You mean the washer. On a stock variator the washer can be removed. Its a restrictor. The washer supplied for this you use it for minarelli engines. Like the aerox and aprilia sr carb models
the malossi variator is built so that the weights go farther outwards than the original and the running surface for the belt is also larger so that a greater speed can be achieved
Dove posso comprare tutti gli attrezzi per smontare la trasmissione? Che marca dovrei comprare per avere un buon prodotto duraturo e affidabile? Grazie.
Tuning my new build!2004 Derbi Atlantis Bullet et2 - 70cc S6mk2 sport, S6 PWK 21 carb, S6 intake system, Yasuni R, Malossi 2000 variator, green Polini springs , original crank, belt and contra spring. 5 gram roller weights... what are the optimal weight that you would recommend? Currently rips awesome, got it in a super windy day to 64 miles an hour… And decide not to push any farther because it was risky.
Know it's a late answer but please upgrade your crank if you're gonna go 70cc. And put a malossi kevlar belt on it, change the exhaust to yasuni carrera 16 and for rollers, use 4.5 gram
You would Also need some tighter clutch springs so the clutch Will engage at a Higher rpm, or else it Will barely be able to get going from a stop because of the low rpms at launch
Anyone knows why the metal 5mm washer needed? I bought a used multivar with the rés spring but I didn't have the metal washer,can I assembly without it?
@@lockerzFITTOME thanks for the answer,but another issue,that I cant assembly my minarelli do I need to change the spacer that sors beneath the electric starter clutch to a thinner one?
@@ferencbalogh9897 What scooter do you have? Do you mean the spacer that is visible at 3:12? It says you need a 5mm spacer only for Malaguti f12 scooters. Other minarelli engines take 2mm spacer. If you don't have it you can probably buy a spacer in a hardware shop. If it's more than 2mm you can grind it down to 2mm with some simple tools.
@@lockerzFITTOME I have an f15 thats a similar engine,like F12 but I want to use the electric starter,the problem is if I assembly like the factory variator I cant put on the Kick starter becouse I dont have any space,but if I remove the starter clutch I can easyli assemble everithing
@@ferencbalogh9897 So you don't have any spacers between variator and starter clutch and you still don't have enough space for kick starter? So I guess you don't even have enough space to bolt the variator and starter clutch on the crankshaft at the same time. It seems to me that you don't have the right variator for your engine. Do you know what engine do you have? Is it minarelli horizontal? I have Yamaha Aerox with this engine and I can measure how much crankshaft sticks away from the starter clutch and how thick is my variator.
Il problema è trovare e comprare il kit tool.... Introvabile!!!! Tutti i meccanici montano con la pistola ad aria compressa e a lungo andare si rovina tutto... Malossi? Xchè non fornisci gratuitamente ai meccanici moto il kit? A loro conviene xchè gratis, a voi vi tornerebbe come torna-conto sulle vendite di tutti i vs prodotti
Merci beaucoup cette vidéo ma beaucoup aidé
Nice work 🔥🔥🔥💯
Realy good Video 🔥💨
Does it work on all aprilia sr 50 including the 2009 one
where is tarp between rollers and variator teeth ?
The tools used on this small job are worth more than my Bike
Ib sou
Lol
What is the tool set used for this one?
这工具国内没有卖啊
Una pregunta mi moto de 10 a 30 kilómetros se me aoga le tengo ke kitar el gas y abrile osea ke en bajo
Do you need to change the white spring, don’t have the tools for that.
At 3:12 do I need this 5mm adapter washer? Or is it just another restrictor?
Tem como mandar o link desse extrator de embreagem?
What are the names for the tools
Que gramos de rodillo le puedo poner para que tenga más salida a mi moto Aprilia sr 50??
3,8 ó 4,5 gramos
Why didn't you tighten the drive belt
What is the big adapter ring for? does that slow down?
You mean the washer. On a stock variator the washer can be removed. Its a restrictor. The washer supplied for this you use it for minarelli engines. Like the aerox and aprilia sr carb models
Where is the difference between original standard vario and malossi variator on a ATV 300cmc. Upgrading what ?
the malossi variator is built so that the weights go farther outwards than the original and the running surface for the belt is also larger so that a greater speed can be achieved
What size is the first spacer u put on in between the sprag clutch variator ?
2mm, but what is the purpose of the washer it provides? You can't install it without this washer. does it limit the opening of the variator???
What about the grease ?
you dont need grease
Do I need to drain the oil first ?
Toby Murs no
what oil there is no oil
@@ragehd2002 xD
You may need empty tank as it may explode
Dove posso comprare tutti gli attrezzi per smontare la trasmissione? Che marca dovrei comprare per avere un buon prodotto duraturo e affidabile? Grazie.
En amazon👌🏽
Tuning my new build!2004 Derbi Atlantis Bullet et2 - 70cc S6mk2 sport, S6 PWK 21 carb, S6 intake system, Yasuni R, Malossi 2000 variator, green Polini springs , original crank, belt and contra spring. 5 gram roller weights... what are the optimal weight that you would recommend? Currently rips awesome, got it in a super windy day to 64 miles an hour… And decide not to push any farther because it was risky.
Know it's a late answer but please upgrade your crank if you're gonna go 70cc. And put a malossi kevlar belt on it, change the exhaust to yasuni carrera 16 and for rollers, use 4.5 gram
You would Also need some tighter clutch springs so the clutch Will engage at a Higher rpm, or else it Will barely be able to get going from a stop because of the low rpms at launch
Does anyone know if it will work on a Yamaha Neos 4 stroke 2009?
It works with any moped
@@sane6096 minkä tahansa skootterinkaa*
@@niksusa ihanko totta vittu
@@sane6096 no eiku tarus
@@sane6096 tarua
❤❤❤❤❤❤
What is that tool name? 1:40
2 arm puller
👌👍🙏👈
more top end speed?
no because of the plasic ring on the hub if you remove it then your scooter will drive faster
@@ragehd2002 how much faster?
@@dageros_dima_csgo7431 its diffrent from scooter to scooter your scooter can drive up to 30kmh faster
kalo
Anyone knows why the metal 5mm washer needed?
I bought a used multivar with the rés spring but I didn't have the metal washer,can I assembly without it?
It's a restricting spacer to limit top speed to 45km/h. You don't need it, but be careful around the police...
@@lockerzFITTOME thanks for the answer,but another issue,that I cant assembly my minarelli do I need to change the spacer that sors beneath the electric starter clutch to a thinner one?
@@ferencbalogh9897
What scooter do you have?
Do you mean the spacer that is visible at 3:12?
It says you need a 5mm spacer only for Malaguti f12 scooters. Other minarelli engines take 2mm spacer.
If you don't have it you can probably buy a spacer in a hardware shop. If it's more than 2mm you can grind it down to 2mm with some simple tools.
@@lockerzFITTOME I have an f15 thats a similar engine,like F12 but I want to use the electric starter,the problem is if I assembly like the factory variator I cant put on the Kick starter becouse I dont have any space,but if I remove the starter clutch I can easyli assemble everithing
@@ferencbalogh9897 So you don't have any spacers between variator and starter clutch and you still don't have enough space for kick starter? So I guess you don't even have enough space to bolt the variator and starter clutch on the crankshaft at the same time.
It seems to me that you don't have the right variator for your engine.
Do you know what engine do you have? Is it minarelli horizontal?
I have Yamaha Aerox with this engine and I can measure how much crankshaft sticks away from the starter clutch and how thick is my variator.
dont put the plastic washer it is restriction
What about the metal washer? Can I install without it as well?
@@O_Mostr yes its exactly the same as plastic one just throws that in the trash
hi
Engrassar rodillos i cojinetes de embregue
Il problema è trovare e comprare il kit tool.... Introvabile!!!!
Tutti i meccanici montano con la pistola ad aria compressa e a lungo andare si rovina tutto...
Malossi? Xchè non fornisci gratuitamente ai meccanici moto il kit? A loro conviene xchè gratis, a voi vi tornerebbe come torna-conto sulle vendite di tutti i vs prodotti