Using Your Powervision 3 With AA Tunes
Vložit
- čas přidán 20. 11. 2018
- This video explains how to flash your Polaris vehicles with the Powervision 3 tuner loaded with Aftermarket Assassins custom tunes. Find this product and more on aftermarketassassins.com
- Komedie
thanks alot a full review on the tuner and not just the installing video
Great video buds! We're torn between AA and Bikeman Performance. Cody runs the AA tuner stage 1 and loves it. He's also got the clutch kit but we're looking for a stage 3 kit for Benny's S900. Thanks for the information. We appreciate it.
I have to again give Kudos for such a detailed video. I can't wait to start playing. Del Cat and now the Tune so I don't get Deceleration Pops.
Bought a 22 General XP, and I’m hoping to get one of your tuners for it when the warranty runs out. Already have an exhaust and clutch kit.
just bought one. I got the LeoVance delCat with the little baffle looking muffler on it and im going to run the stock muffler that I used J/B wield on the inside baffle holes. I don't want super loud so..
Hello, is it possible to delete EXUP and AIS with this device without using eliminators? Yamaha MT-10
My kit doesn't give me the ecu read option. I am trying it on Yamaha mt09
What are the power gains I can expect
Is there a way to make you fourweeler chop while idling and rev to about 1500 rpm when u crank?
Anything for the 2023 570 sp Polaris yet?
hi, same procedure to can am x3? you don't have to take off the key once it saved the stock flash and then put it again and flash the tune?
See this video: czcams.com/video/cP1jSL3ckxU/video.html
Some temporary tips for driving 2022 xp pro with AA tune? Im probably going to email this morning because I am interested in adjusting my own mapping from off the shelf
This article should help you: aftermarketassassins.com/tech-blog/f/pv3-gauge-setupmonitoring-for-turbocharged-vehicles
Does the tuner have to stay plugged up? Or can I unplug after the tune is selected?
@aftermarketassassins
I have the same question?
After you upload the tune, you can absolutely unplug it, if you don't want to use it for the gauges.
I have 2016 fz09 kn filter, m4 full exhaust, quick shifter, graves block off plates. What tune can you do for me?
Sorry we only do performance products for Polaris & Can Am UTV's
Does this work for the Turbo S? Do you have to get a clutch kit when you add the tune? Thanks
Absolutely it works with the Turbo S. You can run a level 2 tune on the Turbo S without a clutch kit. To run level 3 or higher you would want clutching, exhaust, and a billet blow off valve. aftermarketassassins.com/products?keywords=stage%202&olsPage=products%2F2017-rzr-xp-turbo-aa-custom-tunes-for-powervision-cx-01-30001
@@aftermarketassassins5491 what clutching is recommended with stage 3 tune?
Could be a dumb question but can you show where you plugged it in?
And also these tunes are run off stock parts? Or is each stage tune adding different parts to machine? Thanks
Hey, what model do you have?
@@aftermarketassassins5491 20 rzr xp turbo
@@scored5 Diag port is under the hood by the bus bar. You can run a level 2 without doing anything else. See this link as it list the tunes we offer and the supporting mods needed with each level. Thanks! aftermarketassassins.com/products/ols/products/rzr-xp-turbo-aa-custom-tunes-for-powervision-cx-01-30001
Does the 2016 rzr turbo powervision tune kit for 650$ come with the big injectors?
Yes it does!
Do we have to keep it plugged in? Or can we just flash it and unplug it?
You can leave the Power Vision hooked up for gauges or completely remove it after flashing your ECU. (From their website)
I bought a 205 up kit for my Canam x3 turbo it came with a custom tuner but I want to go to e-85 is there a way to download the tune to the map tuner without buying another tune
Hi. The E85 tune is a separate tune we have to build, so it would need to be purchased. You will also need our 1200cc injectors. If going this route, the current tune you have will not run on the 1200cc injectors, so most purchase the level 3 (205hp, 91-93 octane) and level 5 (E85) for the 1200cc injectors. See here: aftermarketassassins.com/products/ols/products/aa-custom-tunes-pvcx-for-canam-x3-120hp Thanks!
Do you have to mount it in your vehicle and keep it on? Or can you unplug and go ride
We do offer a few mounts. What vehicle do you have?
I followed your vid finished the flash turned my rzr off then back on seconds later. But reading my directions it says to wait 45 seconds I didn’t do that will this cause any issues?
No issues at all, you will be just fine. Thanks!
@@aftermarketassassins5491 thank you! Test drove
It and man night and day difference! Appreciate your product and customer service
Does it fits Rzr 900 xp? And does it controls the fuel?
We don't list them online, but we do carry them for the Xp900 as well. $475. We are re-flashing the ECU, so rev limits, timing, fuel and more.
Anything for 2019 canam ryker rally edition??
Sorry we do not have anything for the Ryker
Do you guys have any e85 tunes? I dont have 91 octane around me only 87,89,93 but the 93 contains 30 percent ethanol is that safe to use? I know it's still 93 octane but pump says for flex fuel only
Hey! Yes we have specific E85 tunes. 30% ethanol is not very common and should not be used unless tuned for it as ethanol content can change tuning considerably. See aftermarketassassins.com for tunes we offer for your model. Thanks!
Flex fuel vehicles can run on gasoline, e85(85%ethanol) or e10 (10% ethanol) or any combinatio of those. Do not put more than 10% ethanol in your motocycle or boat. Look in your owners manual newer vehicles may differ
@@aftermarketassassins5491 you have E85 tunes for a rzr 1000?
@@nealkrug4193 We do not, really no advantage as power would not change much, and it would take fuel pump, injectors and possibly more to get this done. On a higher compression motor it would make more sense.
you guys have sent me a tune but I have Mac desktop and when I click on your link or drag it to the tunner it just disapires when I unplug it from the computer
Hey! Do you have a windows computer to try? In the past a mac work fine for the file transfer, but it is possible things have changed as we don't use a mac very often for file transfer here.
Aftermarket Assassins I will give that a try
This keeps happening to me, any one know a solution?
Anything for a 2019 can am defender xmr?
Sorry we do not
If I get this tuner plus a launch control module, which needs to come first in setting it up? Tune it then set up LC?
You would need the tune to run launch control or you would go into misfire protection. So flash first, then install the LC. Thanks!
@@aftermarketassassins5491 Thank you! And a stage 3 tune for a Turbo R will do fine right?
@@bigsmoothhh2 Yep, they rip on level 3! We do suggest clutching, blow off valve, and exhaust for that level.
@@aftermarketassassins5491 Sounds good, I have an RPM blow off valve, RPM J-tubes, intake, charge tubes, and a RPM cut out exhaust but no clutching so I will add that to the list
So if it already saves a stock tune I don’t have to pick or buy the stock tune on the website correct?
Correct. Just pick the tune levels you want.
@@aftermarketassassins5491 so I can buy tune level 2&3 and when I plug it in,it’ll save the stock one like it did in the video?
@@seymourclarkson2336 Correct, unless it is a Polaris wideband model (blue O2 lead) or any Can-Am model in which it cannot read the stock file. We then provide you with the stock file.
@@aftermarketassassins5491 how do I tell if mine is the wideband or blue O2?
@@seymourclarkson2336 See here: aftermarketassassins.com/tech-blog/f/rzr-turbo-evap-ca-models#
Will it remove my check engine light I have code 1127 which is over or under boost
Our tuning will desensitize the 1127 codes, but if there is a true issue with the vehicle, it will still set the code as this is a major safety factor for your RZR. This is a good read: aftermarketassassins.com/tech-blog/f/rzr-xp-turbo-boost-overboost-low-boost-waste-gate-adjustments
can this tune more than 1 razor? how much is licensing for a 2nd machine?
It can tune more than one and the license cost through us is $250, plus tunes for the new model at $75. IT is much easier and cleaner to purchase a new tuner... they are intended and work better as a single RZR flash device.
@@aftermarketassassins5491 Does the tuner have to stay plugged up? Or can I unplug after the tune is selected?
@@danloehr6389 It does not have to stay plugged in. If you dont want to data log and have the gauges you can flash and remove it
I can't get any tunes on my 2020 570 sportsman. It reads the ecu fine. But i cant get tune files from www.dynojet.com/pvtunes.
I can’t either for my 2011 Polaris ranger rzr 4 800.
WoW, nice gauge read out !!
I wonder why they didn't make the screen bigger & make it a touch screen ??
cassellracing so it costs $169 instead of $299. Why would you need bigger or touch...lol milineal.
Why not take an Escalade on the trails,damn wormy ass millennial
Oh i donno, maybe because its meamt to go in a machine that sees mud and water all the time?
Do you have a video of the port where hook this up?
What model vehicle do you have?
@@aftermarketassassins5491 2022 Turbo R
If I already have a flashed and tuned ECU will it go back to regular stock or what I have it flashed to currently
Let us know when purchasing (notes in order section) and we will supply a stock file for you. Install the stock file into your ECU first before reading or flashing. Then you can install one of our tune files. Sometimes the PV3 does not like this process, so give yourself 2-3 days so we can help you if issues come up. Thanks!
Where do you plug it in?
Hey! That depends on your model. On Polaris RZR's the diagnostic port is under the hood.
So, whit this thing I can reset mi current miles to 0 miles ? In the case if a restore mi engine.
Sorry that is not possible as mileage is not able to be edited as it's stored in a different part of the ECU/gauge.
@@aftermarketassassins5491 thank you, i appreciate your time to help.
Is it good for 2010 RZR 800s
Sorry it will not work with your year/model.
I just installed my stage 3 full peformance AA kit today. My relative boost it showing up as - and is 4-5lbs lower then my requested boost. What could be the cause?
Is that at wide open throttle? Boost will only line up with target at wide open throttle.
@@aftermarketassassins5491ooooo ok. No not at wide open. I'll check at WOT. Thanks guys
can this tuner be used on my 19' ranger xp
Absolutely, see here: aftermarketassassins.com/products/ols/products/ranger-1000-aa-custom-tunes-for-pvcx
@@aftermarketassassins5491 great, is the listed in USD or do you have a dealer in Canada?
*listed price
@@BillyTpower That's in USD. Most go direct to us from Canada and we ship there almost every day right now. Thanks!
@@aftermarketassassins5491 okkkkk You're welcome.
Do they need to be updated?
Tunes do not unless you have some sort of issue to take care of. The device firmware can be updated from time to time. The latest firmware version is 2.11 Thanks!
@@aftermarketassassins5491 thank you! I have the trinity full exhaust so which tuner mode do I select?
@@itskerbc If you have a naturally aspirated machine, our level 2 tunes were developed to be used with any aftermarket exhaust system.
Does the tuner have to stay plugged up? Or can I unplug after the tune is selected?
You can unplug after the tune is uploaded. One the REALLY nice features of this programmer.