Top 200 BEST 3D Prints with Satisfying Timelapse | Recap 2023
Vložit
- čas přidán 28. 12. 2023
- On this video we compilated a Top 200 BEST 3D Prints with all videos of the year 2023 and Satisfying Timelapses.
Contact for partnerships:
✉️ mrkennedy3d@gmail.com
#3dprinting #timelapse #compilation - Věda a technologie
👇🏻All files used in this video: 👇🏻
First of all, just a brief explanation... When we started the channel we were also very beginners in the world of 3D printing, nowadays we give credits in the video and also in the subtitles to all the artists, unfortunately with beginners we don't do it, so some links we missed 😕
I'll include all the links I have saved, but on ThingiVerse you will certainly find pieces similar to all the ones we make here by searching by name. Thanks for understanding, if you know of any STL that isn't here, send it to us, I'll be happy to add it to the list 🙏🏻
Now, links below 😁(reply to this comment)
Compliant Mechanism Blaster
www.thingiverse.com/thing:6242990
Target:
www.thingiverse.com/thing:613562
Hand Granade
www.thingiverse.com/thing:1281789
Glock
www.thingiverse.com/thing:3867556
Glock Console
www.thingiverse.com/thing:2469412
Revolver Cylinder Pen Holder
www.thingiverse.com/thing:1459657
Puzzle Bullet
www.thingiverse.com/thing:43672
Flower Vase:
www.thingiverse.com/thing:2795194
Moon Candle Hollow:
www.thingiverse.com/thing:6240327
Bag Holder:
www.thingiverse.com/thing:26767
IronMan Pencil Holder:
www.thingiverse.com/thing:4772535
Trash:
www.thingiverse.com/thing:4725064
Door Handle:
www.thingiverse.com/thing:4619895
Adjustable Phone Holder:
www.thingiverse.com/thing:4982411
Stand Glasses:
www.thingiverse.com/thing:3655764
Nether Portal:
www.thingiverse.com/thing:6165577
The Warden:
www.thingiverse.com/thing:4745014
Enderman:
www.thingiverse.com/thing:2702780
Slime:
www.thingiverse.com/thing:940429
Minecraft Spider:
www.thingiverse.com/thing:683706
Creeper:
www.thingiverse.com/thing:2439886
Fox:
www.thingiverse.com/thing:4840456
Axolotl:
www.thingiverse.com/thing:4878486
Toilet Roll Sisyphus by SerenityRanch:
www.thingiverse.com/thing:6287835
Mini Bic Lighter Case inspired by a popular toy brick by DevonRogers:
www.thingiverse.com/thing:6287082
Knurled Twist Container with larger inner space by SEA17:
www.thingiverse.com/thing:4366929
Parametric Card Box by Roguenorm:
www.thingiverse.com/thing:3072760
Q-Tip Swab Dispenser by RockyMtnMark:
www.thingiverse.com/thing:4876487
Tire Pen Holder by caseys_graphics:
www.thingiverse.com/thing:6301248
USB Cable Reel by manabun:
www.thingiverse.com/thing:2856991
3x and 4x AA Battery Case (Box) Eneloop by k-eye:
www.thingiverse.com/thing:4073130
Chubby T-Rex Dino Pencil Holder / Pot / Container by IK3D on Thingiverse:
www.thingiverse.com/thing:5927848
Scorpionz... with Rotating Tail and Pincers that Nip! by muzz64 on Thingiverse:
www.thingiverse.com/thing:1001286
ANYCUBIC FLEXI PRINT-IN-PLACE ALIEN by FLEXIFACTORY :
cults3d.com/en/3d-model/art/anycubic-flexi-print-in-place-alien
Working Cannon by makkuro on Thingiverse:
www.thingiverse.com/thing:5421331
PS4 Dualshock 4 Controller Holder by Metzhara on Thingiverse:
www.thingiverse.com/thing:3082825
Succulent Planter / 3D printed planter / Legged Planter by p4zR on Thingiverse:
www.thingiverse.com/thing:2677108
FLEXI TORTUGA by Krear3D on Thingiverse:
www.thingiverse.com/thing:6312626
Flying Night Dragon by Sevro :
www.printables.com/model/404447-flying-night-dragon
Binge Watcher's Popcorn Bowl by ecoiras on Thingiverse:
www.thingiverse.com/thing:4586463
Ghost Pacman Planter by Chaolinx on Thingiverse:
www.thingiverse.com/thing:1957674
Hand Can Holder by ryan5sampson on Thingiverse:
www.thingiverse.com/thing:6315041
Karate Phone Stand (More angled) by Littlefiver on Thingiverse:
www.thingiverse.com/thing:4722236
Big StrawGlass - Practical by bLITzJoN on Thingiverse:
www.thingiverse.com/thing:1483266
Parametric Squashed Mouse Door Stop Wedge by iamburny on Thingiverse:
www.thingiverse.com/thing:418207
The Rocktopus (The Rock + Flexi Octopus) by DanielCazar on Thingiverse:
www.thingiverse.com/thing:5151852
Cookie cutter:
www.thingiverse.com/thing:3194573
Shot dispenser by Littleroot3d on Thingiverse:
www.thingiverse.com/thing:4540111
Happy New Year 2024 by FiveNights on Thingiverse:
www.thingiverse.com/thing:6309208
Beer Tray by Atelier Vcube:
www.myminifactory.com/object/3d-print-food-platform-for-beer-89860
Bottle Ant Roll by WDonders:
www.printables.com/model/266438-bottle-anti-roll-stops-interconnectable
Circular Beer Bottle Carrier:
www.printables.com/model/6266-circular-beer-bottle-carrier
Smart One Handed Bottle Opener by Kart5a:
www.thingiverse.com/thing:269463
Holiday Party Cocktail Stirrers - Swizzle Sticks by barb_3dprintny on Thingiverse:
www.thingiverse.com/thing:4021766
Beer Bottle Lock by benjaminedwardmorgan on Thingiverse:
www.thingiverse.com/thing:628847
Celtic tree book bookend by McKwad on Thingiverse:
www.thingiverse.com/thing:4838416
I just started printing 2 weeks ago and it's really a step-by-step learning on how to do it. A lot of wasted time and filament hehehe...but it is a learning journey for now and I hope I can print someday just like what I am watching now. Very inspiring and motivating video that made me more excited to delve into this craft. I thank Jesus Christ for awakening again the talent he gave me that I had forgotten for so many years. Thank you, Lord, for your continued abidance and graces to all of us our children.
Hey! We are very happy that our content inspires you to study and become a professional in this vocation, but more inspiring than any video is your comment! Many blessings to you and your family, God guides and illuminates everything we dedicate our time to, you will be rewarded for your effort and kindness 😁🙏🏻 Have a nice day!!
Lot of work putting this together! Thanks!
Really is, but it's worth it 😁 Thanks for the comment! Have a nice day 🙏🏻
Happy new year cant wait to see this channel grow
Happy new year for you too 🎉 We are looking forward to this growth, but we will always recognize your spongebob icon here in the comments which is with us even before the 1000 subscribers hahaha 😂😁
🤣😁🥰@@mrkennedy3d
I've watched a few of your videos now, we have the same printer, essentially, so it's nice to see some cool prints coming out et al.
ABS REQUIRES a controlled heat environment - you need to get an enclosure if you want ABS to properly stick and not split like you see it so often on yours.
Get a PEI magnetic plate - you will LOVE the results and ease of removing prints from the plate.
If you want to print with a super smooth surface. Use a glass plate, and to remove the parts, put the plate and part in the freezer for about 5 minutes. The part will fall right off without any effort, and the surface on the build plate will be mirror smooth.
Other than that, hope to keep seeing these wonderful time lapse videos! They're great ASMR to go to sleep to, as well as just watch in general.
Thank you very much for your comment! We face challenges and we recognize them, sometimes I receive criticism (not so nice 😅) on CZcams, but it's great to receive advice that adds to our channel and is as kind as yours!
It's a good printer, the ideal would be a structure around it to actually use ABS, Brim has been our alternative against detachment but it doesn't always prevent cracking... We're investing more in PLA, here in our country it's not as affordable but that's what makes up for the ABS headache right 😂
I also like watching timelapses to sleep, especially those of plants growing hahahah I'm glad our videos are relaxing too!! Thanks for the tips about plates, have a great day and week 😊🙏🏻
@@mrkennedy3d Hey no problem! Love to see a hobby of mine growing so much as it is. My wife has enjoyed watching your videos as well. I don't know what country you're in, but I know in several countries VoxelPLA is one of the least expensive good brands of PLA - get PLA+, it has small additives that help with some of the downsides of PLA in general. If you want ABS quality (ALMOST) without a LOT of the ABS headache, PETG is amazing, though it is a stringy pain - I try to print one part at a time with it.
The whole thing about ABS is that it needs the entire part to maintain similar temperatures so that the new layer being laid down sticks properly to the last layer and so on. having it cool in an open print environment keeps ABS from sticking which is why you get the warping and cracks.
Keep Printing!
@@mrkennedy3dBrasil? 😅 Suspeito pelo livro do Harry Potter..
@@AndreLuiz-bg3dr Sim!! Somos do estado de São Paulo haha todo brasileiro que chega aqui reconhece por algum elemento 😅 Fazemos tudo em inglês pra atingir um público maior, mas a gente se reconhece em todo canto do mundo né? Boa segunda pra você!! 🙏🏻😁
This video mustve taken a long while making, but it is worth while ,I really enjoyed it.what speed are you printing at ? Thank you
I confess, it is really time consuming 😅 But the end result is worth it! We're glad you liked it, regarding speed, we usually do it at 60 mm/s
Have a nice day 🙏
Again Congrats on 1k
Thank you friend!!! 🙏🏻
bonsoir je voudrais quel colle vous utilisee pour PLA ET AUTRE SVP
Olá! Parabéns pelos seus videos... Essa impressora do video é a Ender 3 (sem v2, v3, etc)? E outra curiosidade: Vocês são brasileiros não são? Rsss
Abraço de Osasco/SP
Opa amigo, tudo certo? Somos sim, somos de São Paulo também, divisa com Sul de Minas😁 Fazemos tudo em inglês pra alcançar um público maior, mas todo brasileiro que chega aqui reconhece algum elemento e identifica que não somos de fora kkkkk Nossa impressora do vídeo é uma Ender 3 V2, hoje em dias nos vídeos atuais usamos uma Neptune 4 Pro, bem mais automatizada, mas a Ender foi uma ótima porta de entrada, ainda está aqui com a gente mas usamos mais a nova, fizemos unboxing dela aqui no canal!
Tenha uma boa noite e boa quinta-feira! Será sempre bem-vindo por aqui... Abraços! 🙏🏻
@@mrkennedy3d Show de bola! teve uma época que eu ia de Barueri para Itavepa, ao lado de Extrema/MG toda segunda-feira a trabalho.
Parabéns pelos videos. Vou me aventurar nessa empreitada 3D e estou estudando ainda, mas logo pretendo iniciar
Abraço e sucesso sempre!
Can you please guide me which 3d printer is best under 240 dollars? And how was the creality 3 v3 ? .
And which filament used to make that type of products ?
Hey! How are you?
Look, we've only had one printer so far, so we're actually not the best person to suggest anything haha About our printer, it's an entry-level model, it's good value for money and everything we learned from it, but it has its challenges Because it is quite "manual", it has few automations compared to other more recent printers, so when a problem happens it's just you and her 😂😂😂
Regarding the materials, we mostly use PLA and ABS (this works better in closed printers but the price is more affordable so you can make a structure to close the ender), but there are several others, the one they most recommend to us here on CZcams is the PETG...
I recommend that you watch printer reviews, we watch this type of content a lot, there are very good channels that will help you!! Have a nice day 1, have a great week 😁😁
best place to start is the ender 3, everyone does. if you are just starting pla is the best stuff to start with once you really start printing your find some that you like and others dont. sunlu is a cheap pla and it just works my favorite pla is overture and the v3 is a great place to start if your looking to just get printing good luck and happy printing
Can not find that Celtic Tree Bookend, can you give us an url for it? Thank you!
Hey! Of course, here it is 😁
Celtic tree book support, bookend by McKwad on Thingiverse: www.thingiverse.com/thing:4838416
Great video as always.
Can you write more informations about the filament that you print? company-name at least
Thank you 🙌🏻 I answered you in your previous comment!
Nice video, you should print one of my models one day :)
Nice! Thanks for your comment 🙏
great vid. could I get the link to the grey smartphone holder @28:38 please and ty
Heey! Here the link 😁 www.thingiverse.com/thing:6199035
How do you do your time-lapse? I know Bambu has a nice one built in but I haven't seen it done with an ender before.
Hey! We use a Beagle Cam V2, it is connected to the printer and then gives commands for the timelapse to happen, then we download the video directly from the camera system 😊 The link to all our equipment is in the description! Have a nice day🙌🏻
@@mrkennedy3d Awesome, thank you!
The 6 min mark whats the print with the phone called? Thank you & awesome prints
Hey!! Is this portal 😊 www.thingiverse.com/thing:5882960
Congrats for the 1k sub! Amazing videos, keep it up😉😉
Thank you so much, its been a really gift in this end of year!! Have a happy new year eve, blesses for you and your family 🎉🎊🤩
You shouldn’t need brims on your prints. I use the same printer slightly modified and only use brims on tiny objects. Use a skirt of 3 lines just to ensure full filament flow. It saves time and wasted filament.
I'll be honest that because we use ABS in an open printer we often had problems with detachment, brim has been our ally, but we are learning how to make prints without it! We appreciate your comment and advice, have a nice day 🙏🏻😊
As grant from 3d Musketeers always says if you love a print then you need to put a brim on it.
@@Manning.mermaidgirl hahaha love it 😂
That's a lot of prints. Do you still have the link to the grenade? Thanks
Hey! Yess i have, here 👉🏻 www.thingiverse.com/thing:1281789
How do you not get alot of supports, I have the same printer, can you elaborate?
I'll be honest that we don't have some techniques, in fact we look for models that don't need support, the others we try to do without, sometimes it goes wrong 😅😂 but it's trial and error!
As a newbie, I'm really inspired by these but cannot see the links to the models. Can you please advise. Thanks
For sure! Which link do you want?
take the key caps off your keyboard and throw them in a cloth bag then in the dishwasher
Thanks for the tip 🙏🏻
Why would anybody want to do that?
Can I get the link for the first flower vase please it’s the first print in the video.
Of course! Here it is 👇🏻
Giroid vase by Area3d on Thingiverse: www.thingiverse.com/thing:4899605
HAPPY NEW YEAR 2024..!!
Happy new year 2024 friend!!! 😁🖤
Thanks for doing this, but time stamps are our friend.
Hey, we know this, it's a challenge to score the two hundred pieces 😂 I need to set aside time to do this! Thanks for the comment 🙏🏻
hey man, you gotta stop misclicking the button when you choose between ABS and PLA.
You are right! This video is a compilation of parts from last year, we were having a lot of difficulties with configuration, nowadays we have a new printer and we also calibrated and adjusted our Ender, our current prints are already much better, we try to improve a little more every day Thanks for the comment!!
but are you using abs? (just a question)@@mrkennedy3d
Hello guys, we prepared this video with all the productions of the year to celebrate OUR 1.000 SUBSCRIBERS!!! 🎉🎊🎈✨
This number has been our goal since day one, it is impossible to explain how happy we are, thank you all for your support, comments and advice, without you this dream would not be real. Happy New Year!! 2024 will be amazing 🙏💙😁
Oh, one more thing. if you don't want to do an enclosure - use PETG. MUCH more forgiving than ABS, doesn't have that awful smell, a bit stringier, but it also prints almost as easily as PLA
hot take: the kitties steal the show lol
Always!! hahaha 😂🙏🏻
I wouldn't use a scraper on your bed. It can damage it. Just wait for it to cool and bed the sheet to pop it off
We actually use it in our older videos! This is a compilation so some habits we no longer have, living and learning 😅 Have a nice day!!
you dont have any links for them ?
To be honest, I have them all, but if I make a list of all 200 STL, I won't finish them until next year 😆😅
but tell me wich STL you want and i send here! 😄
aa yeah some thing bad had just happened to a kennidy🥳🥳🥳🥳🥳they did say "nothing bad ever happened to the kennidies" but big butt i said that something bad would just happened to the kennidies🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
1:21
Warranty void .take it off the printer to remove.
what printer is this?
Ender 3 v2 🙏🏼
STL of dinosaur phone stand and cura settings for print pls
Here 😊👇🏻
www.thingiverse.com/thing:2646317
resolution 0.2
Infill 20%
Speed 60 m/s
Should toss in the links for the prints
Hey! Which link are you interested in? 😊
@mrkennedy3d the shark benchy please and thank you. I really enjoy your content. Will you do any lives ?
👀
For the helicopter you need to pull not push
I found out after making this video 🤣 We were warned a few times haha Thanks for the comment!
i like how u include the fails. it makes me feel better about my printer
Working with 3D printing means always dealing with failures, right? 😅
Sorry, but I don't think it's ideal for the printer to hit the mat when taking off the printout
It's really not correct! As this is a compilation of all videos some of them are older, at first we did it wrong but we were advised in the comments and now we don't do it anymore.
Have a great New Year's Eve!! 😁🤩
You dont need to use that scraper, you're gonna destroy your surface. Wait for it to cool and it'll pop off or use a capful of 99% isopropyl alcohol where the print meets the build plate if you're in a hurry....
Hi! As this is a compilation of all our videos from last year, our first mistakes are at the beginning of the video hahaha in our current videos we no longer do this, we even have a new printer with a flexible table that helps us a lot! But in any case, we appreciate the comment, it was with tips like yours that we were able to evolve at the time and we still evolve today, have a nice day! 🙌🏻😁
So sorry for being THAT guy but quality of some of these prints (well most of them) is not best. Also brim brim and more brim. NOT NEEDED for prints like that at all. I went through quite few printers and you just waste time and filament. Also some printer things looks crap just because your filament is so shiny :/
Hey! This was a compilation from 2023, it really doesn't have that much quality, nowadays we have a Neptune 4 Pro, our impressions have improved a lot with a new printer and a little more experience! We still have a lot to learn, I invite you to follow the evolution of our channel! Thank you for feedback 🙏🏼 Have a nice day 😁
@@mrkennedy3dwould you recommend the neptune 4 series? I’m thinking about getting a neptune 4 plus but I’m new to 3d printing and I don’t really know how to compare
Can you send me links please
Hey, how are you? For sure! Which link do you want?
Boring.
Well, thanks for the feedback anyway 😅 Have a blessed day 🙏🏻