Tinting a back window step by step using a plotter
Vložit
- čas přidán 18. 10. 2019
- tinting a back window step by step using a plotter. long video.
Products used below...
Go Doctor
www.filmhandler.com/collectio...
Hard Card Peach
www.filmhandler.com/collectio...
GCC Plotter
www.filmhandler.com/collectio...
Yellow turbo
www.filmhandler.com/products/...
NT Knife
www.filmhandler.com/collectio...
Film
www.solargard.com/
I been tinting for over 25 years this guy is still learning I can tell ! I see a lot of rookie moves
Thanks man check out the newer videos.
Quick question though why you watching tinting a back window step by step?
I shows you know your trade!!💪
Where’d you get the tint board at?
The window was dry but the film was wet from when you cut it on the peel board? Or did I miss something?
Where you get that cleaning squeegee ???
At filmhandler.com you have to buy the handle and the channel separately.
Is 36 inch wide roll worth on plotter?
So at this time I had 40in plotter GCC VLX 40in. Most window tint is under 40in but for some vehicle you will need a 60in roll. I now have a 72in GCC VLX plotter and the 40in. I use the 72in mostly for PPF paint protection film. Starting off I would still go with 40in but if you start getting into the PPF side you will want something bigger. Hope this helps.
Hey what speed and force do you use for the plotter?
30g down force regular film, ceramic 80g, speed 5 and speed 3 on ceramic. Cutting software also adjust the speed.
pro trick : you can watch movies at Flixzone. Me and my gf have been using them for watching lots of of movies these days.
@Pierce Nikolai yea, I've been watching on flixzone for since december myself :D
what tint do you use if you dont mind me asking
I normally use Solargard Gard Film Supreme, VortexIR and Xenithir. The computercut software is awesome and the film is great haven't had no issues with it.
@@m2mdetail781 i just ordered tint tek 20/20 to see how it works and my plotter i only payed $800 for it so hopefully it works its a sk-1350 thank you for the reply
@@Lexaniortiz1986 oh nice brother! Make sure you got some roland blades and start low on the down force and work your way up to cut the tint. Let me know if you have any issues I'll try to help you out 👍
@@m2mdetail781 thank you man i really appreciate it i might need somw help cause im new with the machine
Great video joy or baby shampoo??? 😄
I have been using tint slim lately but normally joy and baby shampoo for my paint protection film.
@@m2mdetail781 ok joy and baby shampoo mixed together ???
@@JBIRD575my bad I mean I use joy for window tint normally. I use baby shampoo for paint protection film.
@@m2mdetail781 thanks I subscribed