EPIC 3D PRINTER FAILS (TIMELAPSE) / OCTOLAPSES)
Vložit
- čas přidán 26. 11. 2020
- Buy a printer that wont fail here: bit.ly/3oKdmpq (affiliate link) Whether you're an experienced user or a beginner 3d print fails are almost unavoidable. Here are some of mine. AD: Check out the TaoTronics mesh router here: www.taotronics.com/products/t...
Affiliate links! these help me out a ton :)
You can buy 3d printer here: www.creality3dofficial.com?sca_ref=18182.b8VmzA4qZU
You can purchase the ultistik magnetic bed system which i highly recommend here: www.filamentone.com/collectio...
MUSIC:
Sundown Drive by Ghostrifter Official
/ ghostrifter-of. .
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/-sundown-drive
Music promoted by Audio Library • Sundown Drive - Ghostr...
#octolapse #ender3 #printfail
***Full Disclosure: taotronics sent me their mesh wifi router in exchange for a 30 second ad read. - Věda a technologie
What's your worst print fail? How many hours of print time did you lose?
mine was print in place gearbox that took like 14 hours
1 day 15 hours worst part was it was for a school project and I didn’t have enough time to do another
@@outofammo2446 that's terrible :( i've never lost any print over 24 hours but i feel your pain. thanks for watching
@@tadplayer687 ouch! sorry for your loss :(
Thanks, you've shown duff prints before, few channels do.. I remember someone said 3D Printers should be called, 'disappointment machines'..
It’s nice to know I’m not alone
Way
It happens to me so much idk what to do I’ve tried everything
I always thought that these cool channels like had perfect prints everytime and mine were failing so much it does feel nice to know I'm not alone phew
Yes there are 7 bilion people in the word ;)
Yeah, I have 3 ender 3s and it's a good 60/40. Print requirements vary greatly from print to print, and this usually causes issues. Changing resolution or the size of the print can cause failures. Looking at it too hard, having happy thoughts.... All these things will cause failures😝😂 Biggest thing is to clean/glue your bed for that first layer to stick well. But you don't see me uploading failures because I want it to look like I know what I'm doing😎😝 but as someone who prints, I enjoy watching failure videos more than reg time lapse.
should def do more of these. lets everyone know its not always daisy's and roses
i absolutely will! thanks for watching!
So sad yet oddly satisfying to watch... absolutely love the camera angles and quality!
I know it's not the focus of the video, but these filaments are gorgeous, and what you were attempting to print looked impressive! Do you think you could start sharing links to the filaments you use and the prints you make? I understand if some of the prints are paid files, but I'd still like to see what the finished ones look like
I understand how hard you've done so far. I love so much your timelapses
My kids love your videos. They say they're so satisfying especially before bedtime. 💪🏾💪🏾💪🏾
Could watch these on repeat 24/7 😁
Encouraging to know even someone like you has failed on occasion. My worst fail was while using Wood PLA for the first time, my printer jammed up and smelled like a forest fire in my house. The printer was never the same and it really did a number on the whole thing. Months later I finally diagnosed the cause being the heatblock fan was reversed and not properly cooling the heat throat and the PTFE tubing was getting too hot and causing the filament to expand and jam or under extrude. Once I fixed that, my printer was as good as new or even better seeing as I had replaced a ton of other parts trying to figure out the source of all my problems.
Ah yea. The dreaded sphaghetti
My print failed as I was watching this. :(
F
@@imps1894 F
F
F
When a print fails, i use the spaghetti (extruded plastic)as a scrubber in my kitchen. Works like a charm every time 😅
Watching these is a guilty pleasure of mine, not because I like watching hard work go to waste, but because I think its really funny when the whole thing just goes flying and looks terrible all of a sudden
One great thing about your videos is the clock in the background ty for that!
I always managed to be closeby and fix the delaminated parts with painters tape :D
Very cool spaghetti! 👍🤣🤣
never forgetti
2:15 this Oof sounds its funny and this 5:05! 😂 continue with such sound 👍
How many hours?? No idea..around a week in time lost..endless lessons. Thanks for showing the struggle bro
One could also call it 3D Printing Nightmares :D This video is so different from all your other super satisfying videos! But I really like it! I'm following your channel for a while now and I am super impressed by the quality of your prints! I've got an Ender 3 too, but in the 2 years I have it now, I was never able to archive such a print quality - could you may tell me what slicer you are using? Thanks a lot and have a great day! ~ Robert
Even your fails are satisfying to watch! Do you not use the Spaghetti Detective plugin for Octoprint btw?
Most problems from not good adhesion and from Timelaps!
How from Timelapse ?
It's so cool how the fibers materialize like that
I admire how good is yours video edition, and of course the slicer profile in all yours printers, so clean and perfect, please share a video how test the accuracy of a print, best regards from Argentina
You could become an italian chef with the amount of spaghetti you made.
the mark of humility :)
Watching the 3d print get printed is simultaneously the most and least satisfying thing I've ever seen.
Another name for this vid shot on phone meme 3D printer edition 😂
I really don't understand how you manage to actually break the part you're printing so often. Especially impressive they don't just pop off the build plate.
Cool Vid as always, could you please also provide the links to the failed print files as you did with the successfull ones?
Very good
Hi, great video.
Thanks for sharing.
What do you do after each fail? Do you change any settings and try again?
Thanks
I love these vids please keep them up. Can you print on the Artillary sidewinder x1 if you have one?
Yeah! I just received the latest x1 and I’ll have a bunch of content for that shortly!
This is the worst nightmare you can get if you make 3d models
Hello it's awesome, sorry what camera do you use in the octolapse, congratulations on your work
This hurt us all ... :(
Successes !!! ... and ... Thanks for sharing :) :) :) :)
:) thanks for watching
i like how it has no failure detection and proceeds to create vermicelli noodle dish.
So much pain... Understand you...
Was printing a Voronoi vase, and after 20h figured out that overhangs are awful. Print head broke away some parts of the print.
yikes! pro tip for voronoi vases scale them on the z axis non uniformly to reduce overhang angles! ;)
Even the fails look great what slicer do you use
I've had a few prints fail on me, but I've never had one break
Today I had my first spaghetti monster in a long while. Just in time for this video.
As someone with 3 Ender 3s, I find these more fun to watch than reg successful time lapse. 😝😂 Everyone has the great successful prints, but don't wanna show the true ugly side of wasting filament. 😝
The Spaghetti Monster can strike any time, anywhere😂😂
When you least expect it 🍝
The noise at 2:15 got me :D
What type of filament are you using in all your videos?
Because it seems quite different from others !
What makes watching this video even more painful is knowing that a hefty portion of the time on these prints is all dedicated to the timelapse itself, moving the print head out of the way. Big woof.
The tentacle monster comes for us all
Supports my dudes, use 'em.
THE SECOND ONE GOT ME
I didn't know it could go wrong like that, what is the cause of those malfunctions? And what do you do with the failed pieces? Can you remelt them ?
Nah the printers just giving the creations a dope hairstyle
How do this situations apear ?
Hardware fail ?outside factors (heat/wind)?
Error in the program ?
Okay so, i got a 3D printer for Christmas yk and i tried making a dumpling 🥟 like the round ones and i left it for 5H and i wake up to NO DUMPLING all i see is a round flat circle and a big thick smear on top. I thought i would die bc my father got that for me- but luckily, its fixed now and I’m making a “mooncity” it takes 22H and yeah it’s halfway done and here are some facts ig.
“Is it safe to leave a 3D printer overnight?” Yes, it is possible depending on how big the item or file is, some files don’t work from some webs, and depending on your printer kind. I do have a “AnyCubic MEGA X” and actually my father got me a pro but someone gave us a MEGA X, well someone got fired ;-; and trust me you should get a 3D printer like you don’t even have to pay for the crap you make, plus it helps you to be patient. I mean I’ve sat right next to my 3D printer for five hours I’m not joking, just to make a fox.
I got this too. How did you setup the camera for timelapse
What causes the random “growths” on the orange vase at 1:46? Having the same issue and can’t figure out the cause
The best of Italian food! 😋😋😋
i felt that last one haha
The first one tho be like Uraraka when she be out of money lol
I have used Octopi to control my 3D printer. How do you like Timelapse? I use the other time lapse, but it does not home the head on each level. Do you see that reducing the quality of the print of the layers? Why do you feel some of the larger items failed at the bottom and snapped off? Head collision?
Yeah head collision from slight overextrusion! yeah octolapse diminishes print quality due to the long retractions.
I'm thinking about getting into 3d printing is their anything u can do when a print fails or do u just have to start again and accept the loss?
I am a bit curious of what kind of camera you are using.
What filament do you use? I'm about to buy new filament here in Europe.
All my prints fail, I can't get anything to stick to the buildplate, etc. So frustrating.
What is the price of the 3D printer that you brought
1:05 what model is this? It looks awesome
I am curious what the one at 3:14 was supposed to be. Well, before it completely fell apart into filaments.
this is why i alway use the brim or raft for bigger print
That’s why we need build plate adhesion.
Pls do vid how to improve your 3d prints
How long does it take to make one thing from a 3d printer
I dont own a printer, but dang this hurts.
0:26 Hey you are from Wham Bam Tesla Cam? haha
im happy to find out that im not the only one that prints spagetti sometimes
What do you have your z-hop at?
This hurts to watch 😢
Which camera are you using for this?
Although it's a shame your prints failed, I've gotta say it's a relief to us mere mortals that masters have it happen to them too😆😆
Is there any way to reuse the wasted material to print more?
I don't know very much about 3d printing so can you please explain why these fails happened?
what do you use for time lapse ... and camera settings
Have you never had your complete hot end covered in filament?
Yeah, I work as a CNC programmer and people also think it's simple, you just draw something and machine will magially do it, I guess it's not that simple even with 3D printers and people who program that have to think about that more than just to draw 3D model and click on print. 😀 I am thinking about buying some 3D printer, is it possible to send these fails back to filament manufacturers to recycle it or you just throw it away?
This hurt my heart lol I've been there.
Which slicer do you use ?
Where'd you get the zoidberg model?
Do you recommend an ender 3?
Can I ask you your ender 3 print settings?
I love how as soon as it gets bent it's just like h a i r
what causes the last one?
What's the reason for fail? Is it design or printer itself?
What camera are you using in video ?
Some of these i can lean back and internet expertly go "oh yeah that's what happens when you don't use a support structure"
But man, I'm really just trying to cope with the raging pain these fails can give you
Just hours into the print one tiny thing
ok, glad im not the only one LOL
The good news is: The Spool of filament is now much longer. The bad news is it has horrible wrinkles and a lower diameter.
Its still satisfactory
thanks Simon!
Could this be the forbidden spaghetti?
Someone tell me is all this filament lost or is there a way to recycle it
How do you print all that without supports?
Hey I have no idea what's going wrong in here any explanations for why this happened??
You can make internal structure.
Grazie, è bello sapere che non capita solo a me!!!
This is really cruel to watch 😭
sorry!