how to change front and rear pads on Suzuki GSX-R 750 600 1000 2001 2002 2003
Vložit
- čas přidán 7. 09. 2024
- WARNING!!! UPDATE: I realized after the video I installed the keeper clip on the OUTSIDE of the brake caliper. MAKE SURE THE KEEPER CLIP IS ON THE INSIDE so the pins dont come out! DOH!
____________________
Today I got around to changing the GSXR 1000 project bike front and rear pads. The fronts are easy but the rears are a bit tricky. If you need a set of pads please use the link below we'd really appreciate it!
___________________
SYUU Motorcycle Replacement Front Rear Ceramic Brake Pads Brakes for Suzuki GSXR 600 1997-2003 GSXR 750
amzn.to/37PGi1p (CANADA)
amzn.to/2s93et7 ( USA )
too the point down to earth thank you !
you got it
Tip if gonna bleed brakes anyway take calipers off completely easier to work on a table js
Yes makes total sense.
Next time please put the camera closer to the parts you're changing so we can se the details
very helpful. not many videos of this !
Agreed. Cheers.
21:50 the keeper clip is in the wrong spot, i followed step by step only to have my rear pads weld themselves and catch on fire to the rotor because the clip and pins backed itself out on the outside of the caliper where you had informed us to put it.
@dylanwilliams9779 did you not read the description???? Warning !!!! It's at the top of the video description. I'm sorry to hear that brother. I'm not a mechanic and I did make a mistake. Sorry you suffered.
@@GilbertGardensi didn’t, i had just watched the video and thought i did it right. sucks a lot, i need a whole new caliper, rotor everything just from a simple pad install.
@dylanwilliams9779 yeah I caught it right around when I went to mount the wheel back on I believe. Again sorry buddy .
I have never heard someone say "pecker head" before lol then the amount of times it was said in this video haha
Hahahahahahah😂😂🤣👍 me too good vid though man. Very helpful
Good job my friend
From Tunisia
I took my caliper off and now there a gap between the 12mm bolt and the caliper , I’m
Lost
Fyi I took the front tire off to do the forks and I put it back on but now the brakes won’t go in right
Are you showing yourself or how to change the brake pads?!
little bit of A and little bit of B. I couldnt find much on these old bikes so i figured id record it.
same brakes on the s rad 600 1999 w
Good to know
Is it possible to do this without lifting the bike off the ground?
absolutely. I think I had it lifted because i was removing the forks later.
however a front stand would be helpful