I have a 96 and around 180k it was shifting bad in first and second so I dropped the pan got a solenoid kit and a filter tested the solenoids with ohms and found out that one was bad changed them all out because I was already in there anyway and it runs like a champ now that was about 40k miles ago
Thanks for the valuable info. I have a hard clunk when shifting to drive only. Checked the u joints, fluid level, cleaned the nss, new transmission mount and engine mounts are all fine. Any help.
1995 JEEP 2WD.
HOWDY, THANK YOU
Hey man, I have a 01 Cherokee and I'm getting a P0740 code, but the transmission shifts fine. runs great, any advice?
I have a 96 and around 180k it was shifting bad in first and second so I dropped the pan got a solenoid kit and a filter tested the solenoids with ohms and found out that one was bad changed them all out because I was already in there anyway and it runs like a champ now that was about 40k miles ago
What is the part number for the rear output shaft seal for the aw4
Thanks for the valuable info. I have a hard clunk when shifting to drive only. Checked the u joints, fluid level, cleaned the nss, new transmission mount and engine mounts are all fine. Any help.
I have a code p0122 which is for the tps that I’m waiting to be shipped soon but i don’t think it is causing that clunk when shifting to Drive.
Any update dude? Same issue on mine when stopped, shifting into Drive is harsh
I have a 92 mines don't want to reverse need some help
If it isn't low on fluid then it's broke. No other reason one would lose reverse unfortunately.
I GOT A NO BUS CODE..AND TRANSMISSION NOT SHIFTING PROPERLY..WHEN I unplugged the tcm gauges work..and no bus disappeared..
Sounds like the TCM is bad.
@@tacticalrepair Simple swap ? With serial number
@@ari1234.Should be simple plug and play.
worked fine ..then grinds in park n nuetral ...? 2 20 2024