How to reset your civic SRS light
Vložit
- čas přidán 12. 11. 2021
- Just a short one today, the day after cleaning the carpets the civics SRS light appeared. In this video I show you how to reset it on an EK3 civic! It took me multiple attempts to get the timing right.
I believe the process is the same for EG, EK, EP civics - and other hondas around the 90's.
Instructions below:
1. There is a yellow plug under the dash plugged into the fuse panel. It has two wires going into it. Take that plug out, place a jumper wire (or paperclip) into the two holes to short the wires.
2. Turn the ignition key to the “ON” (II) position. The SRS light will go off. Within 4 seconds unplug the jumper wire.
3. When the SRS light comes back on plug the jumper wire back in within 4 seconds.
4. Once the light goes off again, remove the jumper wire. The light will blink twice and go out.
5. Unplug the jumper and turn the ignition key off, wait 15 -20 seconds and start the car - Auta a dopravní prostředky
Thanks for taking time out of your busy days to watch me waffle one. Consider subscribing to support the channel and help me grow
Not all heros wear capes, some use paperclips to get me through my MOT ;) cheers lad
Danke dir Bro. Alle anderen Videos habe ich nicht verstanden. Deiner ist das beste zum nachmachen.
Hast du es ausprobiert ? Habe Angst das der Airbag auslöst deswegen . Hab einen civic Ma9 bei dem auch die Lampe immer leuchtet..
@@invisbusted4710 Ja es klappt. Brauchst keine Angst haben. Habe es schon mehrmals gemacht. Nur bei diesem Video ist es gut erklärt.
@@cubukluugur6777 es gibt ja einen Hauptstecker zum auslesen auf der Beifahrerseite . Der ist das aber nicht oder? Also man muss schon da ans Lenkrad gehen . Hab echt voll schiss das dabei was passiert 😂🤐
@@invisbusted4710 Ich mache das 12 Jahren so. Es ist nie was passiert!
Strong work. It worked Thank you
Bro you are a legend I just did this on my own and it works thank you bro❤❤❤
Glad I was able to help!
I also had to try a few times. I think I waited too long when the light disappears the second time. My final successful attempt was when I removed the jumper as soon as the light went off, the 2nd time. Then I got the double-blink. Thanks!
3:12 reset steps in motion
Thanks for the help , i can reset my own ❤
You should check that the airbags are still working with a test crash.
Perhaps this is the next thing I can do before fitting my replacement steering wheel 🤔
If this doesnt work and you still want the light off just unplug it from behind the cluster
Solves the light issue, but currently in the UK the light needs to illuminate and then go off with the ignition as part as the yearly inspection 👍 you could always wire up a timed relay to achieve that I guess 😆
Cool thanks ❤
That shit worked 🤯
Do i plug the yellow cable back in after reset?
It's only plugged into a holder, doesn't actually go anywhere, I've left mine hanging incase it needs resetting again
My paperclips don't look like that
Have you tried finding a different breed of paperclip? I heard they come in all different shapes and sizes
@@Keats.Garage I'll ask around
Do the airbags still work tho ?
@@Benergy_Fit Disclaimer: I'm not a car mechanic. They should work, else the light will eventually come back on. If so, get a mechanic to check the code. Also know that resetting that light's status does not clear codes from memory if there is/was an actual problem. One know cause of the light coming on, if if the car was left with absolutely no power (dead or missing battery/accumulator) for a while.