Speedway gray paint makes it really pop. Thanks for the updates & Regards from Ody Slim
Nice rearend
Confict and Comedy make an awesome video!
Sweet ,, I like it
I think you could have marked the drive shaft and turn the tires and figure out the ratio
The rear end solid af but The aluminum front center sections aren’t too strong 😆
impressive
There is no “H” in MOSER!!!! Please pronounce it properly kids!!!😊Love this channel 👍
Nas-t-elle.. (Nasty girl).. Any thoughts on a panhard bar.. MaxMotorsports.. Made my mustang like a gocart.
I would give you my pinky, for that old 12 bolt, 😅😅
For Faster gear changes and weight a winter's quick change rear end is better and a dog box
One of One wtg on the build so way cool
How much for the rear end that came out of the chevelle?
👍👍😎
Too Cool Rear.
450 spring weight in the back or 150?
what is the price on all the cars for sale and how do we contact there is no phone attached anywhere.
✌👍
Do u want to Sell the 12 Bolt rear end out of the 67 Chevelle.if so let me know please..
Please dont think Im being a dick. I wonder if the front end diff will be able to handle the horsepower.
Im shure you have already thought this out but Im just wondering.
I try and hold my breath while painting 😅☮️
Are you running the same diameter tyres front and back?
Yes!
Sweet build,
You wanna sell that old 12 bolt?
Sorry already found a new home for it.
Awd how
What ever happened to this build?!? Why no more updates?!? 😢
We will soon. The original engine didn't follow through 🤥 that put is 6 months behind. Now the new engine builder is supposed to have it to us in a couple of weeks. Trust us are little frustrated
@@GnarlySpeedShop dang. I cant wait to see the new content about it! You guys are literally building my dream iv had for about a decade now lol.
Dangerous the way you are under car....... caution! 😢
Lowriders will teach yall youngsters alot
Snowball show the go
It would look better in my 68 C10. Ha Ha.
I guess I'm the only one that thinks that it's a stupid waste of time to make a four-wheel drive Chevelle.
For cars and coffee, yes. That's not what this is.
Yep .....
There is already a awd 80s cutlass
Rob Dahm has a awd rx7
Some guy in Florida did a awd 240sx
We live in a world fake breasts fake butts and gender reassignment surgery
A awd converted chevelle wouldn’t be a waste of time
Put on a mask ! Please........Ex-mech.....😮