0060 - PACLOCK UCS-10A Job Box Lock
Vložit
- čas přidán 9. 05. 2022
- PACLOCK UCS-10A - amzn.to/3wfFEIo
KIXPICKS Custom Lock Picks Instagram - bit.ly/38hi8Tf
KIXPICKS CZcams - bit.ly/3M8fGNx
Custom Dick Pick - bit.ly/3P52rPw
Peterson Pry Bars - bit.ly/3L6uCdI
Thank you KixPicks for the awesome tool!
The PACLOCK UCS-10A is a purpose-built padlock for job boxes and performs its job wonderfully. Its use isn't restricted to just tool boxes however, you could absolutely use this lock like any other padlock.
It has a hardened STAINLESS steel shackle which not only provides cut resistance but weather resistance as well...something most other locks make you choose between.
The lock has 6 pins all of which are stainless steel which provides greater protection against drilling and an overall longer lifespan of the cylinder considering the pins will simply just last longer compared to softer brass pins.
Five pins are security pins, one is standard. Having at least one standard pin helps stabilize the core. Some locks use all security pins for the sake of looking good on paper but it actually causes the core to be loose (especially if they use all spools). There are locks that have all security pins and this isn't an issue, really it comes down to the quality of machining.
There's room for improvement with type of security pins used: having serrated key pins or serrated spools would make picking a little more challenging. Realistically this a minor detail in the overall security of the lock considering if someone has the skillset to pick this lock as is, they know what they're doing and will probably still get in.
The plug design fits over the actuator protecting against bypass attacks.
The plug retainer bolt design is a nice change from c clips...not really a big deal if you're not taking the locks apart but I think it has a lot of potential as an anti-pick / bump feature especially if it was relocated toward the middle or front of the lock or another one added in etc...
The retainer bolt going directly into the core means the lock can't be opened by prying off a security plate...because there is none.
The silicone gasket / weather seal one of the best I've seen. Usually these are made of rubber and they either don't stay in place or crack and fall apart or even just fall off...sometimes right out of the package. PACLOCK added serrated grooves on the lock and "nubbins" on their seal so it actually stays in place. The washer & bolt allow it to freely swing out of the way when operating the lock and easily be removed or replaced if needed. It just works.
This lock is UCS compatible. If you have multiple UCS compatible locks you can quickly and easily swap the cores so that they are all keyed alike.
PACLOCK sells a kit of 5 cylinders (keyed alike, differently, or however you want) that can be used to do this: amzn.to/3l4mQ9v
If you loose a key, this also means you can rekey all of your locks in a matter of minutes instead of spending $$$ on new ones.
PACLOCK put a lot of attention to detail in designing this lock and I think it paid off. Overall I think it's a winner and a great overall padlock that provides a lot of value at a very reasonable price (I paid $36 which is currently the price on Amazon at the time of this review).
Recommended Beginner Kit: bit.ly/3rVGngI
Recommended Locks: bit.ly/3M5pGar
Music: Epidemic Sound - bit.ly/3GOF5Zd
Affiliate Disclaimer: I link everything used or mentioned in my videos both for your convenience and to monetize my content. When possible I use affiliate links to do this (usually Amazon or eBay). There is no bias in what gets linked; my intent is to provide value to you so everything gets linked whether or not I earn anything from it.
Follow me on
TikTok: bit.ly/3oRjXv9
Instagram: bit.ly/3LyXDQL - Jak na to + styl
![[927] The Strongest Padlock in the World (Seriously) - Squire Stronghold SS100CS](http://i.ytimg.com/vi/nwgwCmh7SGg/mqdefault.jpg)
![[927] The Strongest Padlock in the World (Seriously) — Squire Stronghold SS100CS](/img/tr.png)
![[636] Bowley Lock Analysis and Update](http://i.ytimg.com/vi/qV8QKZNFxLw/mqdefault.jpg)
![tattoo printer tutorial[제품단순선물]](http://i.ytimg.com/vi/g40_GwEJak0/mqdefault.jpg)
![[1283] A Lock Picking Game Changer?](/img/n.gif)
Custom pick was made by KixPicks, be sure to drop some comments on his CZcams channel so he posts more videos 😏: bit.ly/3ypzTu7
Can you pick the alpha lock?????
what about the dicc pick?
When McNally gives praise to a lock, multiple praises in fact, while bothering to explain and actually make a tutorial, is how you know that you've succeeded in life if your a lock maker
I adore this comment.
@@WhiskeyAlphaRomeoMA ty
PacLocks are awesome. Not only is the average PacLock more pick resistant than every Master Lock combined, but the company also has a great relationship with the lockpicking hobby, and frequently turns to them for feedback on how to improve their designs!
When Paclock showed up I was "oh shit, please don't be like Master lock".....
And now every shitbag in existence can easily look up a tutorial on how to open this specific lock, because who fucking cares about about being a useful contributor to society when you can chase clout on CZcams.
I am so SO confused,but i love it
Same
Don’t you love dick picks?
I feel ya
It's lock porn. You wouldn't understand. McNally gets aggressive
Dude great video do more long form tutorials like this ur killing it
I had to take a break but I'm back ;)
Yeah longer, harder, and slower, take your time, we like the foreplay.
More information about the lock and links to everything provided in the description
Please return to your longform content they're more educational than the shorts and also feel like a fever dream 🙏
Man the fact that it took this YOU as long as it did is a huge selling ppoint 😅
Where can I get the dick pick?
"The d*ck pick that hits all the right areas " had me on the floor 😂
Love it! I'm honored to be in one of your videos especially a positive one hehe and your first long video, amazing stuff as always! Keep it up and wish you all the success!
Oh my! I found a new subscription finally
After years of lock picking in Bethesda games, your videos really make me want to take it up as a hobby. Love the short and long video formats!
It doesn't suck that its a long video. You gave some actually useful advice and recomended people a lock that will do its job. For this, we thank you.
You made me come up with a evil plan.
I learn to pick a lock and then I'll pick every love lock on the nearest bridges
Make sure you use one of the dick-picks so you know it was "your" member that ruined their marriages! Brilliantly evil!
You're a mad man, do you need any assistance?
Then you already knew what did he next 😂😅
@@hariharpuri1362 then you yeet all of them in the water below
@@mezbats6797 screw that, sell em for scrap!
McNally makes high quality videos and thirst traps for lock. LPL just makes you question why a lot of locks are bad
the fact that this lock is getting praise means that it is a extremely good lock
It's really unfortunate that youtube prefers your shorts over videos like these, though another part of it might be because the algorithm recommends less portrait resolution videos to desktop users than mobile users. Regardless I look forward to what more you bring to the table into the future, amazing work!
1:00 THE WHAT?!!😂😂
Being new to the channel, I didn't know you ever praised any lock. Seeing a lock not get passive aggressively violated and thrown into the abyss was a welcomed surprise. I hope to see another lock get the same treatment one day
The plow cam 🤣
The smooth jazz was classic
I switched all my locks to these like 3-4 years ago. Every video I stumble upon with them reinforces that it was a good idea.
I think this is his best video for a lot of people to understand this man.
I love to see how one can actually start to think more about the locks they buy and what they actually do
I really enjoy seeing Paclock commenting on LPL's videos on their locks, hoping they hop in here too!
I just have to say, I love using combo rake hook type picks, and for the longest time the Medusa was my first go to on the job. But after I found the dick-pick, it is now my first pick I pull out for residential/commercial entry. It just works so well, that I very rarely have to use any other pick in the field. Who woulda thought that something that obviously was created in humor would be so effective as an actual entry tool! And little old perverted ladies love it when they notice, and I sometimes tell them it's custom made to be actual size! Lmfao! I love it!
Great video! As a user of Paclock's products for several years, I can tell you that their customer service is at least as good as their fine products. It's refreshing to find a company across the country from me that actually cares about my small business. 100% recommend!
Remember kids, for every masterlock, there is a masterkey, which sometimes is just another masterlock.
i know nothing about the lock picking culture but watching your videos is so satisfying and funny at the same time!
Usually watch LPL. The production quality here is nuts
love the long form, even if its less economical
I got myself a beginner lock picking set from covert tools with the clear practice lock and I watched one of your videos to get a vague idea what to do. Bam, five minutes I picked my first lock. Obviously it being clear gives me an advantage, but its giving me some understanding of how it works. I've put a bit of painters tape over it to keep from seeing the pins, and while its taking me a while to learn by feel and listening I've opened it once so far blind.
Thanks so much for the helpful video!
*Love* the longer format btw! ❤
This video was phenomenal! I really enjoyed it!
I like the videos you're passionate about. It's confusing, but nerding out so we don't have to is gonna help somebody.
Clean videos. Well narrated and crystal clear imagery.
I came here from the link you provider in the comment under one of the shorts. It's phenomenal, I would be happy to see more videos with so much info, it was very entertaining. And educational 🙂
At first i was convinced McNally was trying to extend the length of the video due to how fast he violated the lock. But its also nice to see a tutorial too!
So I just discovered this channel recently…..this has to be the best channel on this platform.
Fantastic video
Thanks for watching!
your flair for the dramatics is inspirational
super polished video. fantastic production value.
This channel is incredible
I got drawn in by your shorts. I've played a bit with picking. This video is amazing. I had to pause and back up a number of times to see what you said was happening. That kind of breakdown helps a lot. I like your long form videos cuz a lot happens, and you explain it well. If you made a "So you are new. These are the basics you need to know first." that would be amazing. Mostly so I can tell where the benchmark is without finding someone who knows how to do it irl.
I think McNally will be interested in the 4th one,because to that man, nothing is ever truly unpickable
I didn't know you made long form videos, I love it
Love it. You are creatinng wonderful content!
Great video! I bought the replacement cylinders package keyed different and so far I've managed to get 2 open. Honestly think that was pure luck as I'm not really a skilled picker yet. But I have fun trying and these are quite difficult, for me at least, for now.
I like the knife throw at Barnacules Nerdgasm face pic at 0:50 😂😂😂 looks like he was begging for it
Best lock picking video I've ever seen.
WHY DOESN'T THIS HAVE MORE LIKES?? 🤔
The way you speed pick locks looks like a reload animation
I absolutely love that you're posting again. Keep it up :)
Learned something today. Never focused on the torque wrench before to thickness. I will now.
THIS WAS AWESOME!!! Thank you!!!
You had me at... well you know. Thanks huni❤
When the master of unauthorized entry picks a lock but praises it for its design and protections you know its good.
This type of video is useful but underappreciated
Love the supercut compilation of ‘impalements’
DIDN'T WATCH A YEAR AGO WHEN BOSNIAN BILL & LOCK PICKING LAWYER WATCHED A LOT, THEN WHEN BILL STEPPED AWAY, YOU SIT THROUGH A PICK THEN DISSECTION OF A LOCK TO LEARN MORE ABOUT THE DIFFERENT STUFF THAT CAN GO IN A LOCK! AND I MADE THE MRS WONDER WHAT'S GETTING A LAUGH A MINUTE IN YOUR VID I HAD TO REWIND AND SCREENSHOT OF THE PINK IN BETWEEN THE 2 'WOOD' PICKS!
You are awesome !
long format is great
That pick is lovely like when u got it love the channel others try to pick yours apart
I'm surprised how relevant and practical this is.....
I honestly watch your vids like asmr, your voice is>>>>
Please return to your longform content they're more educational than the shorts and also feel like a fever dream 🙏
4:55 That's a brilliant idea. And seems feasible to implement.
Hi. I just found you. I think you're outstanding. Please keep up the light-heartedness and fun.
Also, screw master lock.
1 minute into this video, SUBSCRIBED 💥
I definitely need more videos like this! Absolutely awesome from start to finish!
AY
THIS IS SICK
Awesome video!
I can testify that a high quality dicpick can open the most difficult legs... I mean locks. Yeah, locks.
1:30 this is super useful info!!!! :O
I was always wondering why all these ultra precise thickness variations!
I loooved this video. super interesting. thanks
The ultimate Impaler
Love the video bro
Amazing video, dude !
Thank you!
Great job!
Thank you!
Keep up the good work.
I. Learned. A. Lot.
HEY! PACLOCK!!!
Y'ALL NEED TO PONY UP SOME SCRATCH FOR THIS MAN!!!
HE DID Y'ALL A SOLID!
🧐
I had no idea some locks were so insane
any time i see "plow cam" come up i know i'm in for a good time.
wait.
Just sitting here on the john I enjoyed every second of this video
Found you on TikTok and decided on this lock (from your list of decent locks) to replace an M5 pos that I was able to noob and luck my way into courtesy of LPL's Genesis set. Master is absolute trash.
Thanks for the awesome videos.
Shrimp and fries Devil Dick.
Brooo.. the plow cam 🤣🤣
Bro his speed of lockpicking is literally way faster than using key normally.
Hey, can you pick a tube lock? The type that has a cylinder shaped key with ridges on the end? Can you please make a video doing one?
Can't tell if ad or truly just wanted to make this comedy masterpiece while taking every opportunity to dis on master-disappointment. Can say this definitely took him much longer to pick than most of the others he has showcased
The baby making music truly makes it a masterpiece. But if I ordered that pick, does it come with the background music every time I pull it out? Or is that sold separately?
That do be a masterpiece tho
would love a version of this video not in portrait mode but still, this is a good video
Awesome
Hilarious and informative.
Lmao the Steven he emotional damage clip playing in the foreground was hilarious
Could you try your hands on a Manutan lock? My job has a lock with no key and I kinda wanna try my hands on it
Plow cam. Lol.
I would like to see a McNally vs LockPickingLawyer on April 1st.
at this point i am just curious what is the lock he use
padlock: you can't crack me.
McNally: speed run?
padlock: Wait wha-
You claim to include all tools in the video in the description, but I don't see one for those leather gloves.
Do gloves matter style or company wise? What ones are being used in here or your other videos :)
Please do 1 video on locks from India ❤
If McNally can't fuck your lock, it's a decent lock.
If McNally has to pick slowly with the slow music, it's a good lock.
If McNally starts talking about the lock's internal features, it's a damn good lock.
If McNally has to make a video, not a short. It's a godly lock.