EASY REAR STEER Tutorial - How to Install in AXIAL SCX24 & ANY SCALE TRUCK
Vložit
- čas přidán 25. 08. 2024
- Recently I was asked to do a tutorial on installing rear steer into a 1/24 SCX24 1967 Chevrolet C10 4WD (Get one here: bit.ly/3jMgVE1) trail trucks. I chose to install it into my Jeep. We have been installing rear steer into models for years and recently stopped by a hobby store in Langford BC called "Afro's RC & Hobby" shop. Afro was the fella that owned the store and he showed off an SCX24 Chevy with rear steer. It was owned by Jordan, and employee of the store - and Jordan showed it off on the indoor trail course. SO COOL! Thank you Jordan and Afro. (www.afrorc.ca)
I hope this video will help all of my friends out there in the world of RC who needed to see how to install this kind of steering system into a hobby truck. This is the SAME MOD that can be done on ANY SCALE of electric scale truck that uses axles and servos.
WATCH MORE RCSPARKS!
“Recent Uploads" bit.ly/2jcC9Rk
"Unboxing Episodes" : bit.ly/2AH6A6B
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshi...
SOCIAL NETWORKS:
Instagram: / rcsparkstudio
Facebook: / rcsparks.studio
Twitter: / rc_sparks
Forum: www.rcsparks.com
Great! Now I have to get another front axle and servo.
RC has become such a big hobby now and not just cars and trucks there are planes, Drones, boats ect.. They have all become so amazing in the past few years 👍😊
Well said!
And only getting better..🤘🤘🤘
You got me in to crawlers 5 years ago, I came across one of your videos of you and Gem out with SCX10’s while I was thinking about getting in to Rc drifting, I’ve never looked back since I got my first SCX10 all those years ago and now from watching all your 24th scale videos I now have my first 24th scale. You do a top job and it’s been a pleasure watching your videos over the past 5 years 😉👍🏻
You know I’m watching lol
I’m a little unsure of going rear steer. Can’t rule it out though lol. I still have 2 more Rc’s coming in December. I’ll check the cost of all the parts and we’ll see what happens 👍 great tutorial by the way!
WOW, I bet the knowledge you did get in this video is from the years of doing what hobbies you love doing
I love how you walked us through the conversion. a little explanation goes a long way! Thank you 👍😁
Absolutely still watching your channel. I think I’ve almost seen every single episode and I love every last one of them. 💯🤙😁
Thanks Kris! Always good to see you in the comment section. Thank you!
@@poppygoatshomestead soooooo, wish I could comment on so many more but no computer unfortunately 👎 but when I can I comment on the ol iPhone 😁 smart TVs not so smart, won’t let me comment either 😡
Medic you always make this hobby exciting and fun.
Can’t wait for a test run on a trail
Awesome video never knew it was so easy
Exactly. I wanted to take the anxiety out of it for everyone. Its super simple, and can be done on all scales of trail trucks
@@poppygoatshomestead thanks I just got the c10 because you make it look awesome and it definitely is a awesome little truck
I will be doing this mode right away! Thanks!
A T-harness that splits the steering output should give you full-time crab steering with the wheel.
this version of all-wheel steering is really cool, and in a small scale truck it is great........thumbs up👍👍
Cool mod. Thank you for showing how it's done.
Still the best and original CZcams RC channel. 😁
I just ordered 2 of these for the wife and I. Now trying to resist ordering upgrades before they are delivered. Lol
After stumbling upon You Tube Gold, then seeing the TTC competitions I started looking into the hobby. I think mini crawlers are a good start for beginners. Ty RCSparks and the whole RC community for showing us how far and diverse the RC world has become.
Finally I get to sit and enjoy a segment . Glad to be here bin busy. But I've bin liking all the videos. Relaxing time and watch some rcsparks man lol yeah
It's realy nice to see all of you mentioning each other and showing that respect . That realy is antes me to get I to the hobby " great bunch of rc people " it's a shared respect even when we don't agree on something lol . I love this hobby rc dude's
Hope you're enjoying yourself on our lovely rocky trail truck heaven of an island.
actually doing this with my betty as well as hot racing shocks, i found one thing that should be noted maybe as a pinned comment, if you are using the stock receiver you will need an extension cable to reach from the back to the front as the stock cable is too short to reach all the way, also with the betty and the deadbolt youll need a different rear mount for the body, because the full plate on them is in the way of full flex with the servo
Although I have been watching your videos off and on for some time I finally pulled the trigger and bought an RC. Just two weeks before having spinal fusion surgery. I haven't even got the thing dirty yet. I ended up getting an Axial Wraith Spawn knowing there are possibly better rigs available but I've wanted one since I first saw your first few videos on it when you first got it. Yes I've been putting it off for that long😲. Life, ya know. Besides, it fit the budget and the local hobby store had one in the shelf.
So as I sit at home recovering from surgery, I've been binge watching about RC trail trucks and crawlers and one thing I keep thinking about is rear steer because, let's face it, the turning radius of the Spawn sucks. This little video has taken some of the mystery out of the process for me. Thank you. Also, glad to see your health improving (been keeping up on that as well, I certainly can relate) keep up the good work.
I really hope you gt to pay with that wraith soon, because you have recovered quickly. Sending healing vibes your way
@@poppygoatshomestead Thanks! I managed to get out to my shop and run it around inside but it's just not the same. I may be hitting you up for some tips as most of the upgrade info I've found is somewhat dated. Thanks again 😉
Thanks for doing that medic! Really awesome idea for these trucks running on tiny courses!
I have GOT to do this just as soon as I get my metal Hot Racing Steering Linkage. I've got an extra plastic front axle case and set of stock front axles from swapping out for the +4 offset axles and for the metal axles front and rear. I even have two extra Emax servos, the metal servo mount and still kept the stock servo mount; April 23rd I'm GONNA DO THIIIIIIIIIIIIIIIIIIIII$$$$$$$!!!!!!!!!!! WOOOOOOOOOOOOOOO, I cannot wait. So I'll get the +4 offset axles at rear and the stock axles at front, Sawwwwweeeeeeeeeeeeeet!
Love it Afro was great that drift track was cool and the mini crawler course was sick love the channel's
Thanks Jason, you Rock!
So cool , I knew after that Afro video that you would do it ! Thanks to you and your videos I am now into RC and have jumped into the hobby bringing my kids along with me . We watch your videos together and get ideas . So I just bought our 1st RC's I got myself the Axial SCC10 III and got both of my kids SCX24's . Thanks again ! Your friends in Boston
They say great things come in small packages...this one keeps growing in awesomeness! That’s what she said!
afro is the man i was pissed that i missed your visit. got to come back soon for a trail crawl
Definitely interested in the 1/24th scale..those axial are a must buy 👍
A nice quick and very easy mod...thanks Aaron.
Doing rear steer on my short wheelbase Deadbolt this weekend! Glad I can watch how you do it first.
I hope this was helpful and takes the anxiety out of your conversion!
@@poppygoatshomestead Thanks. I had some anxiety about the cutting on the chassis I'm planning to do, but I looked up a new one and with those prices. haha let's go.
@@poppygoatshomestead all finished with the rear steer and it's super awesome! Did it a bit differently and realized cutting the chassis to shorten the body was useless as the steering linkage now hits first. If you want to see it check it my Instagram. @vorgto
Goo to see you moving around wishing the best of health to you and the family and friends. Great content.
Dude you already know I'm still watching. Even though we've never met face to face, I've been watching and commenting since damn near the beginning!
man, the weather looks so good on Vancouver Island :) have a nice Time
I appreciate this so much. Just bought my first scx24 yellow Jeep 2 weeks ago. It's sporting a 1/24 scale Bigfoot model body with brass different covers, brass front knuckles and brass wheel weights. Rear steer would be sweet. Thank you.
Right on!
Absolutely think your channel is worth watching, brother you and your family are amazing, you are the reason I got back into RC after being out for almost 30 years!
I appreciate that, RIGHT ON!
I really like that. Maybe i'll do that to my little Deadbolt. I saw someone, sorry, i forgot his CZcams name, who had dig and four wheel steering combined
I'm a bit baffled at the fact there's like 17 different motor mounts for all kinds of different motors for it including the double motor mount dude used to make the Dig rig but NOT ONE PERSON has made a fricken DIG unit that fits this? They got em for the Scx10 it CAN'T BE THAT HARD sizing Down an existing product compared to DESIGNING THEM FROM SCRATCH which has been done on shapeways with EVERYTHING for these so WhatDaDillyYo?! 🤷🤦😞😞😞
And I KNOW they make servos small enough to work it
@@99dedbuffoons17 The way i saw it done, was with 2 separate motors and esc.
I made a bunch of parts for my scx24 to get a Revell 76 chevy body onto it with a full interior. People put a ton of time into these little trucks and it's always cool to see what else can be done with this platform.
I had done it to my little kulak and i used a flightcontroller. Now i have proposional steering on both axels, very cool in my opinion
I can't wait till it's your turn and afro gets to come to the RC spark studio! I really enjoyed your time with him was very cool 👍👍👍
I figured that you would be doing this, and of course on the C10 it wouldn't look right. I did catch Lyle's GRAVE DIGGER video, and DEFINITELY this should be added to that!
I did 4 wheel steer on my everest 10 crawler but I used a airplane servo reverse cable, I can't crab steer but I now have 4 wheel steer and got a shorter turning radius works great
Mate this channel is what has brought my family together- 5 of us all with a different scx 24 👍😎 we’ve built an awesome course in our whole polly tunnel 😃
🙏🙏🙏
Back again to say thanks for the video as of now I have 4 wheel steer. Still have some things to do to it but, "I gotta say it's a whole different crawler with 4 wheel steer".
RIGHT?! Nice one man.. enjoy the massive upgrade!
@@poppygoatshomestead www.ebay.com/itm/Axial-SCX24-Mil-Stone-4-Wheel-Spacer-Weight-Kit-with-Barrel-Nuts-Sleeves/254753500658?hash=item3b507dedf2:g:ec8AAOSw6TtdQeai
Check them out and let me know what you think..
Really now I'm going to have to buy two of them!!
I’m sure that I’ve watched every episode on both channels! Can’t get enough!
Of course we still watching . ain't planning on stopping
Woah. That was simple enough. I try to make things way too har....ahem, difficult sometimes. (I've seen enough shows now to know I have to watch my choice of words.) :)
Dude still here. Love all the vids you do. Thanks for making rc so great and easy to understand. Still look at all your different vids when I don't know something.
I done this on my 1:10 Rc when I was a complete novice, instead of plugging my rear steering servo into the aux, I just hooked up the wires the the front servo wires and boom you have proportional steering, downside to this method is that you can’t turn off 4ws.
Those tires are crazy
Thank you Medic! You are the man! Much appreciated information 👍🏻👍🏻
Always watch all of your videos all the way to the end!
Another great video! Thanks for the info.
Awesome, thank you!
Hey a tip for one handed shear is adding a phone or go pro mount depending on what you use to your controler
You made it look easy. Took the "what now" out of it.
Thank you man I did this because I was inspired by your other vids bcuz they look sweet and bcuz I have been building a custom 1/10 crawler
Nice Work!! Everything functioning perfectly now?
On Horizon Hobby there's a front axle fully assembled and then if you go on Amazon you can find the steering servo so you don't have to buy a whole nother car
I am gonna do this on my lcg chassis thank you for the idea.
Great mod, wanting to pick one up.
Definitely still watching. Love both channels. I like the variety of the things you do. I really like the builds and competitions you do. The reviews are cool and informative.
Glad you like them!
Sir You've just got the crawler world doing 4 wheel donuts. Epic video great shootouts thanks for sharing.
Very tight fit but I built an on axle set up for my Gen 8. Major help
thanks for the guide seems real easy i ight try this myself
i wish that wad a separete receiver so i can use it on mty1/10th scale... thats also a nice ideato use, if someone made a winch for those 1/24 scale trucks
loved it your scx24 is wickid
That is awesome!! Now if you can show me how to do it on my Gray Goat 🐐( 2000 XJ 1:1 ) I would be the cool girl out on the trails! ❤️🐞
Sweet, we just picked up a couple scx24s, ones a Christmas present. We also have a Losi 1/24 trail trekker if anyone remembers them. I want to do this mod to my Deadbolt. So your on the west coast Of Canada now. We're not far, on west coast of Oregon.
Keep up the good work learn lots of things about rc from u and u are funny.
you should know Aaron that I look at most things with you, that you do with your friends! love!
Time to start looking for a steering axle now...lol
Thats awesome, but now I gotta get two!!😂
Thanks Medic! That modification looks awesome! 👍😁
Your videos are the best!
Hi Patches, thanks for stopping by and commenting today. Really cool... thanks for the positive vibes
That’s great. And now install the rear axle of the Jeep on the green car😜
That is so cool!! Thanks!!
Wow that is cool rear steering!
Very interesting video, I saw this great upgrade on the video with Afro's RC, I found it great. I will do it on my scx24, thank you for this great tutorial 😊👍
Glad you liked it!
@@poppygoatshomestead Thanks for your great info Aaron 😊👍
Best video on this subject, you made it look easy which it apparently is! Thankyou for the connection info ❤️
Thank you so much for the very helpful video by the way!!!
Is there a video of how you switched the receiver/whats needed to do it?
Hey on your remote you can access the 4 wheel steer setting and have proportional steering front and rear. I did it on mine. I have a spektrum dx5c.
That’s what I was wondering. If he’s using the Spektrum rugged with a Spektrum receiver then proportional 4 wheel steering should be a breeze. Medic might have been keeping it simple to show how easy it can be with simple settings.
@@rowntrp yeah definitely. I believe the same. He probably wanted to show anyone just getting one that on a budget you can use 4 wheel steer. And with the axles being around 20 bucks why not.
Your awesome brother been watching u now for along time
Tks medic, loving the fresh content even tho loading Kings and CZcams gold was, hands down, THE BEST utube content EVER! Gonna have to try this mod on my scx24...
Glad you enjoy it!
Thanks man worked like a charm
ive become hooked to watching your videos and its pushed me into buying a black scx24 c10 and im already planning upgrades. i dont have the funds for another hobby what have you done to me XD
Can you do a walk through video on how you binded that spektrum controller ? I have that exact controller..
Always love the content!
Thank you so much for stopping by for some entertainment!
@@poppygoatshomestead building a scx24 as we speak and have been waiting for this video from you, much love and respect for what you have done for the community.
@@scornedlioness8681 I am humbled by your comment good Sir, thank you for the kind words of respect. Always a Student, Never a Master - there is always something new and cool coming along :)
@@poppygoatshomestead Hey I’m a rc girl not a rc sir 😂. Been watching you for years and years through a couple accounts cause I forgot the email on the others lol.
@@scornedlioness8681 Dang it! I know when I was writing it, that I was taking a chance. The username could have gone either way there. Thanks again.. and dang, sorry again! haha :)
you look sharp Aaron!!!
You're on top doing home videos, of course they're going to pretend like they don't see you but they do!
that was very easy to do thank you
Finally getting to this mod👊😜
I have the same Jeep with a bikini top I love the rear steer I'm still working the original controller though
Always great on your channel to learn new tips and tricks thank you
Mate your stuff is just 🔥🔥🔥. Keep up the great ur doing for rc. Blaze away🔥🔥🥦🔥🥦🔥🥦🔥
wow, cool that this would be possible with the stock receiver and transmitter, i thought you would need some third party remote control
there's a lot of customization these days, we prefer machines that can work with other accessories/controls etc.
Such a kewl mod!
So awesome great work all around!
So do u think that brass is a great first upgrade, I’m 13 so I don’t have much money to spend so where do u recommend I get the upgrade parts? Great vid keep up the content lovin it!!
Yes, the diff cover for the front, and the spindles for steering.
Ok thanks man!🙂
Aww man every time I watch another one of your videos I spend more money! Do I really need rear steer?!? Why yes I do!
Yes you do..LOL!
Ordered a front end and a servo.. 46.00
Watch all of your videos on both channels. Keep them coming. Great information for us. Thank you again. Have a Happy Thanksgiving as well up in God's Country
Sweetness!