Underglow Installation | Tesla firewall | Accessory Power

Easy Underglow Install for your Tesla Model Y! Suzco Underglow installation on a Tesla Model Y. This video goes through 3 main techniques: 1) How to get through the Tesla firewall, 2) How to power your accessories by installing a switch, and 3) How to go through the frunk to access underneath the car. I hope this helps so you can install an underglow to your Tesla.
Hide your wires with a clean install. And don't plug it into your 12V socket. Hardwire it to a switch so you can turn it on and off.
Don't void your warranty by connecting it to the 12V battery or the wrong wires. Better yet, put it on a switch and a fuse.
Suzco Underglow Lights - amzn.to/3MSZ8ux
(buy 2 sets)
Cable Clips, adhesive holder - amzn.to/3quphbH
Grease and Wax Remover - amzn.to/3J06NWN
Tools:
Multimeter - amzn.to/3i0Zxzy
Here's a good trim tool set - amzn.to/3Gsmsxo
Should be in everyone's toolbox:
Torx 20 bit - amzn.to/3YnHRxO
We use Posi Taps on all our cars - amzn.to/3WOp3a7
because it fits into tight spaces, is the most secure and won't come loose.
mini-fuse holder - amzn.to/3vqwZCG
spade connectors - amzn.to/3IeqlXQ
Wire stripper - amzn.to/3hWMPBW
silicone wires 20AWG - amzn.to/3GqzbQS
silicone wires set - amzn.to/3WSf2Ja
=====================================================
🡇 CHECK OUT OUR OTHER VIDEOS:
➤ • Don't void your warran...
➤ • Tesla TV Screens | 12v...
➤ • Tesla 2022 vs 2023 | D...
=====================================================
IF YOU LIKE THIS VIDEO, PLEASE HIT THE 👍THUMBS UP THE BUTTON, SHARE AND WE WILL BE WONDERING IF YOU DECIDE TO 🙌SUBSCRIBE 🙌 TO OUR CHANNEL:
🙌SUBSCRIBE HERE 🡇
➤ / @teslamods
🔊Disclaimer: This video/content and the resources on the CZcams Channel is only for our audience's entertainment and or educational and informational purpose only.
#teslamodely #teslainstallation #underglow

[@gabrielgarcia8018]

I’m gonna be installing a train horn in my frunk and put an air compressor in the trunk. I’ve been looking for ways to route the air line into the frunk and this video helped me! Thanks!

[@Eminem.doingr]

The Tesla firewall can be a bit intimidating, but this video does a great job of explaining how to navigate it.

[@Tuana_bne]

This tutorial is so helpful! I had no idea how easy it was to install underglow on my Tesla.❤️

[@m.zeenalmallouk9973]

Great tip on using a fuse tap to connect the underglow to the accessory power! That's definitely going to make things easier.

[@teslamods]

yeah it's a game changer! esp in hard to reach places like installing a car alarm on any car.

[@huseyinkafadar818]

Thank you for sharing this tutorial!

[@m.jamesnewman7581]

All I needed was the firewall hole. Why wouldn't you connect to the 12v under the hood instead of at the power module? You could make an independent circuit with a fuse at the battery. Seems like you took the long road. And how you getting to the fuse in the console if it blows, plus an unnecessary extra under the hood? One at the power connection is enough. Easy removal later. Bonus; your key never gets disconnected.

[@jungle3742]

Hey! I got a question, can I still use the 12v accessory plug after installing it?

[@jungle3742]

Also what fuse do you use?

[@teslamods]

yes, that's the point. My 12v accessory plug is always available for something else. But for many people, the radar detector takes away that spot. I don't like that. I want it open for any random thing.

[@teslamods]

I usually use a 10A fuse. it's good for most things on the Tesla