How to use 3d pen to make 3d things - Strategy
Vložit
- čas přidán 10. 05. 2024
- Part 3 of the "Complete beginners guide to getting started with your 3d pen" explains the four types of strategies to use in going from making 2d things to making 3d things with your 3d pen. Great information for artists, STEM teachers, art teachers, homeschooling parents, crafters, and all 3D pen enthusiasts.
CONTENTS:
0:00 Introduction
1:52 Four types of strategies
2:20 Joining intersecting planes
2:28 Corners - two ways
3:32 Radiating planes
5:00 Two parallel planes
5:40 Multiple parallel planes
6:24 The coil method
7:07 Contour lifting
8:23 Working on curved surfaces
9:29 Working over armatures
10:33 Heat forming
Music: Joshua Spacht
Other VITAL info:
Templates available at the 3DPenDen Etsy store:
www.etsy.com/shop/3DPenDen?re...
Related videos:
Beginners guide to 3D pen use - part 1:
• Beginners guide to 3D ...
Beginners guide to 3D pen use - part 2 - Bridging
• Beginners guide to 3D ...
Advice on work surfaces:
Best work surface for 3d pen
• Best work surface for ...
7 things you want from your 3d pen work surface
• 7 things you want from...
Featured projects:
Making spheres with 3d pen - Large sphere construction
• Making spheres with 3d...
How to make a bottle with a 3d pen
• How to make a bottle w...
The quest for the holy grail with 3D pen
• The quest for the holy...
How to make a sphere with 3d pen part 2
• How to make a sphere w...
Featured techniques: Contour lifting
How to make a cone with a 3D pen - Introduction to Contour Lifting
• How to make a cone wit...
How to make a sphere with 3d pen part 1
• How to make a sphere w...
DIY equipment making for the above projects:
DIY circle maker for 3d pen
• DIY circle maker for 3...
DIY turntable tool for 3D pen work
• DIY turntable tool for...
DIY tool for 3D pen - Spacers
• DIY tool for 3D pen - ...
TOOLS & MATERIALS:
Basic tools for 3d pen use:
Pen: MYNT3D amzn.to/3I9WVre
Filament: OVERTURE PLA Plus (PLA+) 1.75mm amzn.to/3v1LkXl
HATCHBOX PLA 1.75mm amzn.to/3JBRWQ5
Surface: Clear Acrylic Plexiglass 12” x 12” 1/8” Thick (3mm) amzn.to/3H3rvBo
KRYLON Clear acrylic matt spray amzn.to/35c6WWd
Filament cutters: Wire/filament cutter pliers amzn.to/3IkTe1S
Fiskars scissors amzn.to/3hi76Ox
Fiskars scissor sharpener amzn.to/3pY77fk
Release tools: Scraper knife amzn.to/3MHbZiA
Palette knife set amzn.to/3vTDRKt
Adhesives for stabilization: Blue painters tape amzn.to/3ME6EIN
Mounting putty amzn.to/3vU5ent
Kneaded eraser amzn.to/3t3BKlv
Other helpful tools:
3Dmate Base - Transparent 3D Pen Mat 18 x 12 with basic geometric shapes amzn.to/3I4HArQ
3d pen templates: 3DPenDen | Etsy
www.etsy.com/shop/3DPenDen?re...
DISCLAIMER: “Tools and Materials” part of the description above contains affiliate links. My motivation is to share tools and materials that will work for you. I do receive a small commission (at no cost to you) when you click through one the links. Your purchase supports this channel and allows me to continue to make videos like this. Thank you!
You are the best 3D pen instructor I have found on CZcams for 👍👍👍.
Lots of love from India
Wow, thank you!
Your videos are really soothing to look at!
Thanks. Good to know. :)
I think you're the master of the 3d pen! So cool!!
Thanks. :)
The new music is so energizing ... love it!
Glad you like it. I do too.
Merci pour ce superbe tuto , un Bonjour de France
Merci beaucoup. :)
I haven't subscribed to a channel in a long time. You earned mine.
Nice to hear that. Thanks. :)
I love your channel. Greetings from Colombia
I love how all the 3d pen enthusiasts can connect now from wherever.
3d Pen, on another level...
Very nice...
Thank you very much! :)
this was so helpfull!
I am so glad. That is the point. :)
Bravo c’est magnifique, je ne comprends malheureusement pas vos explications, bonjour admiratif d’une Française
Merci. Si vous regardez des vidéos sur CZcams si vous cliquez sur l'icône "cc" cela fait apparaître les sous-titres puis cliquez sur paramètres (la petite icône d'engrenage) cliquez sur "sous-titres" et "traduction automatique" et cela vous donnera un menu dans quelle langue vous aimeriez qu'il soit traduit. Le français est là. Ce n’est pas parfait, certains éléments sont confus, mais cela aide. Bonne chance.
Top
:)
Hi, whta do you use for your figures, ABS or APL?, thanks
I use PLA for everything
👍🏻👍🏻👍🏻
Thanks.
Hi what pen do you use?
Mostly Mynt Pro
I actually want to just get a 2D shape. My pen feels impossible to use, and the filament gets stuck to the side of the pen, making a loop before I can use it properly. I would be glad to get a single line out of it properly, and there aren’t any tutorials for making even a 2D shape.
From what you describe in both of your messages it sounds to me like your work surface is the problem. Watch these two videos and then try again and let me know if that fixed your problem. I almost gave up initially because I was trying to work on non adhesive surface. If the filament can't stick to the surface it will wiggle and/or stick to the nozzle.
Advice on work surfaces:
7 things you want from your 3d pen work surface
czcams.com/video/n9RXEH7BAzA/video.html
Best work surface for 3d pen
czcams.com/video/QP7YsXWvb8M/video.html
Tôi ước mình có giàn bút giống như bạn:)
If you mean the big turntable I have a video on how to make that.
czcams.com/video/utRvR2c5a1k/video.html
or if you want a smaller one
czcams.com/video/GwGgmP68MBo/video.html
6:36 - LMAO - Sanago reference?
Yes and Yunho and Hoo's mini world and few others.
@@3DPENDEN I have been meaning to get to those...
Patience of a South Korean? Are you referring to someone or something in particular?
Yes. There is a 3d pen community in South Korea that does amazing things.