Jeep Wrangler JL Headlight Adjustment
Vložit
- čas přidán 11. 07. 2024
- ⬇️MAIN TOPIC:
This video offers detailed instructions on how to adjust the headlights on a Jeep Wrangler JL.
⬇️TIP:
A tip on how to fine tune the adjustment in order to keep your headlights out of the eyes off other motorists.
⬇️MAKE¢ENTS:
A subscriber shares a tip on how to reduce weight on the CheaperJeeperTV Sleeping/Camping Platform.
* Where possible, Affiliate links are used for products featured in the videos. This means that should you decide to make a purchase through the provided links, CheaperJeeperTV will earn a small commission that will go towards supporting the channel. Thank you. *
(DISCLAIMER: Any and all content provided on the website and CZcams channel is Cheaper JeeperTV’s opinion and for educational and discussion purposes only. Seek a professional’s advice where appropriate for your vehicle.)
www.CheaperJeeperTV.com
CheaperJeeperTV CheaperJeeperTV
⬇️ Things used in the making of this video:
1. Canon M50 4K Camera: amzn.to/2ZXPFZZ
2. Sennheiser MKE4 400 Microphone: amzn.to/2QRJGBZ
3. Camera Tripod: amzn.to/2ZRjfjM
4. My MacBook Pro for editing/uploading: amzn.to/2ZTb6eC
⬇️ Items Featured In This Video: www.CheaperJeeperTV.com/featured-products
⬇️Music:
Communicator - Reed Mathis - CZcams Audio Library
Finland - CZcams Audio Library
Homer Said - Dyalla - CZcams Audio Library
Hulu Ukulele - Chris Haugen - CZcams Audio Library
Sunny - Bensound Royalty Free Music
Welcome to the Show - Kevin MacLeod (incompetech.com) Licensed under CreativeCommons: By Attribution 3.0 License CreativeCommons.org/licenses/b...
In front of the LCBO 😂
Great video I’m gonna go to my office tonight to aim my headlights since my driveway is angled!
Thanks a lot!
Finally!!!! I was wondering if anybody had noticed. Nobody mentioned it until now. Thanks for noticing. Cheers.
Great video, a lot of jeep owners don't make that adjustment and they end up blinding oncoming traffic. Hopefully this teaches everyone to do it right!
Hey TrailWalker, thanks for the feedback. I was surprised that it only involves one adjustment screw. So easy.
@@CheaperJeeperTV They did a pretty good job of making it easy, I prefer the location on the JL compared to the JK, but both are just one screw
Thank you so much! You inspired me to do a 2.5" AEV lift on my own to save money and now you even taught me to adjust the headlights properly! You are making my bank account really happy 😂
😂That is really awesome to hear!
I’m happy that you’re finding the videos helpful!
Please feel free to share out there to help the channel gain some traction.
Thanks. 🙏
Will look forward to seeing your updated video on reducing weight on the Sleeper/Camping Platform. Really appreciate all your videos. Thanks for the Make$ents Tip.
Awesome. Thanks also for the feedback. It helps me know if what I’m putting out there is helpful or not. Cheers.
I have a lift going on Wednesday. I will verify that they adjusted the headlights. Thanks for the easy to follow video.
Hey Michael S, You are welcome. Cheers
Great video !!
I will now be able to adjust my headlight.
Thank you for sharing your video!
Hey Alfredo. Glad to help. The only trick part is to make sure you have a long thin #2 Phillips screw driver to reach that adjustment screw behind the drivers side light. Cheers.
Thanks dude. You saved me time of figuring out what tool was needed for adjustment. Glad things are still using a phillips. 😂 even more glad I bought the extra long snap on ones that probably haven’t ever been used except for doing my 392 that had the lights WAY too high from the factory even after throwing a winch on.
Hey SteveSRT, I’m glad the video came in handy. Cheers.
Great tutorial on how to adjust the headlights! Thanks!
Hey Mike, Thank you for the feedback. I’m glad you found the video helpful. Cheers.
Thank you so much give me all the details that I needed appreciate it. I will be watching more.
Awesome. I’m glad you found the video helpful. Cheers.
Thank you! Appreciate your help
Hey Doug, thank you for the feedback on the video. I’m glad that it was helpful. Cheers.
Great help on headlight adjustment
Thanks. I’m glad you found the video helpful. Cheers.
You rock ! Thanks for the info !
Hey Preston, Thank you very much. I’m glad you found the video helpful. Cheers.
Great video ✌ Couple of additions, perhaps: 1. The adjustment screws have been moved to a more convenient location in my 2021 JL (just on the side of headlight assemblies) and, 2. The torx bit works even better than the Phillips screwdriver.
Hey Manoj, thank you for the updated information. Cheers.
Thank you for the video. I saw others that didn't fit my Jeep. Yours got the job done. Only thing is I found turning clockwise lowered the headlights not counter clockwise.
Awesome! I'm glad you found the video helpful. As for the direction, my JL is a 2018, maybe they changed something in other years??? Anyway, I'm glad you got it sorted. Thanks for the feedback.
Cheers
Great video !! thanks
You are very welcome. I appreciate the feedback. I’m glad you found the video helpful. Feel free to share.
Very very helpful! 💯
Awesome! I’m very happy to hear that you found the video helpful. You may also enjoy the window wiper replacement video as well.
Cheers
Since all Jeeps are not at the same height due to lift or tire height, measure from the center of headlight to ground then subtract 2”. Eg headlight height center or dot is at 38” - 2” = 36” headlight cut off line at 25’ away from a vertical wall.
Thanks for sharing. Cheers.
Good info for anyone adding a lift, or changing out their lights.
Hey Johnny JL, I agree. It surprised me how easy it was. I’ve seen in the forums people mentioning being flashed by other drivers. It’s likely not that the lights are too bright, but just that they need to be lowered a bit. Cheers.
Well done
Hey Pretzel, Thank you very much. Cheers.
Thanks for the lesson, i got flashed by other drivers a lot last night suddenly. Time to drop my beams!
Awesome. Glad you found the video helpful. Cheers.
An excellent example of something very easy to do yourself. Thanks for the tutorial!
Hey Randy, thank you for the feedback.
This is great. I just went on a 3k mile drive around the country and kept getting flashed with my regular headlights on with aftermarket LED bulbs.
Awesome. I’m glad you found the video helpful. Cheers.
See I installed my new led halos and they point straight to the ground . I need to raise them ! Thank you!!
You are welcome. I’m glad you found the video helpful. Cheers
I have a JL with a 2” lift. The center of my headlights are about 42” (3.5’) off the ground. I adjusted my headlights using the guidance in this video and I noticed that the light from my headlights doesn’t extend nearly as far in front of the vehicle. In comparison, the light from the headlights on my car extends much further down the road. This got me thinking. The height your lights should shine at 25’ is dependent on how tall the vehicle is. To take it to an extreme, suppose I had a 12” lift on my Jeep with 42” tires. My headlights would be sitting almost 5’ off the ground and to get them to shine 3’ high at 25’ they would need to be angled sharply down, resulting in the light reaching the ground very close in front of the vehicle. Compare this to a stock Jeep with the headlights physically located just a little over 3’ above the ground. They would only need a slight downward angle to hit the 25’ target at the 3’ mark but since the light is shining almost straight out it would travel much further down the road giving much better visibility at night. To summarize, two vehicles of different heights with the headlights adjusted to shine 3’ high at a 25’ distance are going to have a noticeably different light projection.
Hey James,
Thanks for your insight.
Cheers.
Great info. Hopefully you can help what size screw driver do I need? I know a extra long one but not sure what size I need
Hey Heather,
A long #2 will work. I think if you have a long #1, or #3, it would still work for you.
Cheers.
@@CheaperJeeperTV thank you so much!
The screw is extremely easy to strip out (especially on the passenger side, where it’s hard to get the screwdriver seated properly). Jeep, really thinking ahead, also made the lights adjustable with a 10mm Allen wrench (look closely at the shape of the opening where the screw is located).
I found a 6” magnetic bit extender, extends your T40 bit in the Jeep tool kit long enough to adjust Your JL headlights.
Hey Jeff,
That's brilliant. Thanks for sharing.
Can you share where we can get one?
Cheers.
@@CheaperJeeperTV Canadian Tire but I’m sure you can find them at any hardware store with the drill drivers and drill bits.
I just bought my Wrangler and everyone keeps flashing me. I'm like i don't have the high beams on!!!!!! I will try and do this asap. Thank you for explaining this so well
Hey Christina, You are very welcome. Feel free to check out the other videos as well.
Enjoy your new Jeep.
Cheers.
I think the headlight adjustment screw is different on the 2021 JLU. I only see a hex adjust screw near the top of the headlight and I do not see the adjustment screws that you showed. I have looked with a flashlight and they simply are not there. This doesn't see to be verifiable on google or youtube because the 2021 models are too new....I guess? I just went and tried it and the adjustment screws are at the top of the light on the 2021 Jeep wrangler Rubicon!
Hey Larry, Either that or maybe my LED adjustment screws are different than non LED lights? Do you have the optional LED lights?
@@CheaperJeeperTV No, I didn't get many extras cuz I wanted a manual and had to drive over 200 miles to get it cuz there were only two manuals in Southern California. The manual is the base rubicon model. I have added a lot to it but will never have a heated steering wheel or heated seats but I really don't need them here in southern calif.
I see. I wonder then if the stock headlights have a different housing, and therefore different screws are used to adjust them. Enjoy the weather in S. Calif. :-)
Cheers
Same with my 2021 JT Willys.
I have a 2018 JLU Sport S without factory LED’s. And mine is the same as @Larryr. You’ll need a 5/32 hex to adjust them.
Would you not want to start by measuring and moving the Jeep 25’ from the wall before putting up the tape at the 3’ mark?
I guess either way would do. 🤷🏻♂️
Cheers
Do you adjust with the bright lights on or with your low beams on?
Low beams. Cheers
had to turn clock-wise to lower My 2020 JLUR beam. 🤷🏻♂️
🤷🏻♂️
Are you adjusting the lights while on high beam or low beam?
Hey Jack,
I adjusted them while the lights were on low beam.
Cheers.
So how to calculate the LED light beam height on the bare wall if my Jeep was lifted up by 8 inches?
I’m not sure about that. 🤷🏻♂️
What is light sensitivity 1 2 and 3
🤷🏻♂️
Hi, so i tried turning counter clock and my lights aren't going down. Not sure what I'm doing wrong 😂. I'm so clueless
The Jeep in the video is a 2018, but somebody else told me they had to rotate the other way around so maybe they changed it in newer models.
? Did you try turning it the other direction?
@@CheaperJeeperTV thank you soooo much. It worked. You have been super helpful. You're appreciate it
Awesome! Cheers.
I don’t understand your “3ft mark” ?
The way your supposed to aim DOT VOR headlight is to measure the height of the center of the headlight and then at 25ft :
Same height if height is between 22" and 36"
-2" if between 36" and 48"
-4" if between 48" and 54"
Headlights should be no lower than 22" and no higher than 54"
Hey that’s great information. Thanks for sharing. Cheers.
EASY PLEASE LEMON SQUEAZZZZY
👍
You could go the other way also and not have to worry your beams! 😂🤣
Hey thanks for commenting. By-the-way, you have a great channel!!! Cheers.
I get flashed ALL THE TIME hahaha (stock Rubicon)
Well now you know how easy it is the adjust the lights. :-). Cheers.
I think I pass 4 or 5 Jeeps everyday that I flash with my brights because they couldn’t take the time to do this.
Share this video with them!😉