Video není dostupné.
Omlouváme se.
How To Install Door Trim Casing For Beginners! | Paul Ricalde
Vložit
- čas přidán 16. 08. 2024
- Whether you're a DIY enthusiast or a carpentry beginner, our video provides step-by-step instructions to achieve a professional-looking finish. Visit my website for more home renovation resources, promo codes, and discounts on great products at www.paulstoolb...
Learn to measure, cut, and install door casing precisely, avoiding common pitfalls and ensuring a flawless fit.
⏰Timestamps:
00:00 Prepping your Walls for Trim Molding.
05:34 Tips for Cutting and Installing Trim.
09:40 EZ Pro Texture Demo and Giveaway.
Install Door Trim/Casing and get perfect joints even if the walls are OUT or PROUD. EZ Pro-Texture giveaways are also in the video.
EZ PRO TEXTURE WEB www.ezprotextu...
Metabo 36V Compressor amzn.to/43fDzM3
Metabo 18V impact driver amzn.to/43fL0CR
Metabo 18V Pin Nail Trim gun amzn.to/3Uk9uqG
Dewalt Double Compound saw
Starbond CA Glue amzn.to/3GpKBUT
TiteBond wood glue amzn.to/3Ugvz9E
Ryobi 18 Gauge Nail Gun amzn.to/3GofHMk
This video is about How To Install Door Trim Casing For Beginners! But It also covers the following topics:
How To Install Door Trim Easily
DIY Door Casing Installation Guide By Paul Ricalde
Simple Steps For Door Trim Setup
Video Title: How To Install Door Trim Casing For Beginners! | Paul Ricalde
🔔Want to learn the tricks of the trade from a seasoned home improvement pro? Join Paul Ricalde, a home improvement expert, and subscribe for the latest renovation tips.
www.youtube.co...
🔗Stay Connected With Me.
👉Facebook: / paulstoolbox
👉Website: www.paulstoolb...
=============================
✅ Recommended Playlists
👉 Bathroom Remodel
• Burn and Stain wood Tips!
👉 Videos
• Repair Replace Door Ja...
✅ Other Videos You Might Be Interested In Watching:
👉 Easily Repair and Finish your Ceiling!
• Easily Repair and Fini...
👉 Easy No Mess Trick to Remove Popcorn Ceilings
• How To Remove Popcorn ...
👉 How to make EASY POST CAPS for your Fence, Deck, Gate, or Mailbox
• DIY Tips: How To Make ...
👉 Raising Fence Height with existing Posts and Rails
• Cheap And Easy Way To ...
👉 How to cut Vaulted Crown molding for Dummies
• DIY Crown Molding For ...
=============================
✅ About Paul Ricalde.
Welcome to Paul's Toolbox, where home improvement expert of 25 years, Paul Ricalde, provides in-depth videos that teach beginners how to renovate their homes using the most cost-effective and efficient tools.
Be sure to subscribe to view the latest home renovation tips
Paul’s work as a professional kitchen designer, bath designer, and hand tool inventor has led him to consult and work with the top tool companies across America. Now, he can recommend and advise which tools you should use to complete your home renovation projects, providing discounts on those tools along the way!
Watch more of Paul’s work with master contractor and Emmy Award-winning television host Brian Gurry on the reality-based home improvement and commercial construction media brand American Builder at www.actionchan...
🔔Ready to take your home improvement skills to the next level? Subscribe for home improvement and cost-effective renovation tips, and make your dream home a reality!
www.youtube.co...
=================================
#doortrim #diycarpentry #homerenovation #triminstallation #molding #homeimprovement
⚠️Disclaimer: I do not accept any liability for any loss or damage incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your research.
Copyright Notice: This video and my CZcams channel contain dialogue, music, and images that are the property of Paul Ricalde. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to my CZcams channel is provided.
© Paul Ricalde
Where are you Paul!! It's been 3 months and your fans miss you! I hope all is ok
Thinking the same
Paul, You make your repairs look so easy. The true example of a craftsman!
Thank you Dominick! It's's always great to see your comments my friend. Sorry for getting back late , but I had a very busy week.
Just want to say you have always been one of my top favorite CZcamsr. I remember making a fence just from ur videos years ago and you always had great house repairs . Thanks for your knowledge in teaching others!
Thanks, I really appreciate you! I'm sorry for not being around for a while, I had a really rough year but coming back and hopefully staying this time...
I have been a painter for 45 years, I have learned a lot of tricks from watching your videos. I always use those spray cans of texture which are not that easy to get an even texture. Thank for everything you do.
Hi Jeffrey, thank you for continuing to watch my videos and for taking the time to comment me! Please go to www.paulstoolbox.com and send me your complete mailing information. EZ ProTexture has selected you as a winner of a Texture gun kit! Thanks again!
Hi Jeffrey, my website seems to be having trouble. Please send me your mailing info to paulstoolbox@yahoo.com. You won a EZ Protexture gun kit..
Thanks buddy!
If Paul makes a video it’s always worth watching as you’ll walk away learning something new even if your in the trades. We all can always learn a new method which often times makes you life easier.
Good morning Clint... Congratulations you won an EZ Protexture kit. Please go to www.paulstoobox.com and send me your complete mailing information. Have a great day!
Hi Clint, I am having trouble with my web site inbox. Please send me your mailing address to my email, paulstoolbox@yahoo.com
Thanks my friend!
Paul
Thanks for another great tip. Wish I had known years ago when I was making up for gaps with caulk. Great tip on ensuring length of trim vs relying on a tape measure. Can't go wrong this way.
Thank you Ron, I plan on doing short videos to show simple tips that I've used over the years. I'm sure you have a number of tips yourself, we just use them without thinking of it.
Another great video. When hurricane Harvey flooded my house, I started watching CZcams videos on repairing and remodeling. When I found your channel I used it exclusively. I learned so many good things, I even showed them to my general contractor for the work I was doing myself. He was impressed. I am starting a new home build in Spring, Texas. I have already given specific instructions to the builder for things he is to do based on your teachings. Next time I drive to New Orleans, I will see if we can meet. Thanks again for you teachings.
I would love to meet up John! What part of Texas do you live in? I lived in Harlingen when I was a kid and South Houston in my teens, been in the New Orleans area ever since.Have a great weekend buddy!
Great way to fix door Trim, that new sprayer looks great
You always make everything look so easy with your tips and tricks! Thank you, Paul!! It's great that we're back to getting your videos regularly! Tell Elsie Hello!!!
Thank you as usual SandiRose.... Great to hear from you. I'm going to tell my buddy Elsie Hi and take her for her walk soon. Beautiful day today.
Looks way easier than the old hopper system I’ve used for years! Thanks Paul!
Thanks it really is , but it's not meant to take the place of a hopper. This tool is made as an add on for the professional. It's Fantastic for small jobs, patches and touch ups because you can get a professional look and be done in minutes... from set up to break down and cleanup.
Enjoyed the video.Great tips.The texture demo was awesome. Great for small drywall repairs.
Thank you! Yeah this is specifically for small repairs and touch ups. Definitely has a place in my toolbox. Have a great weekend!
Hope all is well sir. Stumbled across your page and glad I did. Thank you for making great videos
I always enjoy your work. Thank you for the extra side tips like flipping the header trim to mark the cuts. So simple but awesome!
Thank you Paul! When it comes to molding, I need all the help I can get.
At least you are trying, I could'nt swing a hammer properly when I first started..LOL
Excellent tips, I never thought of trimming out the drywall & shiming back for drywall proud of the jamb, I have 2 doors like that right now!
Thanks Mike, I really appreciate you taking the time for me. Let me know how it goes and have a great weekend!
Thanks for the breakdown , now I feel more confident on fixing my own door!! Always enjoy learning from your videos Paul.
Whatsup my brother Melvin??? I took off Monday but coming in to do canal rescue training... can't skip out if my crew is doing it!
Need that sprayer to blend in some knockdown in my master bedroom.
My drywaller left me hanging halfway because he needs surgery.
Like the tip on the doortrim. Have a few that need some adjusting.
Thanks for sharing. Had never seen the upside down measure tip before. Very helpful.
I like the way you explain why you're doing it the way you are.Nice job!
Thank you Elaine, I try to explain the important things because I would get so frustrated when I wanted to learn something new and they would skim over it thinking it's common knowledge. 🙂
Always learn new tips watching your videos. Thanks Paul.
Ok I just went back and fixed my trim ,that works great. THANKS PAUL
I love hearing news like that, thank you for sharing!
Great to see another great video. Hope the family and you stay blessed
Hate puttin trim of any kind. love your upside down trick to get the measurement of your top trim. I have the exact issue with drywall. Now I now how to address this. Cheers
I do alot of drywall repairs and this seems like it eould be an incredible time saver thank you looks like you do great work
Thank you, Casey, have a great night!
I have to admit, that was an awesome set of tricks!
Great video. I've had similar problems in the past, but I ended up just using a scraper and kind of scraping away part of the drywall until it's flush with the door jamb, as I knew there weren't any studs behind it if I were to fully remove it. It's messy and annoying, but it works. From the side of course, you can sort of tell that the casing is thinner, but not really. You have to be told and/or get a tape measure out.
Good morning Val! I always say my way is only an option and not etched in stone. You figured out another way to acomplish a task and it worked. Cheers my friend and thanks for sharing!
Small texture guns like that are great for small patches and tight areas!
It's the cleanup, then ease of use that has my attention. valuable video too
The orange peal texture is AWESOME!!!
Some good stuff right there. I like the shimming method after cutting out the too thick drywall.
Been looking at the EZ-Pro system for a while and wondering if it's any good. Now I know it is. Looking forward to getting my hands on one!
Thanks again my friend, you were added to the list for the contest. I first met JIM the president of EX Protexture a few years ago when I was renovating my mom‘s bathroom, before she passed away. JIM sent me an easy pro kit to try out and I loved it. I shot her whole bathroom with the gun and I’ve been using it since. When we first spoke, he asked me if I was a fire fighter and I told him yes in Louisiana, he was a fire fighter in California before he retired, so we hit it off. Been friends ever since. Happy Easter, God bless you and your family!
I can't tell you how much time and money your videos have saved me.
I have the same problem with the sheet rock protruding past my door and now I know how to fix it.
Awesome Richard, I'm sure you will tackle it like a champ! Thank you for taking the time to watch my videos and have a great day!
The method you demonstrated on marking the top trim is invaluable. Using a tape measure doesn't offer the simplicity and accuracy. Another great video.
Thank you my friend! I have a simple mind myself so I love simple fixes...lol
Been in maintenance for 30+ years and learn something on all your posts. Keep it up.
Thank you Sherrell, I really appreciate you! I'm sure you could teach me a a few tricks as well.
Have a great day!
I am ready to tackle my first house flip! You are makings think I may just be able to do it!😅. Great how to videos!
Thank you Kris, I’m sure you can and will! Have a great day!
Hey Paul Great job and I also need my reading glasses... hehe
Great tip for making those 45 degree angles. I’ll be updating my closet frame soon.
Thanks
Thank you Brad, that's funny because I have my closet on the list for updates as well. Love to see some pics when you do it! Have a great weekend!
@@paulstoolbox thank you
Great job. Loved the tip about turning the molding over.
Thank you Kayak, That was not my idea but I have been using it for nearly 35 years... I learned it from a trim carpenter when I had all my hair....lol
What a great tip. I have done it differently in the past. Will be doing it this way from now on. Thanks
Thank you Diana! I still learn new things, but I'm at the age where I forget more than I learn LOL😜
Have a great day!
Great job, Paul! Looking forward to giving that EZ Texture setup a try on my next jobsite! Using the hardboard/Masonite is a way better idea than beating down the drywall with a hammer like so many guys do!
Thanks Al, I use plywood a lot too but I always have something useful in my shed...LOL just had to knock a little dust off of it.
You can take a big cable tie wrap it in a u shape stick the two ends in a drill place the rounded part in what you want to mix and turn on the drill, it will mix anything if the viscosity is right.
Wow you make the knockdown look easy
Thanks for the info it really helped me install the door casing properly
That was an informative video Paul thanks for always sharing you great tips ❤✌🏼 have a blessed Easter 🐰🌷🙏🏼🕊️ my friend
Great job on the door trim! That's a handy tip on laying your trim across the top to mark it!
You do a great job Paul. I always learn something new from you.
Thank you Ralph, I really appreciate that! Have a great weekend!
Hey Paul, I really like your videos, I always learn something when watching, thank you.
Hi Robert, thank you for watching my videos I really appreciate you. Have a great day my friend!
Wow was a good idea I like all your videos
Thank you Paul. If I had the thingy that sprays the texture on the walls I might remove the popcorn ceiling!! You always give the best tips and tricks, I appreciate you very much. Hope your doing well, be blessed my friend.
You are too kind Paula, Thank you and have a great day. P.S. We will be giving away a lot of these guns!!
Great tips! Love your attitude and enthusiasm - praying your success is contagious!
Thank you Jeffrey, your thoughtfulness is definitely contagious! You made my day better. Have a great weekend!
I shared this video To my facebook page
Perfect timing Sir! Window casing refinish project has begun at my house and now I know how to properly fit the trim. Thanks for sharing your knowledge!
That's awesome M Brand, thank you for sharing that with me! Is that your car in the Avitar? Love it!
So glad you're back!
You da man. I do construction and allot of finish trim. I'm missing 2 legs and 1 arm. By a train acaccident in 1991. I never thought of flipping the board upside down to mark it and perfectly at that. Thank you for making my jobs not just a little easier but allot easier for me. Always used tape measure.🦿🦿🦾
No Eric…you da man! Thanks for watching and please go to Paulstoolbox.com and give me your full mailing address. You are a winner of the EZ Protexture kit!
Beautiful job!!
Thanks for the great information. I have been basically rebuilding our was once going to be our weekend getaway to now be our permanent home. I will save this video and be sure to subscribe to your channel.
That gun is really neat it does a nice job thanks for shoeing it to me
I always enjoy your videos, I’ve learned a lot of tricks watching you
Good morning David, thank you for taking the time to wash my videos, my friend. Have a happy Easter!
It seems you read our minds Paul, just when we need and what we need. Thank you from Avenal Ca.
Great video I’m working on my kitchen and always have problem like you explained thanks for the advise
Anytime Edward, I'm glad I could help. Thank you for taking the time for me as well! Have a gret day!
Excellent stuff right here!
Like the trim trick..
Thanks for the vid. Going to have to get that set up. Very cool.
Well done. Props from Boston - Gonna try this myself, sadly without that dope metabo
The trim tip was great.
Wow, I would never have thought of that. Thanks
Great tips and gadgets...glad to see you doing well
Great vid thank you!
Great video, just in time for my next project.
Great tips, glad your back!
That is pretty neat. Looks a lot less of a pain than it is to pull out the big hopper. To bad my hopper doesn’t clean near that simple.
LOl we need a self cleaning Hopper! This is an awesome tool but unfortunately the hopper is still needed.... This gun is the perfect add on in my tool box for small jobs, patches and touch ups. Have a great day and thanks Mike!
Cool video. I needed this video to trim the door on my shed shop that is a bit topsy turvy. Great video.
23 gauge pin nailer is handy for tacking trim firm. Please add my name to your drawing for texture tools I used that can knockdown stuff that is not as good as the texture kit you showed on your show. Say hi to Elsie!
Keep those fix it tips coming.
You are definitely added my friend, we will be giving EZ Pro Texture products away for a good while. Have a great day!
Good to see you back making videos, Paul.
I have a small drywall repair job on my parents ceiling which has an orange peel texture.This would be perfect for that. 👍
You are added to the list my friend, My buddy Jim with EZ ProTexture is going to be giving away these spray guns often on my videos. Thank you for taking the time to watch and comment!
That looks pretty easy something i might try
Great video love how easy that is for knock down.
Hi Kurt, it really is easy but if you are doing a large area you should use a Hopper. This is awesome for it's intended purpose. Small jobs, patches and touch ups mainly because of the convenience. Thanks for taking the time to comment!
Great instructional video. I wondered how to repair that situation, just happen to have a sheet of luan too! You gave me info on my next nailer too. Thanks subscribed
Thank you Scott, have a great weekend buddy!
Thanks so much you explain procedures very well. 😊
Thank you, Christopher, have a Happy Easter!
Learned some cool tips. I do a lot of trim and finish work. I'll definitely be putting these to work! Thanks
Thank you Billy! I'm sure you have a lot of tricks up your sleeve yourself. Have a great weekend!
You help me a lot to fixing my house.
wow, those are a bunch of cool tools. Love the tips on the casing. i have several to redo for the spring, great timing.
Thanks Clinton, I really love this set up. I'm a huge tool buff so I'm always looking for new things....lol
Have a great weekend!
thanks i always get so much information from you
Nice tip on trim. Thanks
Very easy to follow along.
Beautiful job!
Thank you! Have a great weekend!
Very informative as always!
That looks like a nice easy setup. And fun to use. Nice video
Looks great... u make it look easy
Thank you!! I appreciate your knowledge!!
Great video as always. Nice to see a fellow Louisianian on CZcams.
Always great and informative information. Thanks 😊
Hey Mark, I really appreciate that buddy. Thank you for taking the time for me!
Really appreciate the tips. Keep them coming!
Thank you DJ, I will do my best! Sorry I have been missing for a while I had several health issues last year that set me back but I'm on the trail again. Have a great weekend!
Nice work 🎉
As always another great video!
Very nice Paul. Thanks.
FANTASTIC video!
Thanks for the great videos Paul!
My pleasure, thank you for taking the time to watch them! Have a great Easter weekend!
Sweet I have learned a lot here .
*Paul been a long time, Have you been on a skateboard lately?* This is ken, A k a easy two tips and tricks. I hope you're still putting up vids,, Hope all is well with you and yours. Merry christmas and God bless you, by for now, Ken
Like the tool easy to use for repair
Man your nailing it!
always enjoy the content!