PowerFlex 525 Parameter Setting RSLogix Studio 5000 EtherNet for On-Board Input Output Tutorial
Vložit
- čas přidán 27. 07. 2024
- PowerFlex 525 Parameter Setting RSLogix Studio 5000 EtherNet for On-Board Input-Output Tutorial
----------
Visit www.solisplc.com/ to view more tutorials, learn PLC programming and connect with like-minded individuals.
----------
⏱ Video Timestamps
00:00 - Introduction
02:10 - PowerFlex 525 Datasheet Overview
04:22 - PowerFlex 525 Field I/O Wiring
11:46 - PowerFlex 525 Parameter Setting in Studio 5000
17:22 - PowerFlex 525 Module Definition I/O Changes
20:48 - Ladder Logic I/O Testing
26:11 - Final Demonstration of Input and Output Setting
26:46 - Use Cases & Conclusion
----------
The PowerFlex 525 series of Variable Frequency Drives from Allen Bradley is highly utilized and respected within the automation field. The drives are compact, versatile, and easy to use. We’ve written an extensive tutorial on how to get started with these drives in a previous tutorial; it covers how to initialize the drive, connect it to an EtherNet/IP based PLC and how to set the right parameters.
View Tutorial - PowerFlex 525 VFD Setup Tutorial
In this tutorial, we’re looking to expand on the concepts and demonstrate a way to access and utilize the multiple Input and Output options available on the drive.
The reason you may want to utilize the IO is to save money on purchasing external components, integrate instrumentation into your drive and save floor space, wiring and cost. We’ve seen the need to integrate closely related sensors into a PowerFlex 525 application; this would be the right way to do it.
Full Tutorial:
www.solisplc.com/tutorials/po...
Find us on social media:
Web: www.solisplc.com/
Forum: forum.solisplc.com/
LinkedIn: / solisplc
Facebook: / solisplc
Instagram: / solisplc
Twitter: / solis_plc
Other Cool Content:
Publishing MQTT Data Using Opto 22 groov EPIC PAC
www.solisplc.com/tutorials/pu...
PLC Simulator - PLC Programming & Testing within a Simulated Environment
www.solisplc.com/tutorials/plc-simulator-programming-testing-within-simulated-environment
HMI Software - Different Tools, Applications and Solutions to Meet Your Needs
www.solisplc.com/tutorials/what-is-hmi-software-allen-bradley-free
Nice demonstration. You covered a broad area and showed how to cover the material using a manual. Thanks 🙏
Thank you for the feedback. We've been asked to incorporate some more datasheets into the videos as people became confused about how some of the registers have been derived.
Very informal video. Thank you for sharing this.
Well informative
is the datasheet wrong where it has the SNK & SRC labels (on the top not the ones at the bottom)? I mean, the way I understand is if the input is sourcing it is supplying 24V and according to those schematics if the if the internal "selector switch" is to the right it is labeled as SNK. I'd love to get that cleared out.
👏👏👏👏👏👏
Thanks for video. Which video do you demonstrate how to read the drive in rslinx studio 5000?
Wiring in the Pilot light, do you know where I can find the amp output (load) that the drive itself can put out? I am always wondering just how large of a load I can put on it.
That's actually a very good question I was thinking about myself. I looked at the datasheet and got the following info: The relay outputs can switch up to 3A while the Opto isolated output (where I wired the LED) provides 50mA of current. It's definitely not much, so you can easily burn the output if you wire up a big load. You'd probably want an external relay on those if you go that route.
I start automation course with u sir posible or not in Hindi
How are you able to power this drive? are you using single phase 480v?
No, this drive has a 110VAC version you can power from a regular outlet.
How can we connect Powerflex 525 With AB 1769-L24ER-QBFC1B PLC without the ethernet?
Depends on what you're trying to accomplish. You can send a speed signal for the PowerFlex via an analog signal.