Video není dostupné.
Omlouváme se.
WLTOYS 144001 Brushless Conversion | 4s Speed Run!
Vložit
- čas přidán 19. 09. 2020
- Hi guys and welcome back to the channel!
This will be the final video on the 144001 series for a little while so that i can concentrate on some new ideas for the channel.
Buy your WLTOYS 144001 here: www.banggood.c...
Today we test the buggy out on the stock gearing but with a 4s setup to see what it can achieve!
Last time on 3s we hit 54mph which again is a great speed to achieve out of such a small and lightweight buggy (1/14th Scale)
in this speed run we are running:
Racestar 3300kv Motor: www.banggood.c...
Team Orion Vortex R8 2-4s ESC: wheelspinmodel...
Guys this is just a bit of fun i dont intend to run this setup daily if anything i think i will run a higher KV motor and 60a ESC with 2s-3s pack running on 4s was just to see what we could achieve!
I am aware of many people doing this conversion and some even reaching speeds in excess of 100mph but this requires a lot more time, effort and sometimes custom work so my videos are aimed at the person looking to upgrade their buggy to get more speed and performance out of it.
Some have spent 5x or more the cost of the buggy to reach these insane speeds which sort of defeats the reason for buying a budget model in the first place.
I am not looking to set any records but i think the current record for these is sitting at 105mph. I doubt i will ever aim for that maybe 70mph with adjusted gearing and moved up to a higher KV Motor.
The motor mounts on these buggies do not allow you to be flexible when it comes to pinion choice so because the holes are pre drilled you are stuck using the stock gearing setup.
First Brushless Run Video: • WLTOYS 144001 Brushles...
If you missed the build videos for this you can check them out here:
Part 1:
• WLTOYS 144001 Brushles...
&
Part 2:
• WLTOYS 144001 Brushles...
Parts used on the buggy are:
Racestar 3300kv Motor
Racestar 60a ESC 2-3s Capable
Savox SH0265MG Micro Size Digital Servo 15g
Phatbodies ATAK Body
Phatbodies GURT Wing
Contact Foams
***
I know i am not the first to do this conversion and many of you have already done it but thought it would be nice to document my efforts for those of you who may be interested in doing this.
There are a few issues you will face along the way including the super glued / thread locked pinion grub screw and motor mount screws without heat you will almost certainly strip the heads.
But dont panic i cover all this stuff in the previous PART 1 video so be sure to watch that if you missed it catch that below:
www.youtube.co....
Guys i hope you enjoy these are great little buggies and i hope to achieve some decent speed with this one!
Guys i am very happy with the end result but will definitely be back in the future even better and faster so subscribe to stay up to date and see you soon.
#144001Brushless #BrushlessConversion #4s144001
Maverick Strada 4s Speed Run :
• How fast is my Maveric...
******
Thanks for watching guys and If you enjoyed this video as much as i enjoyed filming it then be sure to comment, like & Subscribe to show your support for a brand new channel that wants to take it as far as possible in the world of Radio control!
In the coming months you have vehicle reviews, Brushless conversions, unboxing, upgrades and general RC Craziness to look forward to!
Thank you for your support fellow youtubers and thank you to anyone who has recently followed me on social media!
******
Be Sure to check out and follow beyondRC on Social Media!
Instagram:
/ beyondrc1
Facebook:
/ beyondrc-103925521321907
Twitter:
/ rcbeyond
also if you would love to be a part of a great RC Community be sure to check out:
www.msuk-forum...
with thousands of daily active members who have a huge amount of knowledge and experience in the RC Hobby as well as an RC sales section it is definitely worth taking a look you will be made very welcome!
******
Credits/Copyright Information:
Thanks to AD Motions for the intro & Creatorset for the subscribe animations
All Audio / Sound Effects used in my videos are provided by:
youtube official audio library / Epidemic Sound © 2020
******
Intro Beat Provided by:
MGJBeats - Copyright Free
/ mgjbeats
*******
For any business related enquiries or if you want to discuss featuring your product on my channel or even sponsorship opportunities then please find my email address on the channel home page!
beyondRC © 2020
Releasing this one early guys as i am going on holiday/vacation for a while! But will be back in a week! Hope you enjoy am very pleased with the outcome. This is the final video on the 144001 for a little while as we concentrate our efforts on some new things on the channel. Hope you enjoy and be sure to subscribe for a chance to win on the 1k Giveaway which will hopefully be very soon! Cheers guys and see you on the next one! 😎👍
I'm running a dirt cheap brushless system in mine. 5200 kv 3650 motor on 3s gave me 70mph. This is great content to watch.
Hey! Thanks im glad you enjoyed! :)
If this rolled up on my feet without the casing, I would automatically have flashbacks of people attaching c4 to 4x4s in the Battlefield series video games. 😂
hahaha this is very true! I'm sure call of duty did the same!
One way to avoid problems caused by body constraints is to not use one. Simply mask-off the tires & shocks and spray/brush the rest with attractive colors in imaginative patterns.
By far the best upgrade videos on the WL toys 144001... great channel! : )
Thanks glad you enjoy my videos! Really Appreciate it!
What 3s battery do you recommend? Also, which servo is better, the Savox SH0265MG Micro Size Digital Servo 15g or the JX 1181 servo?
@@matpgm i run 2200mah 3s from hobbyking : hobbyking.com/en_us/turnigy-2200mah-3s-25c-lipo-pack.html?___store=en_us
Those just fit in the battery location but you will need a longer strap. Not sure if any larger would fit.
With the Savox it will be slightly smaller as you may have to do a little mod to secure it down like what i did in the part 2 build
The JX servo is an exact direct fit with no modification is also slightly more powerful and i still have one on order the only reason i went for the savox was because it has been on backorder for 2 months on banggood and i wasn't prepared to wait.
you genius. got this body and been scratching my head for 2 days trying to fit everything in. im copying you. battery on top lol
Nice run I got 58 miles an hour out of mind,thanks for sharing👍
Once again great content. Looking forward to more great video. Keep up the great work building the channel!
Thank you AB! Loads of Great stuff to come! Working my way to the big 1k!
I really like this setup, looks epic very nice job 🤘
Thanks 😎👍👍
That’s awesome dude I have got 75mph on 5900kv motor on 2s stock gearing and planning on getting a 120a esc and putting a 3s pack in it
nice .
i try to avoid curbs for an ideal speed run spot .
run off road or run into cement wall .
always good to see others set ups .
keep it up !
Thanks 👍
Hello can you please list the parts for the 3s upgrade,great video. 👍
You make some great quality videos! Nice passes!
Thank you very much!
Its getting faster every time , keep going and a great speed Run 👍😊😎👍
Thanks! What a little rocket! Cheers 😎👍
i like the look on the car and every time it got faster
Yes exactly they are great! Very quick!
Wow that is bloody fast. 🏎🏎🏎🏎🏎🏎
Its quick isn't it :) Love this little WLTOYS it's probably one of my fav RC's of all time!
Great video mate and I was close with my guess again but that buggy is quick as hell
Mate it's a rocket! Managed to dial down the steering rate on my sanwa mx6 in the end 🤣. Very happy with the achieved speed on stock gears. Will leave this for a while now as you know I'm working on some new stuff for the channel. But will definitely go back to it in the coming months maybe even build a 100mph one. Think the record is 105 which is insane.
beyondRC seeing one of them do 100mph and oils be insane
Will make a big return 😉 just you wait and see 😎
beyondRC it probably will be a big return
a new pb without crashing is always good. as far as the fresh content i like update vids after modifications. if you only want to make a few vids a month then i understand. but if you want to make more we can see updates you make...
Hello, what size Contact Foam tires did you use for WLTOYS 144001 upgrade?
Speed meter under rear wing ? Better less resistance maybe...
Awesome! Little rocket!
Have a good vacay now!
Thanks mate! Certainly is but im not satisfied yet! Will be back in the future even faster!
Can't wait for my brushless kit lol, you can hear the "niehieeewwww" 10:07
it's a great sound! This thing was really moving!!
Wich kit you buyed ? 😉
Great video. keep up with the good work.👍
Thank you! 😎👍
Pretty cool man, I like your Channel. Just picked up a new subscriber.
Thanks and Welcome! :)
What happened to the other esc?
Dude I just love your videos. And ohhh damn that beyond rc is ohhh boiii soooooo fast mahn 😍😍. I wish I could get a reply from you and a like too 🥰
Love from India 🇮🇳
Hey I'm glad you are enjoying the videos! It is very fast for such a small buggy! 👍👍😎
Which wheels & tires are you using? Size?
That's fast
for a 1/14th buggy is more than double the stock out of the box speed! 😎
i hope this is not a stuppid question but how do you know when the lipo is discharged?
the ESC will cut out. This is known as LVD (low voltage detection)
Please can I have a link to that Phat bodies attack body shell.. thanks mate
www.phatbodies.co.uk/product/phat-bodies-atak
No Way Man!
Great stuff, the rear air brake an Front air Damned need to go already. Shocks at der front with distubed aero hitting the spoiler?
Need to clean the downforce, make it conformal, sleek, even the wheels are screaming, "we create lift Dude!"
Hahahhahahaaa, the front is blunt and the rear air brake is lifting it. stick a Lecci Hybrid Toymoter Le Mans body on Our Little Freak an feel da G-33s Dude.
Unreal Mate,, Scribed cause of Your science Friend, Lurve it thanks.
Glad you enjoyed! I think a lot of changes would be required if I were to chase even faster numbers !
Where should I look for tools to make these modifications?
A few basic screwdrivers and a decent set of hex drivers and you will be good to go :)
Little rocket
124018 is same Car but larger !!!
Can you make the modification video Any Way o the 124018 ?
Because is larger the configuration its going to be diferent!!!
Please make IT
Test IT for 100 mph
Great videos!
However, I have one question: You used the original ratio 27T/44T, and an original motor mount with the 4 holes (550 motor) together with a brushless 3650 motor. Does this work without changing the motor mount? Wltoys uses a different ratio, a different motor mount (6 holes) and a 2845 motor for the brushless version 2.0.
Before I buy the wrong parts, it would be great if I were sure.
I have two Wltoys 124018. One I improved with 80 A brushed crawler ESC, 3.5 kg Emax metalgear servo and a Dumbroc receiver (gyro). and controller, because these parts are cheap scrap on the factory car. Now it is perfect, good brushed systems also have advantages. I would like to convert the second 124018 to a brushless system. You have shown here wonderfully how this can be done cost-effectively, and made the necessary tests 2,3,4S for us. Thank you very much!!!
they stock mount on a 124018 fits 3650 motors with the original gear ratio , but you can also get the brushless V2 motor + new mount + new gear combo for 30$
Bro. What tyre that you used for this rc buggy?
contact foams
How much do you want for the little car
Going to build one my self thanks for the great video and info !
No problem! They are great fun brushless :)
Can't wait
Nice run 👍🏁
Thanks 👍
Danson park ?
Where did you get the wheels and foams? I've gotten mine to 59mph with a 35$ brushless esc combo and 5$ steering servo from amazon on 3s. Thanks
There contact foams, from www.racing-cars.com (Schumacher racing)
exactly that. Contact foams which im sure are also in the US. Im guessing you are US!
Link for tires?
Good video, very fast !
Cheers mate! Considering stock gearing im happy with that speed! Higher kv motor, gearing and few other bits this thing will fly. Plans for it in the coming months and ill have to find a runway! 🤣
beyondRC will watch with interest then!😀
Will the esc hold on 4s for bashing? Thanks
Wuao...!!!!! 🚀
Can you still use the stock controller when changing ESC and servo?
No you can't unfortunately everything has to be changed 😔👍
any recommendations?
I mainly want to upgrade the electronics. The stock won’t last
Dumborc x4/x6
I added a a wheelie bar on mine, it stopped it flipping at high speeds 👊🏻👍🏻
Which one did you use? Custom job?
beyondRC just made my own
Hi, are the rear tires wider than the front ones? 😕
26mm on front / 30mm on rear
please link for buy body cover ?
Hi bud, great videos. By any chance would you sell the upgraded 144001?
i would love to but it is no more! all the parts have gone into another upcoming project on the channel :(
@@beyondRC ah man, well in future if you do plan to sell any then I'd be willing to buy. I've got an a979-b which I've upgraded myself but I don't have much time to do my 144001.
No problem! 😎🔥
This is an awesome mod. I recently got my 124019 to 105kph on 3s. Not sure I could get away with it on 4s though... maybe. I have a brushless 3650 kk series surpasshobby 3600kvmotor, and a 60A surpass hobby esc.
Sounds about right, I got my 144001 to 99,7kph on 3s with a 3300kv motor!
Do I have to change my sevo
yes if you decide to go brushless! you won't be able to use the stock servo as the stock system it has a 5 wire system and pretty much all receivers have 3 wires.
Thank you I ordered a brushless motor and ESC combo on banggood what servo would you think is a good fit
klasse
Yes great video I’m on my 2nd 144001 as the 1st one I just pulled outta the box and ran it!! Not good I upgraded it with the metal parts not good either!! So I bought another 144001. I’ve the 1st one as a donor car for a few parts n I’ve started a new build with the contact foams Phat atak body and am still brushed but it is smoother and faster as I followed your 3 tips b4 you run it. It’s not even been on the road yet but I can tell it’s faster. It’s so smooth and quiet just on 2s. I want to go brushless can you pls 🙏 tell me the motor,esc and servo you are using please?? I think I’ve found a servo? But motor and esc is something I need to get right and there is so much weight in the standard 550brushed I have in it now that you can see and feel not much rebound on the back right swingarm. I don’t want a huge brushless can of coke sized motor in there 🤣 but just something along the lines you are running? 3650? I don’t wanna go right up to a 4600kv or 5200 as I think these motors are too much 4 this car? I would b greatful of any input off you when you’ve time pls? Regards Andy 👍
Hey Andy im glad you enjoyed the video! So servo wise i would say a JX1181MG or something similar would be a good choice i know some Emax servos are a direct fit but not sure on model numbers. 3650 would be ideal on this maybe up to a 4200kv or similar if you intend to run 2s something like that would work fine with a 60a ESC.
@@beyondRC thanks for your input and yes I’ve ordered the JX1181MG servo there a straight swap from the stock one. I think I’m going with a Gool RC 3650 and 60amp ESC and 4200kv will cost about £30-£40 for them both I did a costing and coz I’ve an old 144001 I’m gonna take the mount and pinion off that one and just replace the motor on it with the one that comes out of the new 144001 the contact foams were £15 and I found a great tip off @MeHim RC bigger bearings I think there 7x4x2.5mm? And we’re £5 and stop the wheel wobble. Two either side on both the front drive shafts and one either side on the outside of the back cups got the phat atak body and all for about £140 which is still cheaper than the brushless EMB and it will be all my own work. I will catch you on your next video 🙏 for your help 😎
@@beyondRC does the stock pinion off the 144001 go straight on a 3.175mm drive shaft of a 3650 brushless motor pls? Say a Gool RC 3650, 4300kv......I tried getting the pinion off the 550 brushed stock motor 🔥. Used a Bunsen burner lighter n got the motor mount screws out but the grub was not happening 🔥🙈 Rounded it with the Allen key!!! Bought the mount n new pinion for £6.93 off E-Bay, easier 🥵. Just wanna now that it will fit n mesh nice with the brushless motor b4 I buy that? I would appreciate any help? Thanks 👍
Yes it does its a straight swap. I have no idea why they use glue instead of threadlock it's very annoying! Good luck with the conversion 😁😁
@@beyondRC so happy 🤣 I can order the motor and esc now, I’m going with the Gool rc 3650 ,4300kv I’ve the jx servo on order aswell n did the tail yesterday on the build and cut the body. I’m not sure I’ve so many options? Velcro along the stock black side skirt and a strip with on the body to grip and it would be solid? And I could use 2 body posts aswell? Like i said @ptions” thanks for your rapid response 😎 I’ve blisters 🤣 all over me thumbs!! 🙈🤣
Good vid
What off road tires do you recommend?
Have to be honest have only tried the stock tires and the foams so difficult to say. You have given me an idea for a future video though maybe researching and trying out some off road tires :)
beyondRC - thank you and have a good holiday.
Have you looked into making this long wheelbase using the lc racing chassis and top deck..
hmm not until now. That would definitely improve stability wouldn't it?
@@beyondRC yes mate definitely would. I've got one coming too. And we can swap info if your up for it. I'm gonna attempt to race it against some 10th at my local indoor club 🤞
You got any part numbers? I'll check this out on pay day 😉
Long term would love 100mph
@@beyondRC dms racing stock alot of lc parts. But haven't actually worked out what we need.
I rekon 100mph is easy with the lwb 😁😁
I got my Jato motor upgrade today: Speed was above 200 MPH but could not find the GPS after the run... neither the car.
I do not recommend Jato motors unless you place a tracker on the car.
Here is the link to the speed run I made : czcams.com/video/cHUsGFGhfmk/video.html
;-)
All you speed run guys seem to go about it a rather odd way... Let's take a go cart and try to fit a 1000hp hellcat drivetrain in it. Instead of a 1000hp lightweight say Hayabusa engine on it.
Guaranteed the lighter option will be faster.
Brushless motors , for the most part shouldn't be reved over 60,000rpms, and with a vehicle that small, you don't need 540 sized torque. A 380 size motor (@28mm) would have ample torque.
But back to the RPM issue. A 5700kv motor on 3s will be spinning faster than it should and you risk destroying the motor.
I guess my point is, my Losi mini 8 with a 2035 4500kv motor on 3s is faster than your car. I don't get the "big motor" craze.