Video není dostupné.
Omlouváme se.
How to replace Samsung Dryer Belt, Idler Pulley, and Rollers. Diagnose Dryer will not start or turn.
Vložit
- čas přidán 13. 10. 2022
- Samsung Model Number shown: DV210AEW/XAA but should work for most Samsung models!
Let me know if you have any questions in the comments!
Link to kit on Amazon (not sponsored): smile.amazon.c...
you are a lifesaver my friend thank you so much for this perfectly explained video !
Excellent video. I definitely needed two people to get that belt on. Little trick. One person hold the belt on the roller, the other shimmy on the belt.
Yes, after a few failed attempts myself, it would have been a lot easier to do with two people.
Thanks for the great video! Just finished replacing my belt, idler pulley & rollers with the same kit you had, and it works perfect now. Getting those rear rollers off was a bit of a pain, and I had an extra set of hands for the belt/drum replacement...that must have been an exercise in patience by yourself. Thanks again!
Glad I could help! Yes those were a pain!
Thanks for the outstanding video. My son’s dryer wouldn’t start and found the belt was broken. We found your video and replaced those kit parts. Took us 2 hours plus an hour to run to Home Depot to p/u a new vent hose. It runs like new again thanks to you 😊. Also thanks for mentioning the 17mm wrench. I bought one before my son and I started the repair. For just the appliance repair company to come out and give an estimate was $120.00 dollars which we didn’t entertain. 4:16 foot
I'm so glad that I could help! It's these comments that keep me going. They probably would have charged much more than that after parts markup and labor. Sorry about the foot!
Those white plastic triangle clips on my non-Samsung dryer kept the rollers on the axels. You shouldn't have to remove the axel to remove the rollers. I am fixing a neighbor's dryer tomorrow and will know for sure if the axels need removed to change rollers.
Thanks! Let me know!
Thanks just changed my belt. Your instructions were right on the money. The belt and drum was a little aggravating. Two people makes it much easier.
Glad I could help! Yes, it would be easier with two people for sure!
I just changed my belt today following step by step what you did. Thank you very much for the video! You save me hundreds of dollars.
I'm so glad I could help! It's feedback like this motivates me to keep making these!
Very helpful step by step guide with great video support. There is a way to set the belt by one person, a little hard but possible if you put the belt on the drum first and instead of fixing the drum with front panel put something in between the bottom of the drum and the top of the motor box, just to make the drum stay as much as possible in its working position. This way you may be able to use both hands to set belt on the motor shaft and pull up the roller high enough to get the belt under it.
The video is great anyway, very helpful, thank you!
Thanks man! Glad I could help!
Thank you so much! I've never taken a dryer apart but was able to successfully change the belt.
I'm so glad that I could help!
Thank you. My sprung came off the pulley. Because you showed so much of the process I was able to diagnose. It did not take my 15 minutes. More like 1 hr because I had to take it apart twice
I'm glad you got it fixed and that I could help!
Well i was going to either pay for service or attempt this myself but now nope! Just going to get a new unit. This was helpful, thanks. Not going through all this on a 10 year old dryer to have the heater fail a few years later and do all the tear down again.
Good luck! Don't buy another Samsung!
@@MicahMartinDIY Turns out somehow a cloth made it into the blower motor, lol.
Thanks man! It was helpful.
No problem! Good to hear that I could help!
thanks for the video,,, just helped me fix my dryer today
That's so cool! I love helping people save money!
Thank you so much! Saved me so much money!
I'm glad you were able to do it! This is exactly why I make these videos!
One year later how is everything working? There are a number of bad reviews about the wheels coming apart on Amazon.
So far so good, and we do a decent amount of laundry!
Great video
Thanks! Glad to help!
My girlfriends dryer makes noise and dont spin, spin cycle timer works and count down, any idea? Its a samsung dve52m8650v/a3
I'm sorry, I am no appliance expert, I just share my experience based on things that I encounter, however, it sounds like a drive motor or drive belt issue.
Great and helpful content brother thank you very much
You're welcome! Glad I could help!
Thanks man. Replacing those today
Good luck! I'm sure you will get it working.
Any idea why the idler pulley screw just keeps spinning and not come out?
It must be stripped. This is cheap aluminum constriuction. You may have to find a way to rip it out of there and replace it with a larger size screw.
Thank you!
You're welcome!
a little miffed you skipped the part on how you disconnected that door closed switch 😅 that thing was annoying! other than that this video was a great walkthrough 👍
I only needed to replace belt and managed to get it into place just loosening the front and snaking it around the drum without having to remove drum.
Sorry about that. I'm glad you got it fixed!
Before doing anything , even opening the top. Please please disconnect dryer from wall power
Absolutely!
Thank you so much!!!
You made this repair super easy!!
You are the man sir!!
Glad to help! Love helping people save money!
12:20 😂😂😂😂😂 nooope!
Haha!
Same as no need to remove door or axles 😂😂😂😂
@@huejass1325 exactly
I never heard mention of shutting power off to the appliance. Shut the appropriate breaker switch at the panel, try to start the dryer and if no lights on the panel, pull the cord from the outlet.
Or you could just unplug it, which is most likely what I meant.