Get Perfect Seams Joining Trim and Mouldings
Vložit
- čas přidán 23. 07. 2024
- MY WEBSITE:
www.thefinishcarpenter.com
THE GLUE I USE:
www.thefinishcarpenter.com/shop
EVERY TOOL I USE:
www.amazon.com/shop/dfwcrownm...
HIRE ME FOR A PROJECT:
www.dfwcrownmoulding.com
. ... FOLLOW ME ON INSTAGRAM :
/ dfwcrown - Jak na to + styl
Check out my store! www.dfwcrown.com
We have a supply of CA glue that I use in my videos!
Kateelife
Kateelife
This guy is tops
Finish Carpentry TV couldn't you stand up the crown against the back rail, and 45 the seam? Or even the 22.5? (Corner mitres maybe flip.) That is.......if you don't have the little kicker\ adjusters that you use? Just curious. Definitely like you're work and yes.....keeping the eye away from seams is a pro thing. Hide the seams. You're in a nice neighborhood for a reason. Did you make you're overall length a little bit long for the snap in technique you referenced? ( On purpose I mean, like a strong "16th") Well that and your spackle and glue makes for a snug, nice installation. Good job man! Really good tutorial.
Paul Meinart s
Nice to see a young craftsman take such pride in his work and be willing to share his techniques.
He is incredible. Excellent explanation too.
Dude ... SERIOUSLY?? To be a MASTER Craftsman at such a young age is a special kind of incredible. Love watching you work and talk ... you are soooo laid back and calm, showing confidence like knowing the back of your hand. That's a far cry from the weekend DIY warriors like myself who spend more time cursing during projects from frustration, than actually working. LOL! WELL DONE, SIR!
This is probably the BEST channel for carpentry I've found. Outstanding.
Thank you so much for this video- My husband passed away recently and I am faced with doing lots of little things. I fixed 2 pieces of baseboard molding using your instructions. At least I don't see the seam anymore! You are a great teacher.
as a painter, I love working on trim after professional work like this. makes me look better too.
Makes us all Look better for sure.
Also a painter and I can not agree more
Might feel differently if he left all those nail holes to fill.
Just love it when a tradesperson shows special attention to details. He should be very proud of his work. True craftmanship.
I’ve been doing 45s for 40 years. You my friend just taught an Old Dog a new trick! 22 1/2 it is from now on.
I watch these videos several times, over the course of weeks, along with some of his similar videos. After a while, it all begins to come together as he uses the same techniques in different ways on different projects. It really is a craft that takes time and effort to learn. He's very thorough.
Amazing. Thanks for teaching us. I just did a whole house, the customer loved it. Thanks to you!
Thanks! You gave me the instruction I needed. I'm a first time moulding hanger, and I've got the confidence to do it alone.
Been watching you for a long time just for the joy of learning more woodworking skills. I have learned a lot from your videos.
Recently one of my children purchased their first home. Wanted to replace the baseboard as it was dated and worn.
This video was a huge help in getting a clean joint on a long wall. Just what I needed.
Thanks and keep sharing. We need it
That's the type of shit that separates the pros from ametuers!!! Then, he freely shares his knowledge in hopes of others benefiting from quality work as well. It takes a person who is confident in their work to do that!! I'm subscribing to this channel based on this video alone!!
Not really. This is the type of shit that separate people who want to spend a lot of money on their trim from those who don't.
Your a cowboy as well
I always tell people to wait 4 years to put crown on new home. Luckily our builders charge an arm and a leg to do it, so we get a LOT of crown molding jobs. Easy money
All that work on the sanding should be spent on markin studs and shooting into wood. Oh ya and cope your corners! This guy has attention to detail, but the wrong game plan. Come back in 5 years and you'll see why
@@andrewelmer9266 he does not need to cope the corners, the moulding is getting painted, easy to fill any gaps and paint, however he may even of measured the corner he's confident enough that the 45 degree will work. Cope the corners of it's staying natural or getting stained etc, totally agree there.
I've watched a number of your videos.
You clearly had a great ability to TEACH others how to do trim techniques.
Professionals...as well as HOMEOWNERS...would do well to watch your entire series.
I'm about to tackle my crown and base boards. I wanted to thank you for putting these vids out for us to see you do it. very grateful
I love the "welding wood" comment. You have some great skills. Thank you for sharing your knowledge with the CZcams Community.
You are really helping me bring the quality of my work to a very high standard. Thank you!
Excellent video’s!
You've made me realize something... I did a horrible job trimming my living room. Fudge!
Learning the hard way sucks! Lol.
You are not alone!
That sure had to be hard to use the word FUDGE!!! Lol!
A little caulk and a little paint, makes a job what it ain't
i made a mistake too
My friend, I hope you get top dollar for your work. I'm a Trim Carpenter myself and Most builders don't want to pay for the quality of work you are doing. I've watched some of your other videos for vaults and funky cuts, absolutely stunning work. I had to sub your channel and hope I can learn some different techniques for more custom work other than your standard basic trim. Thanks for making these types of videos for other carpenters such as myself and also beginners.
It is very hard to find builders that would pay for that quality, but I'm pretty sure he's on the remodeling end. I've been in both worlds and I've never found appreciation from builders for quality craftsmanship if it means they pay what's fair for it.
true
+T L S This is the thing that most people seem to overlook. Quality craftsmanship is what most workers want to be doing but you're limited by the client's budget, and most of the time there just isn't the budget there to allocate this amount of time.
But does it really take all day just to do good work? I bet if the the camera was turn off, as well as his teaching mode, he could whip that together in a few minutes.
Of course not, but when you're doing every aspect of a job to a high degree extra time costs money. This isn't to say that craftsmen are unable to do good work fast, but to do every aspect of a job to the highest degree of skill with the available amount of time is rarely feasible - I don't think any homeowner of craftsman would disagree with that.
Richard, your videos and instructions have given me the confidence to start crown molding installation, as well as board/batten, shiplap, nickel gap, and some wainscoting. Thanks to you, I've had great success and now every family member and neighbor wants to "hire" me. Thank you for inspiring me. As for building your own doors from scratch, you're doing an awesome job, and it's enlightening to see that just like me, you continue to learn, and improve every day. Well done!
It is very rare these days to see someone take such care and pride in their work. Thankyou.
We are in the midst of doing our place so I've been watching all of your videos and have learned a lot of tips and tricks... the main reason why I chose to do this myself is because it's hard to find someone that takes pride in their work so I figured I would give it a go, but it sure is nice to see the pride you put into your work, it gives hope people may start to bring back that trait... thanks for the video help...
Hi watched your video and its a great instruction.
Im a carpenter, interior system and finish carpenter.
Not easy to work with crown molding. The splice you used 22 degree is the method i use.
Conspicous placement over the cabinets great choice.
These lessons have taught me so much. You’re videos are so incredibly valuable in my DIY work at home. I’m doing work that looks professional and I’ve never done crown. Thank you!!
I'm a DIY homeowner that is adding crown moulding to a master bedroom.
The videos you have shared here have helped quite a bit in figuring out joints on the longer runs...
and doing inside/outside corners.
Thanks for doing these videos.
I'ts also impressive how he lowers his voice when he's in the customer's home. This guy is a good contractor!
Most contractors are hacks....let's call this guy a craftsman.
@@XBKLYN you’re kidding right? I’m sure the neighbors aren’t very thrilled with all the saw dust going everywhere. No blankets, no nothing. Then the dumbass admits to pulling up the concrete? I’m sure the homeowners are thrilled.
@@mim2046 😂🤣🤣🤣
Because he doesn't want the customer to know he's charging them to make a CZcams video.
@@CurvedSlightly 😂🤣🤣🤣
Just used this tutorial to join seams in my newly installed crown moldings. Absolutely perfect technique! Thanks so much!
Great tips, particularly on the choice of the scarf joint, the uses of the Bosch laser measuring tool, the practical uses of CA glue and the spray accelerator in finish work, the use of light weight spackle, the quick cuts with the chop saw, etc. A little something for every DIYer.
Nice job
I totally get the "having competitions to find the seam"
It makes good carpenters better
Man I'm so glad I came across your channel I'm new to remodeling and I want to do the best job I can. Your vids are awesome
Richard, I probably have already commented on this video - so appreciate your generosity with your knowledge - your kindness is awesome. I hope you continue to have great success!
You have a great manner in which you pass on your knowledge , I hope you take great comfort in knowing you are both educating and entertaining your audience.
Just followed this man's method on some baseboard moldings....absolutely fantastic; cant even find the seam....thanks brother!!!
I am a old retired craftsman that does appreciates a person that cares enough about their work to get it right and better and better.. I would like to suggest after applying the compound use a damp sponge for removing abundance of material, then letting dry for a few minutes wipe again and after almost dry wet sponge and wipe even more... Sanding is not needed most of the time... Just a food for thought... Roger Fossette
I really admire a workman that does their absolute best with no shortcuts. Great job! If I ever need trim work done, I hope I find someone just like you,
I have been doing finish carpentry for years and I learn something new in every video of yours.
I LOVE this channel. I wanted to become a finish carpenter back in my 20’s but I was a working musician and didn’t want to risk my hands around power tools every day. I’m now a technician and make a good living, I’m 51 but always watch this kind of stuff because I miss not having pursued this as a career.
Keep up the awesome work. Maybe one day I can rent a workshop and build furniture for a hobby 😄
When I saw his name I thought he was a carpenter from Finland. But then I noticed the houses he worked on didn’t have a Finnish style.
I'm a builder and i've never seen any of my guys take the time to properly make a seam disappear. They all make excuses about their seams coming apart later, now I know how it should be properly done. Great job!!!
I've never seen a builder build anything except his own ego.
Good chance you don't pay properly.
He builds garbage houses , if you watch his videos they are evident of that.
yeah i'm a trim carpenter and they are usually quantity not quality. Want done fast and a good job. lol not happening
You're not a builder, you're a contractor. There's a huge difference.
I'm going to put more thought and precision into my future projects after seeing how much you care about your work. Thank you for sharing this with us.
I've been a carpenter for over 20 years and I totally enjoy this guy's videos. He is great trim carpenter and smart to do videos
OMG! I feel the love in your workmanship. I watched this whole video and I am not even interested in doing this, but if I consider it I would want to hire you.
Are you Americans on drugs his work is shit
@@user-jx2ei1kh4q, please show me what you would do.
@@user-jx2ei1kh4q are you blind
@@scottpreston5074 he can't it is just words
Troll 😂
Wow, love your channel. I’ve been doing trim for a lot of years and just never really knew the whole backer board trick. Now I can apply this to 16+ ft headers and such and spackle the seam instead of caulk! I will have to try the CA glue, been using hot glue gun with Gorilla glue sticks with pretty good results but CA looks less messy:)
Kudos to you for the talent and quality of work you do.
Finally building a house for myself. Can’t wait to use some of your techniques when installing the trim.
I enjoy watching all your videos.
This is by far the best video on CZcams. You really understand the art and technical aspects of your craft! Excellent job explaining and showing each process. Amazing!😊
Love your excellent videos. One helpful hint for you. Put your CA glue on one side and spray your accelerator on the other side. As you bring the two pieces together, your glue kicks off. You have more time to bring the pieces into proper alignment before the CA glue is permanently hardened.
I'm a professional painter. I wish I worked behind carpenters like you. Well done!
Love the technique . Something I'll definitely incorporate into my trim installation. Thanks and keep the videos coming
I can tell you're a perfectionist, and I like it! Great job, very thorough in your explanation and your work. No one will notice that there's no seam - but people notice when there is!!! That's the point, don't give em something to complain about! Nice work guys. I'm not even doing crown molding but I watched this whole video in suspense lol.
This is a clear demonstration of the difference between shotty apartment maintenance and professionals.
Suave Chiang these are just really good apartment maintenance guys...pros would be installing poplar not mdf
Michael Osmon you have no idea what the moulding industry is like. very expensive mouldings are made of polyurethane. not poplar. MDF is the heartbeat of the game at this point. check my stuff. I'm not a maintenance guy bro.
dfw crown Yeah and all your nailguns are made of plastic these days, doesn't make it the best option, just cheapest for production and profits. I install trim everyday man you don't know me.
I make 8 profiles of crown from any species in my shop. Tell me again how I don't know the industry
Michael Osmon you don't know the industry.
Love watching a craftsman at work, its a lost art. Great job, I'd hire you in a new York minute.
Richard is a finishing baller and what makes him the pro that he is, is his willingness to share with those like me, without the selfishness or concern of someone stealing ideas. Thank you Richard. Phil
This video changed the way I've done molding for the past two years, Now I make whole super glued sub-assemblies to go around end walls. Best fitting corners ever, even on less than straight walls. Thank you, thank you, thank you.
Drydex will crack when you lift it up from the prep surface. I prefer to finish the seam after the installation. Btw, Crack shot works better.
I’ve been watching some of your videos for the last few months. Rarely am I impressed by guys on CZcams. Most of them watch a video and by the next week are posting an almost copy video showing others how to do what they are doing. They are suddenly an expert in that field because they’ve watched a few videos on the subject. You sir know what you are doing. You are dedicated to your craft and do it very well. I rarely hire someone to do work around the house because I am rarely impressed by their work...so I just do it myself. I’d hire you in a second to do trim work around here. You are very well spoken and a hard worker. Most young guys could learn a lot by watching you. Keep up the good work. If you ever come down to H-town, I’ll take you out for a beer
Sorry mate he hasn't got a clue
Over all - Excellent video. Please let me make a few suggestions.
1) I've been using CA glue since 1979. Looks like you're using Bob Smith brand which is a good, general purpose CA glue. CA glue's come in Thin, Medium and Thick. In this video you used thin. No problem but please know you used way too much. CA glue's will hold just fine WITHOUT the use of an Activator or "Kicker" as we call it. Simply place it on ONE side and then put the two sides together and hold for a minute or two. The use of Activator (i.e. Kicker) is just to make the glue set up faster. However the problem is if you kick off the glue as you did.. it immediately wants to set... thus you had to shove your 2 pieces together quickly. And, sometimes you can't get your joints lined up straight before the glue kicks off. The correct way is to place Thin or Medium CA glue on one side. Position your parts together then KICK off the seam with the activator. The Activator will get into the seam and kick the glue via capillary action.
2) Another problem with kicking off the glue they way you did is that you had to use way too much to give you time to position your parts. CA glue is kind of expensive so that was a waste. Next, looking at the bottom you had chunks of HARD glue and dirt / concrete. Sanding off hardened CA glue is... well it's HARD. The kicker makes it foam up and it makes little hard glue spots which are hard to sand. 3) Last, you should consider sweeping the area you are going to work on of all debris before your work on it. Dirt, grit, sawdust... whatever. I like to buy wax paper from a Dollar Store and put down a 12" piece. CA won't stick to waxed paper or if it does... it will peel off easily.
Keep up the good work and thanks for all of your video's.
Kolin Ken l.p.
Appreciate the knowledge - makes a lot of sense.
Great advice! Had no idea activator could penetrate from surface into seam. This will greatly reduce my anxiety on glue ups from now on.
He probably ground some dirt into the face of the molding when he flipped it over to glue the backer board too.
Correcting some of Kolin's correction, with more fine points:
Kolin is correct in that you don't need the activator for CA gluing of a wood joint, and that the purpose of it is only to accelerate the curing to save you some time. Also very true that in the video above, Richard is using far too much glue. The stuff is truly powerful, to the point where less is far better. Also far less expensive that way! I personally use small dots of it along one side of a joint when working on baseboards or casing, or short dashed lines of it when the joint is larger. This has the extra benefit of allowing the glue a place to expand to when pushing the joint together, which also allows the joint itself to be more tightly pushed together for a superior fit/result. Otherwise, you're trying to smash a giant smear of that glue into a paper-thin plane. It'll actually hold the joint farther apart with that much applied.
Secondly, spraying activator directly on the glue like Richard is doing immediately starts the curing, which hinders the glue from spreading out properly when pushing it together. It also drastically shortens the time you have to orient the two pieces accurately. Pretty much why he suddenly had to shove them together. What happens if you miss on that first try is that you have to cut the piece off and do it over with another section of crown, saving the cutoff for use in another location. On that note, having to actually sand the crown down to get it to fit means you did miss, and it'll 100% show once finish paint is applied.
The proper use of CA and activator is that the glue is applied to one side of the joint, and activator *to the other*. This gives you more time to correctly orient the details of the pieces and push them together carefully, instead of a panicked shove. Two helpful tips are: 1) However you choose, be sure to push that CA glue a bit into the fibers of the one piece for a better connection, like maybe with the tip of the applicator bottle. And 2): Allow the spray activator to evaporate for a few seconds before joining the pieces. The wetness is only the acetone carrier of the actual chemical that 'kicks' the glue. Once the acetone evaporates, it'll leave behind that chemical to do its job and bond with the glue when the pieces are joined.
If you've done all the above and slowly/carefully pushed the pieces together (yes, you'll have time), you should have a joint that needs no filling or sanding whatsoever, paints up beautifully, and is super strong.
Last point: *always* respect a client's property. Yes, that even means the sidewalk. I'd be pissed if I hired a finish guy to do some trim on my house and he didn't put something beneath his glue work and left blobs of it all over my sidewalk. Just saying, as this is super common mistake that tradespeople make, and an easy adjustment to make in your routine. I guarantee it'll make you a star when that certain homeowner takes notice of how much you cared about all areas of their property.
Great video, probably the best seam I've seen, I couldn't see it before you filled it, painters must love working on your installs.
Excellence at its Finest! I’m so glad I found your channel. I’m feeling a lot more confident on installing this in my living room now. Thanks for sharing 😊⭐️⭐️⭐️⭐️⭐️
From a master carpenter, excellent job!!
Remember to find the studs in the wall......
Sorry you are not a master carpenter his work is a mess
Bro!!! All the praises you get here in the comments you deserve it, you are a true craftsman. God bless you. And thank you for sharing.
Its good to see people when they care about their job quality and pay attention to detail!!!!
Excellent video - great job describing every step and reasons why attention to detail counts. I'm learning a ton!
Wow! I've never seen that technique before! I'll definitely try it, the next time I'm doing something requiring a seam!
cool. let me know how it goes
You are good, young man! A skilled workman!!!
Thanks so much for your videos. I keep on learning so much from all your vids . I appreciate the tips and overall knowledge you share. Your humility and willingness to teach others in similar line of work is very commendable .God bless you richly.
I just want to give you a shout out about how much I appreciate your videos and have used your tips and know how in my own DIY home projects. Keep up the great work.
absolute passion and perfection!! No matter what or how you do anything, there will always be someone hating. I know you sleep well at night. Thanks for the video
"hating"? Really? Define hating...
As a painter I love to see this kind of work lol
Pride in workmanship really stands out! Excellent tutorial, one that I'll remember for sure. It's obvious from the neighborhood that top professionals are hired. Your craftsmanship is a great example of that.
Wow, fantastic tips here, thanks for posting ! Adding the block for support is a great insurance to the joint. Also didn't realize how much further you need to take the sanding on the joint ...very impressive !
You’re like the Bob Ross of Trim Carpentry... keep up the great content.
Not sure why this comment does not have thousands of likes. Simply hilarious!
@@Iamk2jones thanks... 😂
Awesome workmanship, thanks for sharing your knowledge.
thanks!
@@FinishCarpentryTV I am a finish carpenter for 45 yrs. Everything in your video, othe video
Every thing in your video, except for the chemicals, i was taught 40 years ago. Keep the tradition!
OUTSTANDING!
Thank you for posting. I really appreciate your attention to detail. You didn’t leave out the basics….which is very good for me.
Sir, you make me want to get into the profession and I don't even know how to begin to start. It's obvious that you are a professional at what you do and you take great pride in your work!
little details make all the difference.great job!
they sure do. thanks a lot
FINALLY! A video done right. Not too much banter to go with the actual instruction of the video. I enjoyed it a LOT. Thanks and I look forward to future vids.
Great instructional video. As a handyman, I appreciate these tips to help me do a better job and save time! The laser tape is something I've thought about often, but I can see how super helpful it would be in these situations!
Thank you for the quality of video as well as the level of detail and knowledge you share. I recently acquired approximately 200 Pieces of 5-8 ft crown molding for free. Your videos will help our house look amazing!!! Thank you!
It's always very comforting to see that not all contractors are created equal, and even more satisfying to see that the Younger Generations are not only about Quantity but Quality. Great job Young Man!!
Keep up the great technics, and thanks for sharing your knowledge.
What video are you watching
You are an excellent tutor
thanks a lot. i try to keep it simple
Its working. You have a knack for presenting.
I used this on a house full of crown, including the 22.5 miter, and I'm here to tell ya it makes the best joints. Many thanks brother for all the tips, you've definitely made me a better trim carpenter.
you're the teacher I always wanted during my carpentry apprenticeship.
14:12 : “Can’t see the line, can you Russ? Nope!”
14:22 :Even he’s crying as he looks at that perfection!
Awesome video and talent brother!
Just started watching your videos. Kudos for an impeccable work ethic. I have been building and remodeling houses for over 30 years and love that no matter how old you are or how long you have been at your craft there is still more to learn. Also love seeing the young people involved in the trades!! What is the glue and activator and where do you get it? Awesome job and thanks for the knowledge!!
You're the man. So many tricks I'm excited to use. Doing a baseboard job this weekend...done a lot before.....but cant wait to employ your teachings. Keep it up.....we're watching...and learning!
Great job my friend, your patience to perfect this is really the key here. All my years in the trades was about trying to get it done quicker, which is fine if you've spent the time to perfect your work, but it can also lead to a job your not proud of. You can always do it better.
This is what I do for a living and I felt in love with his confidence and nice job he does
Man I'm so glad I came across your channel I'm new to remodeling and I want to do the best job I can. Your vids are awesome
As a painter for 30+ years I've never had any finish carpenters do that good of work. They always left it for us to fix!
Agreed
Yea. I've seen really bad "professional" installations.
Great work and great instruction! The eagerness to share our knowledge is a sign of a true craftsman and steward of his craft.
Beautiful work. Attention to detail is what it takes and that is the best I’ve ever seen. I don’t do this for a living I just do DIY stuff and I’ve never done crown molding because it’s just bugs me don’t know what I’m doing. Those people are lucky to have someone like you working for them
Thank you so much for sharing. I’m just a guy trying to make my little house look nice for my wife and kids. Your advice and the time you take to explain the reasons behind what you are doing are much appreciated. Thank you for your time.
Hope your doin good bud
Love that working bench......no dirt or scratches on the molding surfaces ....
tony27ortiz
....Pretty hard to have a work surface that long in the field that's level. He laid it down gently and didn't grind it, besides, when he's finished; it will look perfect. I'm sure he's probably forgotten more than you know about woodworking.
Excellent way to deal with the scarf joint! I never thought of doing it that way. I used to use a little domino if the trim was thick enough and used a 45 degree cut. Your method with the backer glued in and using the DAP spackling is a good idea. Have to try that this week.
Keep the great videos coming!
Ron
You do quality work. It’s really nice to see someone take so much pride in their work.
Great tips. I love the new intro logo splash.
thanks!
no. haha. it's my company. I just get the money that's left over at the end of each job. after paying my employee, materials, paint, diesel, tolls for driving. then my wife takes the rest. haha
Good questions Ken, but my bet is that he's experienced and capable enough to do the jobs in not much more time than those that don't put out this level of quality. Once you devote yourself to doing it right, make a habit out of it and make it routine it becomes second nature and it's hard to fathom taking the shortcuts. Once it's routine you just jump in and get it done. So now you can put in competitive bids, still have pride in craftsmanship and homeowner admiration landing you a steady flow of work. Once the word of mouth and reputation kick in, you can then start to charge a deservant price and you're making a living.
It's helps to actually nail it into the studs in the walls and trusses in the ceiling then just where ever. Plus less holes to fill
Careful with the nail gun. There is electrical wires and plumbing in the wall. Predominantly between the studs. Thanks for taking the time to share.
Not true- if you are doing paint grade and know how to use caulking and make it tight it doesn’t matter if you get studs
@@adrianitis3750 the concern is more toward damaging utilities in the wall spaces. It happens quite often. Sometimes a nail will puncture, but seal a plumbing pipe only to start leaking months or years later causing significant water damage inside the walls.
@@premierreefsmn they are most likely using inch or inch and a quarter Brad's which with this thickness of crown molding, it will barely go through the back of the drywall. They're relying on crossaction anchoring to hold the crown in place pushing against drywall down and towards the wall on each side of the crown.
Agreed
Just wanted to add a comment here. I tried the method shown here with great results. Your videos have provided the direction I needed to install crown at my daughter house. It was a comedy of errors at the beginning but I just kept on working at it and everything got better as I gained some confidence. And while the results have been terrific, building the skills has been the real reward. I would have never tried this without your channel. So, a big thanks to you. Very cool stuff.
You are truly such a great instructor, and share all the information...we really appreciate your generosity!
Dude, that was great content, I'm not a big fan of videos over 10 minutes long but I've seen one of your videos and was curious to see what you had in this one, excellent content! Good job 👏🏽 buddy.
Lol so many nails, your painter must love you.
He said they do the painting themselves. I wondered the same thing because if I will be followed by a paint crew then I would not fill the joints or nailheads, that's the responsibility of the painter. I just hang the trim, set the nails and get out. When you're doing the whole thing yourself it makes sense to do as much on a workbench as possible before hanging the molding. I use the same saw setup he does but I have a portable 12 foot bench to do the joining on (I am too old to work off the floor ; ) ). Whenever possible I will put the first coat of paint on before hanging the trim. That way I can spray the first coat and the last coat of paint is brushed on and goes pretty fast because you don't need to get close to the edges with the paint brush.
Man I thought I was going to learn something but I seriously learned something! Your a top notch pro man. Thanks for the quality advice
You do a great job young man, very nice to see someone take pride in there work. It shows you care. You will be very successful in life.