How To Replace a 2018-2020 Honda Accord Side View Mirror | Quick 5-Min Install & Removal | ReveMoto
Vložit
- čas přidán 30. 07. 2024
- Where to Buy: bit.ly/2018-2020-honda-accord...
Follow along as we do a super quick mirror removal and install for the 2018-2020 Honda Accord side view mirror. It's much easier than you think! If you'd like to see anything else or have any questions, let us know in the comments below.
Source: www.revemoto.com
00:00 Introduction
00:46 Remove control panel
01:15 Remove door panel screw
01:35 Remove door panel
01:55 Remove mirror base cover
02:17 Tools needed
02:43 Remove side view mirror from door
03:11 Install side view mirror
03:31 Attach mirror to door
04:02 Attach door panel to door
04:38 Reattach control panel to door
05:06 Visit ReveMoto.com & thank you for watching
TOOLS NEEDED:
You will need a socket wrench to remove this Honda Accord side view mirror. It'll work for the years 2018, 2019, or 2020. To take off the door panel, you will need a panel clip removal tool and a Philips screwdriver. If you do not have a panel clip removal tool, you can substitute it using a flat-head screwdriver (just be careful not to scratch your car since it'll be more abrasive).
PROCESS:
Use the panel clip to uncover the screw hidden behind the armrest or window control module, then use a screwdriver to remove this screw. The interior piece is part of the door trim or behind the door panel. You will have to pull the door panel away, Door panels are easy and fairly simple to remove, just wiggle it out carefully, and usually, you'll have to pull it up to unhook it. The next step is to remove the speaker uncovering 3 screws holding the side view mirror. Using a socket wrench, unscrew the bolts and be careful not to let the mirror drop to the floor (that would be terrible!). Installing a Honda Accord mirror is pretty easy, especially if you just follow these quick and simple instructions. Using these simple tools, you can easily remove the mirror yourself.
This installation video works with several model options and features for 2018, 2019, and 2020 Honda Accord side view mirrors. Shop this Honda Accord painted mirror here:
bit.ly/2018-2020-honda-accord...
Replaces OEM mirrors with these part numbers:
WITH: Power, Heat, Blind Spot Detection | WITHOUT: Turn Signal, Automatic Reverse Tilt, Memory
-76258TVAA22 (Left, Driver-Side)
-76208TVAA22 (Right, Passenger-Side)
WITH: Power | WITHOUT: Heat, Turn Signal, Blind Spot Detection, Automatic Reverse Tilt, Memory
-76258TVAA02 (Left, Driver-Side)
-76208TVAA02 (Right, Passenger-Side)
WITH: Power, Heat, Turn Signal, Blind Spot Detection | WITHOUT: Automatic Reverse Tilt
-76258TVAA42 (Left, Driver-Side)
-76208TVAA52 (Right, Passenger-Side)
Follow us to check out what we're up to!
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
TikTok: / revemoto
________________________________________________________
#hondaaccord #HowTo #installation #revemoto #paintedautoparts #DIY
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
Thanks so much for the video!!!! Very informative, excellent on showing the steps instead of zooming through it. Did it with no problems!!!!
Thank you that makes me really happy to hear. Glad the video helped you get back on the road. If you need any parts for your car in the future keep us in mind. www.Revemoto.com
best instructions for the job
Glad the video helped out! If you need parts for your car go to www.ReveMoto.com
Easy ...thanks for the vid my wife broke her mirror coming outta the garage so ..yeah this was very helpful
😂Def get it, we hear this more often than you'd think. My wife sometimes records these vids for me, so in case she's reading these comments..this doesn't apply to her
Thanks for the video.
I have a 2006 Accord. Heads up for people with older models - the wiring snaps into the mirror just adjacent to the bolts that hold the mirror in place. Which means I was able to replace the mirror without removing the door panel. Which is awesome because I feel like any time I have to remove a panel I break or lose clips.
Thanks for the info! We're sure that will be helpful for a ton of people. Please sub if you haven't, it helps our channel grow! 😃
Thanks brother man helped a lot ! Got it done
No problem glad I could help out! If you need parts for your car in the future go to www.Revemoto.com
Thanks for the video, I had to replace my mirror and looked you up
Snap, very easy to replace from your advice
Thanks again!
Nice! Glad to hear it! Appreciate you watching and supporting. Subscribe to our channel, we're always trying to upload new videos so if you're looking for anything else in particular we'd love to hear it
Perfect. Thanks a ton
You're welcome!
Thanks for making the instruction video. Now I'm going to replace my side mirror, that just got side swiped
Did it work? Please let us know how well it went and sorry to hear about your mirror! Please subscribe, it helps us create more content! ✌
Nice!
Appreciate it 😎! If you need anything for your car go to www.Revemoto.com
Perfect video on how to replace my 2020 Honda Accord Sport side mirror that a tree took out while backing up. I was able to find the right color painted skull cap for my car. Does that cap just somehow snap onto the mirror assembly? And do you think an OEM skull cap would fit a non-oem assembly? If not I will just pay extra for the oem since it is probably worth the extra money. Hope u get to see this! Thanks for great video!
Hello! Aftermarket parts are made in OEM moldings. Some companies are better than others but the OEM should absolutely fit on an aftermarket mirror. Yes, the cap does snap on, so it's very easy to put on. Taking the cap off is a bit tricky but it's probably broken so you should have no issues. Thank you for watching and please subscribe, it helps us a lot! 🤘
Thank you very much!
You're welcome! Thank you for watching! Go to www.ReveMoto.com
Just put it on and it was so easy you saved me a lot of money. I appreciate it!!!!
Are there any extra steps required for the driver side? I know there is a trunk release on that side
Thank you! I got side swiped in a hit and run but only damage was the mirror. Doesn’t seem worth paying the deductible and I think I can handle this
Yeah it truly isn’t worth the deductible or increase in rates later. Go to www.ReveMoto.com
i ended up replacing mine with an OEM mirror complete assembly that came with the lunar silver skull cap. Install was a breeze after seeing your video.....BUT as I was picking up the plastic panel part that holds the passenger side push-button window button and door lock button, a spring dropped onto the ground! EVERYTHING seems to work fine without that spring, but I am losing sleep over it!
I could not tell if it actually came from that push button plastic panel, or maybe just dropped from somewhere else at the exact time I was picking up that power window button panel. The spring is about 1 inch long and as thick as a pencil. Have you or anyone ever come across a spring like that when working inside that door panel? Any ideas on what to check?
We're glad the installation went well! As for the spring, we don't know. It's good everything works but we can see how that would be nerve-racking. It's probably not from the window regulator buttons. That is often enclosed in one unit or housing. Does your door handle feel loose? I can't think of anywhere that spring would be useful except for the interior door handle. Please subscribe, it helps us a ton! ✌
Does the mirror need to be calibrated by the dealership? My mother in law thinks so. Thanks
This one when I took off did not. You’re maybe different. I checked functions and everything worked fine
Hello what are all the tools that were used to replace the mirror as well as the screws in the door was it just the socket
You will use a 10mm socket, screw driver, flathead. Let me know if you have additional questions. If you need parts for your car go to www.ReveMoto.com
@@ReveMoto great thanks so much
Will this also work for a 2022 Honda Accord?
It’s should be very similar. Go to www.ReveMoto.com
I ordered mine and installed but the blindspot didnt work
Oh no did you order from us? If you did call out customer service team at 281.561.5300
Where can we buy side mirrors for honda wrv 2023 model?
If we don't have it on our site yet, you can request it here: www.revemoto.com/pages/painted-parts-request our team will get back to you within 24 hours. And, let us know if you do a video on the install!