Video

I have a 2011 Mercedes Gl350 likethe one you had andinstalled a catch can but that caused me to loose the engine : let me explain , live in Ottawa region and on a very cold day ( -40C ) an ice plug formed in the catch can piping and crank case pressure went to hell and the engine spilled all of it's oil after it busted the piping and engine locked up 7000Cad later replaced the engine and had to reconnect the dam PCV back , but what i'm doing is simply splitting the recommanded oil change intervals by half so changing oil every 7500Km instead of 15k

You should have used a new O ring seal on cooler. Old one has swelled.Why put old junk back in??

I Thought You had to spray clear while paint wasn’t fully dryed

Y have a garden wich is mostly clay, have grown quite about anything in it and have gotten great results, mostly beans wich have grown very good!

150a?? Dude yeah that's way too big for your circuit protection

Looking at 1 today is a 2018 1500 4x4 6'3 bed with 42k miles for 31k. 1 owner, no recalls, I looked at the NHTSA. I dont tow anything i mostly drive no more than 5k a year in city no hwy since am retired never had a diesel before is this a good idea or go with gas. Am asking help with my decision

I would think you need at least a 5k watt inverter to run a microwave without issues. 1500 would go into protect mode which would be very annoying.

I bought the tools from eBay for £14.00

How do i identify the tensioneer please?

Stopped watching 5 min in once I realized you guys are working in flip flops

I’ve never filled my filters up with oil either. Never had any problems with any of my vehicles n my 08 gmc durmax has over 200K miles…

Thanks for video! Appreciate the information!

So Hustler has admitted they have an issue with the frame design. They sell (but should offer for free ) a beefed up bracket kit to keep the frame from flexing. That's why his mounting bracket is cracked. When that flexing occurs the drive belt fans hit the drive belt , which breaks or derails the belt .

Helpful content, thanks!

I appreciate your video! Thanks for posting! A tip: got a good jump scare at 11:05 I had the volume adjusted for your talking then BAM loud engine running.

Thank you for this video u da man. U still got the bike?

Hey bro i bought 2015 Ecodiesel at 192000. Serviced it yesterday after 5K. Can u pls let me know the things to check on to run smoothly. I would really appreciate ur time.

Hi i just found your video on the 2011 compass and i have a 2012. I have some other things that need to be worked on but nobody seems to know where to find this part. Since you could deal with a compass that is identical to mine, I was thinking you may know the answer or at least be able to lead me to your resource that would have the answer. I'm getting a bad read on a fan motor relay and everybody keeps pointing me to the fuse box, but it's an actual big giant chunky relay and nobody can seem to figure out where it is and so only one of my fans is working and the other one doesn't. My thought was that the relay is on the back of each fan that I cannot find a resource to give me the correct answer. And since you actually have a compass that you work on all the time, I felt you were a good source to ask and hoping that you have the time to answer or or send me a link to the video that you've made that covers the information.lol. I guess I want to know how do I find more of your Jeep compass repair videos not just this one. Or do you guys have a family email that I can email you More questions? Thank you in advance for your hopefully coming response😊

You can get cable glands to put at the entry point through the body, that's what I did. It's a little plastic tunnel that inserts through a hole with threads, then you tighten down the nut on the opposing side to lock it to the metal wall. Then it has another larger nut on the exterior side that you tighten down after the cable is in place and it shortens/tightens down a rubber grommet to water seal the wiring through the wall. I highly recommend. They come in various sizes, I used a bunch of number 10 gauge wires from Lowes instead of a solid single cable, it was just easier to route and deal with with the way I ran it through the firewall in the kick panel area. WI think I used PG 19 or PG22 size. 4x 10 gauges on the positive and another set on the negative.

The music junked another video 👎👎👎💩💩💩😬unbelievable this crap over the tractor?

A piece of worn out T-shirt pressed between socket and nut or bolt head works great for retaining nuts or bolts so they don't fall out, especially SS non-magnetic fasteners. Thank for sharing, was going to come up from underneath 😊

My 3rd gen is performing flawlessly so far with a + 80hp tune, catch can, oil cooler and amsoil coolant/oils so far. I dont tow with it but it does push 42” tires around doing crazy offroading ~ 70% of its miles in my Gladiator. I’ve appreciated learning insights from you im sad to see it go

Yes…The never ending “ maintenance “ is astounding with it. Sub par engineering.

Great video thank you! Dealer wanted $175 🤯

My 104 year old CT beach cottage is balloon framed. I'd have never bought it had I know. The back wall where a back porch was turned into a two story addition back before no doubt permits were required is bowed outward and the roof dips towards the main roof and splays outward as well, due to lack of proper reinforcement. I doubt where the outside wall of the porch was removed to make it an inside part of the dining room is properly supported either as the bedroom above has a floor that dips badly. I had a turnbuckle installed in the attic to keep the roof from splaying any further. I wish you wanted a beach holiday and could come fix my house!

Great video !!!!!

Unsure why this video took 5 minutes

Spacers only removed if you have a trailer then the lock down tabs replace the spacers

Is this with air conditioning?

Thanks for the video! It helped me replace the belt for my dad :D

Tip if gonna bleed brakes anyway take calipers off completely easier to work on a table js

Thank you, I was able to change my own filter. Dealer was supposed to check it but did not.

also you look very familiar lol

your video helped me so much thank you so much from Hamilton Ontario

Great video sir,are those safety shoes ur wearing

The tap should have been taken out first then the pan. What a horrible mess.

Scratch the paint off on any ground to bare metal. Use sand paper or wire brush

i had some problem,, weeds just kept on growing through them.

You have to go to display settings to check and uncheck what screens you want to be shown on the dashboard. The oil life screen is unchecked that’s why it’s not showing up.

Is the hole at the front (3/4 inch) used to measure level?

In the settings under Display you can enable oil life to display under info then you can reset it there! Good video thanks!

I’m getting a 2019 eco diesel with 65,000km on it, do you think I should delete it when I get it? Hopefully you reply back to this comment!

Hi, Great video. I have the same Hustler and overall pleased with it. However, I've had a terrible time with the transmission mounting brackets and hardware. The bolts have either sheared off or come loose or the brackets have broken. Have you had any of these problems? Hustler would cover the replacement under warranty, but would force me to go to a dealer. As a pretty good DIY, I found this very frustrating. Any thoughts? Thanks.

So I have question,why don't you raise your mill up where you don't have to bend over so much, it doesn't take much to make that happen.

Got my 2019 deleted and best truck I ever owned never get a check engine light, what was your MPG? I didn't hear that part

Great video... smart thinking. I have this project in the pipeline

First mod I do is Get the stabilizing telescoping bar arms n Get those Annoying Ass Turn Fuckle Buckle off my Beautiful BX tractor! I just got the landpride 1242 tiller, Mann...wish I saw this video first than I would of wait and get this smaller tiller!!!!

Do you still have it on your car? How is it keeping up in the freezing conditions? Will it freeze and condensate a lot of water? Would it help to plumb it close to the engine so there isnt so much extra volume and it also heats faster?

Delete delete delete. The only answer.

When you do a video like this, maybe you should go through all the steps so because anybody who watches your videos will think you just put oil in and start it up why didn’t you bleed the system first that’s what I’m looking for how to bleed the system when you put oil in it