3 Garages Didn't Have A Diagnostic Scan Tool Capable To Access The Special Functions Of This Ford
Vložit
- čas přidán 21. 12. 2023
- here I'll show you two tools that are capable of accessing the special function of this Ford Transit Connect 1.5 with a P2463-00 DPF Soot Accumulation code & P246C restricted performance.
I'll take you through how I cleaned the diesel particulate filter and used the tools menu system to navigate to common functions to reset adaptions of the DPF
my main tool is the Launch UK Euro Tab 3 from www.launchtech.co.uk
Kingbolen Diagnostic tools available from my affiliate link kingbolentool.com/?ref=iq39r3l2 - Auta a dopravní prostředky
It's not just having the equipment , it's knowing how to use it,, well done Mr O'Riley.
That's what she said
It's more than knowledge, it's a logical chain of analysis
Good that you show when it goes a bit wrong or takes longer. That must help people.
Been in the trade for 30 odd years myself and the garage I work in dosen't really want to get involved with DPF issues, I have done the odd few, Now I understand them much better from your videos mate and ordered the Launch cleaning fluid and gun. Thanks mate.😉
I think you’re probably right about the users not knowing the tool properly at the other garages as I seem to be alright with the Autel. Interesting video. Thanks
Well, I bought my Launch CRP129 Evo after watching your videos, so you can tell 'em they got at least one sale from you! (I did a LOT of internet research too - happy with it so far).
Good to know. Launch UK have some great tools
Launch ought to pay you for showcasing their tool before someone else makes you an offer you can't refuse.
I do like Launch UK and we support each other so I don't expect them to pay me. Like I said without there tools I wouldn't have been able to get where I am
I said this they could pay him out of good will at least he'll of made them thousands its greed on there part at this point good work jim
@@ORileysAutos
Jimmy highly technical question for you.
was that a Piroshky or a jelly doughnut sitting between your seats?
Launch is the best scanner on the market hands down when it comes to functions access
They give him free tools
You and Diagnose Dan are my 2 favourite automotive diagnostics channels... its just a shame that vehicles have become so complicated, needlessly in many cases, that one needs a degree in computers to fix them...
A DIYer can't simply pull the DPF out and fit a new one, they then need to programme the vehicles onboard system to ACCEPT the new part... and the companies putting up barriers to that process unless you use an "approved dealer" (£££) is disgusting...
Thank you for your educational vids !! 🤗
😎👍☘🍺
Thanks for a another helpful and informative video! The comparison and explanation is very much appreciated.
Really enjoy watching your videos and have learnt so much on testing & diagnosing faults. Really like it when you delve deep into using scan tools. Keep up the good work Jimmy & wish you & your family a happy Christmas and prosperous new year (try to a few days off) . Thanks again for all your hard work into making these videos. 👍👍
The Launch tool is good but as someone who just does a few vehicles there is no way I could justify such a huge price. The Kingbolen K10 is a better prospect for me and seems pretty capable and able to do everything I am likely to need.
Launch UK have just released a similar priced tool www.launchtech.co.uk/oem-level-vehicle-diagnostics/x431-euro-mot4-431-Diagnostic-tool/
Great presentation.
Great video, very honest, love the content, I’ve just subscribed.
Excellent video.Have a great Christmas.
Thanks
Nice on the perseverance and it's the extra small things that make the difference like putting that bolt where someone has obviously forgotten not to.
great videos learned a lot from you with the scan tool i have it has been a great help many thanks. Keep up the good work and have a great Christmas and a prosperous New Year
Will do
jimmy it doesent matter if you fixed it alway good to get a refresher. i love them keep them comming
Brilliant jimmy thanks for sharing that information great video very well explained and thanks for putting the diagnostic information on helps people out who after one 😊
Thanks Jimmy excellent top guy👌 have a great festive season with your family and friends 🎉
Merry Christmas
That's what I love about you brother, you see a small problem you can fix easy you fix it. Many people will just say it's not my problem. I love doing the quick free jobs to make peoples lives better it's the right thing to do you're a rare breed of human.
Well done another happy customer,the in depth use of the scan tools was educational ,I'm looking for a scan tool that does injectors on Mazda 6 2015,a fun task.I'll be adding your channel as I'm currently learning diagnostics on Schrodingers box.
This goes to show that mechanics need to be more like computer experts nowadays.
good informative video jimmy still learning, i think getting to know your tool is what its all about...
Thanks 👍
as a retired heavy plant guy and a diy mechanic i have a Xtool D9, all the data i could ever need but learning to interpret the data is another thing anyone like me can spend 1k on a tool but knowing what to look for is learned knowledge or expensive training courses sadly i have neither. i have learned a lot from you, well enough to diagnose these faults in our family cars... Thanks for sharing
Hi Jimmy I noticed you have a D1 lite well I did a 2019 connect with my D1 and it reset the dpf reset first time using my WiFi at home the only thing I could not do was clear the codes that you had as I had but signed up for autel auto auth and it cleared them thankyou for the videos 😂
Loving these diagnostic videos. Now, when the garage try and rip me off i know when they are saying. 👌
Very informative video, Jimmy!
Thanks
@@ORileysAutos 👍
The Kingbolen has an identical interface to my Topdon Phoenix which is an excellent scantool, I suspect many of these use the same software modules but are branded differently. Thanks again Jimmy for an excellent video.
They use software from Launch
Excellent video, would like to see more of the Kingbolen K10's capability e.g. can it reset the built in mileage failure you talk about for the dpf's on Peugeot Boxer or Citroen Relay vans?
I've had a similar comns issue with a Suzuki, turned out to be a splayed pin in the DLC on pin 7, the k-line.
2 hours trying to work out why I could see some live data but not all. Turns out my tool gets data from both can and k-line.
Tool was fine, the damned DLC was faulty. Probably from people being rough plugging in the obd2 connector.
Recently I had an argument with someone who was resetting soot readings on someones dpf without cleaning and claiming to have fixed the problem and charging them. Dont know if he really believed that or was just trying to rip people off.
With so many electronics on vehicles now you have to use diagnostic tools and its so important if you are getting someone to do work for you that they are honest and know what they are doing, or admit their knowledge limits.
If someone simply resets the soot levels to zero without cleaning / replacing the DPF, the back-pressure sensor will throw up the error codes immediately so I can't see a cheater getting away with it...
Well done jimmy ☘️🥃💚👍🎄
Thanks
Only wish I had the same level of knowledge, I have a small launch download to a tablet, but can't use it to it's full capability, originally bought it to do relearn on a lineatronic gearbox after replacing the unit in my 2013 Subaru Forester, I had even been told by a main dealer it was not required, went to Launch Plymouth, and they sorted it immediately,
This one could have a newer sw version on the gateway that makes the secure part of the diagnosis a bit more difficult.
Love your videos. Does this tool work on the Maxus/LDV V80
Cracking vid very interesting
Glad you enjoyed it
As far I can see the launch, think pad, kingbolen, topdon are all based on the launch software and do the same things just laid out slightly differently.
Interesting stuff, I wonder if these diagnostic tools can be used on tractors/excavators or if access codes are required from dealers?
10:10 Transit connect second bottom. Odd as the Transit courier is just listed at Courier
Another fantastic tutorial. Thanks Jimmy
Only snag we are having with Launch , we are struggling to get in touch with customer support .
I spoke with the guys at launch at mechanex show and they said sales had unexpectedly increased by 400% so they are struggling to keep up with demand right now. I'm sure it will resolve soon as they have hired extra help
Thanks Jimmy
My Brother had a Nissan Navara in Australia.....total sh98fight with DPF regeneration on short trips. Spanish built vehicle sent to Australia. End result not many mechanics able to deal with the problems.
Smart tool. Didn't let you reset the fault before getting rid of the issue ..
Regarding your earlier video and the phone problem, have you considered a second phone, and only give that number out to active/ engaged customers
You Should check the intercooler pipes first before regeneration,
I had a hole small hole and that why my one was blocked…DD says alway visual inspection first..
The pipe was replaced by another garage before I got here
It’s a transit connect
It was on manual search, but still wouldn’t of picked up as lead was not connected correctly, as you noticed.
had this issue myself with a 2018 connect , found the boost leak on the little pipe on top (sure you know the one) fixed that, then set about an acid clean , then tried resetting with autel . took ages waiting for modules to shut down , doesn't help when colleague's open the door etc.
reset just the dpf and it appeared to be fixed . road tested ok . van back after 130 miles , with regen failure codes . so after much faffing about and resetting of anything that could be reset . again it all seemed great . the van done another 130 miles and the problem was back .
I did notice some soot in the tail pipe and suggested the dpf may be cracked , at this point it was decided to get the delete bloke to delete things . now that seemed to solve all the issues and we didn't see it back again . please let us know if this one comes back and how you could diagnose a cracked dpf from pressure readings that are all quite low and will reset and look good initially . (if you get a chance )
The dreaded P2002
Hi, I have a Merc c300H with Dpf issues. My plan is to have it removed. Any issues with this ?
Also my vacuum has gone on the brake assist and I’m clueless now? Hybrid vacuum generator already replaced.
Any advice would be appreciated 👍
Hi could you please tell me how long after you have cleaned the dpf it will last before it needs to be cleaned again, only I have a ford connect and thinking of selling it only because of this problem, it’s only four years old and only done 39000 miles. Thanks Roy
Very surprised that Launch are not doing more.
I can make commission if I call and forward a customers details but it's hassle for me. We support each other so it's not all about money
Hello. what do you think of the icarsoft cr ultra? is this a good device? or you are not familiar with it. and thank you for all your educational videos, I always enjoy watching them.
220% full, whilst not a good analogy can also be snow in a bucket. Once you squash it down you can fit more in
It was in your menu btw Ford --> Transit Connect
What will be the Autel equivalent to the Launch Tab3, and how would you compare it?
What do you think of the launch pad 7 is this as good as the tab 3
Having same fault codes on a 2014 Volvo V60 D4 2.0L. Has come to “soot filter reached limit” same p246300 did come up on our work launch. Was told if it can’t be cleaned to try the launch Uk dpf cleaner. Have you cleaned many Volvos with the launch Uk dpf cleaner?
Yes I've done a few
@@ORileysAutos is it best to remove the top probe sensor to help clean. Do you still go 50/50 with the solution. Hoping in new year to get it properly cleaned just to get through xmas at the moment
he uses it for all of his videos
Just a quick one mate, Them 2 machines u got are they better then autel?
At 10 min 11 sec bottom left there was actually "transit connect" in the manual search Jimmy.
Yeah I must have missed it
That scanner looks just like the matco scanner in usa
Will the key battery low affect the connectivity if it triggers the deadlock ??
Not that I know of
@@ORileysAutos thanks Jimmy, I had a seat Ibiza once when the instrument cluster had a soldering joint problem it was a nightmare as I never knew when I could get stranded because of the deadlock. Fixed it eventually 👍
Turn off other Bluetooth devices, it often causes connection issues for me especially with MB for some reason.
Adding the vehicle in manual mode. It is a FORD-TRANSIT-CONNECT
You need a AUTEL maxis 908 s pro2
Lol i thought for 4 or 5 seconds i had a cracked screen with that ford headlight reflection..panick wasnt even close to what i said out loud...
Do you still have 2 vans on the road ??? Did you start of as Riley's. ... Then change to O'Rileys... Just interested in the story 👍👍
I had 5 at one point
It was listed (10:11)
Ah yes I must have missed it
The pins in the cars obd socket might be bent & not making a good contact
Yes maybe
Is it possible the low battery voltage was causing the communication error?
that was low battery in the key, not the car
Good point. Although it was only the key fob battery, it wouldn't surprise me if it causes problems with comms.
How can I get your services in Wiltshire?
Could you recommend us a diagnostic tool for the Trafic 1.6 dci? Maybe a three income levels recommendstion. I would like to spend Around 250€ for having a “nice” tool. Thanks.
kingbolentool.com/?ref=iq39r3l2
K7?
Done one today total peace of piss just takes ages
I was thinking after your last video Jimmy would you consider taking maybe one or two mechanics for on the job training , I could see you being able to charge £500 per candidate maybe do it twice a month 4 to 5 days on the job training plus I agree with the last comment you should be getting a good discount for selling there products good luck
Sounds like more headache to deal with
@@ORileysAutosI hope your the man that will cure my headache
China I think made launch PAD 7 with genuine launch software, simply a copy of launch tab III.
K10 is a launch platform
I know what happened. A C-Max and a Transit Connect have different names!
Would you recomend a tool close to the launch euro3 but at more of a diy price
MOT 4 From Launch UK
www.launchtech.co.uk/oem-level-vehicle-diagnostics/x431-euro-mot4-431-Diagnostic-tool/
@@ORileysAutos👍
@ORileysAutos is there something cheaper to check the pressure and mass at LRDS 2.0l without ability to reset? I want to monitor how the car feels itself but not repair/clean dpf by myself
@@kirillkirvas455 CRP 129 Evo from www.launchtech.co.uk
That style of dongle on the kingbollen is unnecessarily thick , in many cases will not fit well without using short cable.
Definitely agree
Aren't the smaller Ford vans powered by Peugeot engines?
secure gateway from 2019 i believe you can get bypass cables to get around most of them
How would they not have forscan 😵💫
I don't even have it 😂
Says more about Ford's practises than the garages imho
So was there actually a fault or did it just need cleaning??
Did need cleaning, the value pressure was reduced as the cleaner was being added
@@Mr-P1977 AHH ok so next question it was doing small journeys and the dpf not completing it full regens that caused the problem?
He Didn't say
@@Mr-P1977 yeah I no I was just curious that all
The cause was a split boost hose that the last garage did replace
So, both codes clearly stated 'Particulate Filter Restrictions' and 3 garages failed even to clean out the filter first and then, second, to attempt to clear the codes before handing over to someone who could. Ridiculous. They must all have my £14.99 scan tool!
I see no links
my main tool is the Launch UK Euro Tab 3 from www.launchtech.co.uk
Kingbolen Diagnostic tools available from my affiliate link kingbolentool.com/?ref=iq39r3l2
Links are in description
You're getting a dry throat - will you be having a Guiness later? :-)
Always time for a few creamy pints
Great you cant use some of the tools capabilities without internet and a subscription.
Name them....
You need 2numbers and freelance callcenter who will book the job or in rear cases put call trough if you want to help some guy fix its car. I guess.
No , 100% is full. A number above 100% makes no sense.
Its like ford blocking u out of the software so the customer is forced to take it to them! Yet they havnt got a scooby doo and will sell u every part but the one u need. Disgusting behaviour as if the locks aint bad enough now this
why would you do a forced regen before you put a cleaner through first, lazy and no common sense
I did not do a forced regen at any point in the video
i know you dont do that, i was refering to most garages that do that, i have traded cars for 30 years watching your videos have saved me a fortune instead of deleting or replacing the dpf i insist on cleaning now cheers,@@ORileysAutos
People just dont listen to professional advice , you said you could cause damage to the DPF doing that @@ORileysAutos
bravoooo