Neat design and well constructed. So nice to assemble when all your parts are laser cut. Only suggestion would be change the ball ends on your hydraulic rams (5:40), otherwise this will not last long. You have a stationary pin, through a ball end. What part is going to turn first? The ball on the pin, or the ball inside the end of the ram? Ball ends are great for connections that need to articulate in all planes. If you look at the ends on hydraulic rams on most excavators, they have a very large solid bushing with ground grooves for grease. There will be tonnes of force been transferred through this pivot connection. Keeping grease up to it will be endless.
This is awesome! Your a true engineer, fabricator, machinists, welder, designer. This was a joy to watch! Building my own fel and backhoe for my tractor is one of my goals. I subbed! I plan to watch all your videos.
very damn cool project. working with heavy machinery myself id recommend putting some grooves in the pins so they hold grease. makes it much easier to stay greased and to get grease in
I can see that you're very gifted at what you do. A great skill set. Your skills are critical for a good economy. A bit too complicated for me to build from scratch so just went out and bought a couple lol. Even though I build for a living and am multi skilled, I am very impressed with your skill set. Thanks and Cheers.
Congratulations on your work, I met your channel today and I'm already subscribed. I am an Earthmoving Machine Operator and Mechanical Technician by training. I really want to build my backhoe, I already have many details of the projects, but I don't have enough money and some tools to get started. I will follow the whole series. I believe it is ready, but I will find out as soon as I see all the videos. Good work there. Brasil / RS / Bagé. December,24,2020
sir... i think its time for you to start your own brand and compete with the big ones like caterpillars or jcbs... this was a magnificent journey of construction... great job sir.admire your hard work!💪🏼💪🏼
Always wanted to build my own digger you've made me realize it's a ton of work-me cutting all that heavy plate 10mm plus with a angle grinder it would take ages great job looks tidy as
Великолепно!!! Сам бы с радостью занимался нечто подобным, но в наших реалиях это экономически не просто не выгодно , а скорее фатально. Если конечно ты не миллиардер и это творчество твоё милое хобби...
Might pay to weld your loose bush's in to side frames. If they are a slip fit and higher grade steel then the body they will flog out the holes and you will need to replace bushes at some stage and probably line bore your side plates. Really need crush on those bush's in side plates. Also use shoulder bolts on pin retainers. As soon as wear sets in you will shear the bolts or they will get loose. I like that you have had a crack though very nice development if parts and execution on assembly.
For practicality's sake, it probably would have served you better if you made it rear-steer like a forklift. It's much better for accuracy, and given that most of the stress is gonna be placed on the front axle, it would make sense for it to be a solid non-steerer. It would likely be more stable as well. The only thing that rear-steer wheeled equipment isn't better at is driving fast, and I don't think you're gonna be doing much of that lol.
the best project I have seen until date..!!!..it's marvellous..!!...even I am working on the same project..!! Can you please provide with all the boom arm and bucket and stick measurements. Please.!!??
can you do like a simple trench cutter with big wheels for a swampy area that goes straight, but throws all of the soil on its 2 sides to spread it out more evenly?
Neat design and well constructed. So nice to assemble when all your parts are laser cut.
Only suggestion would be change the ball ends on your hydraulic rams (5:40), otherwise this will not last long. You have a stationary pin, through a ball end. What part is going to turn first? The ball on the pin, or the ball inside the end of the ram? Ball ends are great for connections that need to articulate in all planes. If you look at the ends on hydraulic rams on most excavators, they have a very large solid bushing with ground grooves for grease. There will be tonnes of force been transferred through this pivot connection. Keeping grease up to it will be endless.
You look superbly pro.. I enjoy to watch it.. Thks Buddy
This is awesome! Your a true engineer, fabricator, machinists, welder, designer. This was a joy to watch! Building my own fel and backhoe for my tractor is one of my goals.
I subbed! I plan to watch all your videos.
Amazing
very damn cool project. working with heavy machinery myself id recommend putting some grooves in the pins so they hold grease. makes it much easier to stay greased and to get grease in
Thanks!
yes, I noticed. It is a bit heavy to push in grease but it works. Groves next time 👍🙂
waaw 👍
Perfect work 😉
I miss the inside way for grease, but it is just my think.
Very good 👍
Класс,очень круто,мастер от бога!!! Very nice,good luck
Дай бог здоровья!Всё очень грамотно и аккуратно!
я думаю что это конструктор стрелы.у нас же ушли бы годы на ее изготовление..
@@_Anton_M это без компьютера.
I just found your channel, Wow great work, and Craftmanship, I subscribed for more
World Class , Absolutely amazing
I can see that you're very gifted at what you do. A great skill set. Your skills are critical for a good economy. A bit too complicated for me to build from scratch so just went out and bought a couple lol. Even though I build for a living and am multi skilled, I am very impressed with your skill set. Thanks and Cheers.
Thank you Robert :)
Increíble trabajo, eres un genio, y persistente!
Thanks!! :)
Yezzz mantapp
In one word: ingenious
GRANDE BRAVISSIMO
incredible .. i like it !!
Actually, I was planning to build one for my farmland. It's the best homemade excavator ever!!! superb
Thanks! :)
Your easier buy and old track machine that what I do
Dammit very impressive job kudos to you
Amazing 👏👏
Great piece of engineering.
hello cool tractor good project, I'm with you 👍 ✅ 📝 🚜
Congratulations on your work, I met your channel today and I'm already subscribed. I am an Earthmoving Machine Operator and Mechanical Technician by training. I really want to build my backhoe, I already have many details of the projects, but I don't have enough money and some tools to get started. I will follow the whole series. I believe it is ready, but I will find out as soon as I see all the videos. Good work there. Brasil / RS / Bagé. December,24,2020
I like these home engineers. You could trust their product are built to a quality that lasts more than the Chinese junk in comparison.
holy shit what a project
Aya cik siti anok tino mudo keno hati hati sekarey banyok boyo,duduk kacik gigi libah batey,xingat doh🤔🤔
bravooo 👍👍👍
Wow cool maskin
Man where did I go wrong, Working on Aircraft nothing like this Love this....
Как только слезу с дивана так и начну чего то такого...
Really amazing
those two links between the boom and dipper cylinder pins are pretty ingenious.
Im trying to figure out what they are for..
Sangat sangat bagus dan hebat. Good jobs and perfect..
sir... i think its time for you to start your own brand and compete with the big ones like caterpillars or jcbs... this was a magnificent journey of construction... great job sir.admire your hard work!💪🏼💪🏼
Thank you sir 🙂🙂
Man i wish i could hammer that fast lol good build
Try meth...lol
just dam cool
👍👍👍💪💪💪👌
I love job it so cool
Bravo
Great quality love it. Ps first time i see a dremel in use building a real excavator 😉
👍
What comes to mind is....just because you can, doesn’t mean you should
now I know what I need in my workschop. CNC plasmacuter
Always wanted to build my own digger you've made me realize it's a ton of work-me cutting all that heavy plate 10mm plus with a angle grinder it would take ages great job looks tidy as
Thanks 🙂
Nice bro
🚜👍👏
Bravo 👍👍
Великолепно!!!
Сам бы с радостью занимался нечто подобным, но в наших реалиях это экономически не просто не выгодно , а скорее фатально. Если конечно ты не миллиардер и это творчество твоё милое хобби...
Это точно подмечено, но делает красиво,👍👍👍👍!
good work
Emazing
Good job
👍👍👍👍👍👍👍🚜🚜🚜
Молодец.Лайк
Красавела!!!!
เยี่ยมมาก
Fantastic build. Evident that you are in excavator manufacturing. Perhaps a little instruction on welds in high cyclic loading areas.
diseñas y fabricas maquinaria, que sueño hecho realidad mas hermoso
Класс !
You are a genius bro
Might pay to weld your loose bush's in to side frames. If they are a slip fit and higher grade steel then the body they will flog out the holes and you will need to replace bushes at some stage and probably line bore your side plates. Really need crush on those bush's in side plates. Also use shoulder bolts on pin retainers. As soon as wear sets in you will shear the bolts or they will get loose. I like that you have had a crack though very nice development if parts and execution on assembly.
good points 👍
Häftigt! Bra jobbat!
Tackar 🙂👍
For practicality's sake, it probably would have served you better if you made it rear-steer like a forklift. It's much better for accuracy, and given that most of the stress is gonna be placed on the front axle, it would make sense for it to be a solid non-steerer. It would likely be more stable as well. The only thing that rear-steer wheeled equipment isn't better at is driving fast, and I don't think you're gonna be doing much of that lol.
Вот это да!
КультурА!!!
👏👏👏👍
Wow great I like you
looks easy:P
Супер.Классно получается.
👍👍👍👍🇸🇾🇸🇾🇸🇾🇸🇾
the best project I have seen until date..!!!..it's marvellous..!!...even I am working on the same project..!!
Can you please provide with all the boom arm and bucket and stick measurements. Please.!!??
Hi and Thanks 🙂
Look at he description in this film for more info:
czcams.com/video/hdvX4mEjW6w/video.html
@@AlfaSeven thank you very much sir..!!!..this will help a lot..!!! 😊🙏😇
you just need to add tracks :D
🙂👍
What were you doing at 6:30? Heating the arm?
Is that the same yanmar they use for APUs on semis? Sounds the exact same
can you do like a simple trench cutter with big wheels for a swampy area that goes straight, but throws all of the soil on its 2 sides to spread it out more evenly?
⭐⭐⭐⭐⭐
Золотые руки 👍
So did you design this also or was it a kit you purchased?
It is my design :)
окей
軸的左右兩側鐵套也需要打黃油
怎會有小怪手臂的等比例藍圖?(以前是工程師)?
一般人第一次 一定會把角度大小尺寸搞不定
用大方鋼管即可,因為車身本體結構太弱
每個關節插梢三點都需要打黃油.不然就直接焊大軸承座即可
that looks super expensive. not sure why you would make this but its cool.
Hi guys I was asking which software do you use to design such things, I mean to like design a drawing of the machine you want to build
Hi,
Most 3d cad system will do the job. Rhino 3d is simple and very good.
Good thing you blured out your license plate. Somebody might find you to come there and shake your hand.
are not to heavy that arm?
Du bygger ingen maskin😂 det är perfektion💪🏻
Толщина тестов стрелы??? И щёк?
А не проще купить готовое? Там и прощитана нагрузка и сварено нормально. Для самоделки дорого и непонятно как оно поведет в работе.
Добрый вечер. Трактор супер! Кто может подсказать где чертеж можно увидеть. Заранее спасибо.
Круто, я очень рад что есть люди не боящиеся трудностей. Ооочень круто. Успехов. Я
how come you dont need some way of axially retaining all those shafts that the bushings ride on
6:28 shaft fastening
How much cost for it
Videonya terlalu rinci itu jadi lama nontonya....tolong dong dipercepat atau bgemana biar gk kepanjangan
Tpi bagus....
Make a aircraft!
Dags att bygga en midjestyrd frontlastare grabben
Haha vem vet, det finns så mycket bra ha saker att bygga
Он что, из люминия?
Baiya aap na kaha sa ya saaman kheereda please mujha vol do
สั่งซื้อราคาเท่าไหร
Hola buenas noches
You have very expensive hobby 😁
Price
Please give me the details of cylinder and pump n motor please please sir
Hi, Only have on the cylinders:
www.olssonparts.com/se/sv/utrustning/hydraulik/cylinder/cylinder-std/cylinder-med-ledlager/P-506-63-32-/
As an initial comment on video editing, so far I love it, but the scrolling text is distracting. It can work without any text at all.
At 2:40 I absolutely love the suspense of seeing what you're making.
The pin tapping around 3:00 does feel like it's dragging on a tiny bit
At 4:11 it feels like you jumped ahead a whole lot
The motion video from one spot to another at 6:20 is great!
The CAD inclusion is epic at 7:02