Thank you, you just saved me a service call. I bought a house with a generator and while checking the battery and cleaning the unit last week, must have pulled the wiring harness for the stepper motor loose. While it worked for a minute when I tested it manually after cleaning, it gave an 1100 Overcrank error on its next weekly exercise. Sure enough, the stepper motor connector was only half-way in. (I assume it vibrated loose during my test. It's not a tight fit.) This was not mentioned in any other video as a possible cause of the Overcrank error. Thanks again for sharing your knowledge.
Thank you, you just saved me a service call. I bought a house with a generator and while checking the battery and cleaning the unit last week, must have pulled the wiring harness for the stepper motor loose. While it worked for a minute when I tested it manually after cleaning, it gave an 1100 Overcrank error on its next weekly exercise. Sure enough, the stepper motor connector was only half-way in. (I assume it vibrated loose during my test. It's not a tight fit.) This was not mentioned in any other video as a possible cause of the Overcrank error. Thanks again for sharing your knowledge.
@@mbslater your very welcome. Please support and subscribe to our channel if you haven’t already. Thank you
Should be zip tied down. Error on the manufacturer part. Love my Kohler!
@@mylesprior4985 yes, I agree. They should have something supporting those wires. Most of the other ones are secured.