I originally used this product on my brand new dark blue sedan and my wife's three-year-old dark blue SUV back in mid-February, in both cases applying a second coat after waiting 24 hours. I clayed, polished (TW Hybrid Solutions Polish), and prepped the SUV with an IPA prior to application, but did nothing to prep my sedan other than washing and using an IPA to clean the panels. It has now been almost seven months and both vehicles are holding up extremely well. The gloss is still extremely good on both cars and water beads and sheets like crazy when it rains and during washing. I admittedly use a drying aid when washing both vehicles, (TW Hybrid Wet Wax in the case of the sedan and P&S Bead Maker in the case of the SUV), but I am beginning to wish that the protection would fail so I can try something else. My impression of this has been that it is extremely easy to use and it performs as advertised.
Having ordered this product from Amazon only to find no english instructions I turned to CZcams and happened upon your video which helped greatly. I washed my canvasite blue Merc and my wife's silver grey Volvo V40 with Turtle's ceramic wash product. I then dried the cars and applied the ceramic coating both by direct spraying and wiping on as per your method. It's winter here in north Essex, UK and 10.5c. All I can tell you at this point is both application methods worked and a streak free result was obtained. My purpose in all of this is to get 1 winter's worth of cars staying cleaner when our roads are mucky and awful. We'll see...
I have a 2024 Mazda CX-50 in dark gray metallic (Mazda refers to it as machine gray metallic). After washing and drying, I applied the first coat of TW Hybrid solutions first by spraying directly onto vehicle and then onto a microfiber cloth. I decided not to wait 24 hours and applied the second coat about 2-3 hours later. So far so good. Leaves a really nice finish that really shines in the hot Texas sunlight. Didn't notice any streaking despite the dark color.
Greetings from the USA. My Taurus is dark grey. I did run into some streaks on the hood, (used a little too much), however took a damp microfiber cloth (used distilled water) and gently leveled. It got rid of those streaks. Excellent product and I'm very satisfied. Great video - keep up the great work!!
I have a black car and have found that if I start by spraying my microfiber towel twice with the ceramic spray, i can then I spray the panels and gently wipe the panel with the same cloth, I don't get the streaks. I then wipe it off with a dry cloth. If I fail to spray the cloth itself beforehand it always streaks in my black car.
Glad to see you gave it another go, I do have a garage so application is easier. It definitely is not a 12 month wax, 2 coats will give you 6 months at best. Great on the windshield as it beads the water in a rain storm.
I’v been cleaning my car other day, and I’v applied that coating all over my car including windows and black/chrome trims, and it’s astonishing! Of course starts raining an hour later, so excited how it beats water. You don’t even need to use wipers. 👌👌
RainX does better for glass honestly. This stuff is incredible for the finish considering how little is needed and how much you get for the price though.
Be careful with FogX btw. If you smoke or vape or the glass isn't spotless and dry before you'll get a rainbow effect. Of course RainX or this applied inside will do worse because of humidity though....lol.. never use RainX or a product like this inside the vehicle.
@@CynHicks I’m never using anything on glass inside car, just cleaning with magic sponge water, then wipe dry cloth. No smudges, and I hate smudges really bad. Had fogx kind a thing ages ago on mine first car when over a winter fan wasn’t working, but film was left on glass and I can’t stand it🤷♂️
@@epicautomotivedetailing it does cause it silver, and paintwork isn’t perfect either, water beating was what I looked for, and did work for few months 😉
I got incredible results with this product. I applied two coats 24 hours apart on two vehicles and I did get nearly one year of water repellency. I also use waaaay more than two sprays per panel.
@@AzanAli- Same. The smears on my black car are unworkable using this product.. will try the damp cloth method tomorrow morning but Im staring at it on my driveway and its terrible.
Keep both videos... they are both honest experiences... & I really liked the honesty. I too had the streaking experience but found that either a quick wipe with a damp cloth or Rinse & towel dry cleared it. Having used the TW hybrid for over a year now. I also do this.. wash the car with PH Neutral products, then using a cheap garden pressure spray bottle Two or three caps of TW Ceramic wash & wax shampoo & Fill with water, & spray over the car liberally, and leave a couple of minutes...then rinse off & towel dry... the protection really builds up, It's really easy & the beading on my car (Gunmetal type metallic gray) is excellent! (I wash the car about every two weeks.)
I put this on a 2013 ford fusion, black with flakes and I had zero issues. I applied two coats, and waited a week to wash my care with CG's "hydrowash ceramic soap" (not sure if thats the name) and the water beading was incredible. The car looks amazing (Like a mirror in the sun) and was easy to clean and dry. I also put it on my glass, tires, and mirrors. I didn't even need to use my wipers the rain just blew off.
@@epicautomotivedetailingyou have to learn the knack to using this product. This product is so easy for me. I just apply it to a 2x2 section at a time and wipe it with dry cloths until I see it disappear.
LOVE your candor! Though I am 3 years late seeing this video, I am a female watcher and subscriber to your auto detailing channel, who's recently purchased a new car that she details weekly. Glad you revisited applying the Turtle Wax Hybrid Solutions Ceramic Wax Spray. I LOVE that product and have used it on my car which is a dark color. What really makes it pop is the Graphene Flex Spray, also from the Hybrid Solutions line. Not sure if you've tried that one, but it's excellent on any color of a car, but especially darker-colored cars.
you got me into car detailing/valeting, started up my own business whilst doing a levels and just done my first two step/stage enhancement the other day. Still love watching your content very funny and informative :)
I've used this on 2 new cars now--Acura MDX and Ford Expedition, both metallic silver. Great results on both--slippery smooth and water beads like crazy, but not sure how long they last yet (it's only been a few months on the Acura, and just today on the Expedition). I put two coats on, waiting 24 hours between each, then letting the last coat "cure" an additional 24 hours before exposing to elements--everything done in a garage. One thing I noticed is that the quality of the paint definitely affects results on application. The Acura has thick smooth paint with little orange peel, plus I clayed it before application. Putting the product on I had very few smears, and those that did happen came right out with a little extra rubbing. The depth of shine on that thing was incredible. The Expedition paint quality is not as good as the Acura, plus I did not clay it before putting the product on. Therefore the paint is not as slippery smooth as the Acura because of small imperfections--feels rougher. The depth of shine is not as good either, and smears were more of a problem (but still not really difficult to deal with). But still impressed, assuming it will last. I also bought the Turtle Wax companion product (Hybrid Solutions Ceramic Wet Wax), which you are supposed to spray on after washing while the car is still wet--spray on then dry with towel as you normally would. This is supposed to make the coating last indefinitely if you use it after each wash, but we'll see.
I bought this as it was a stupid price on Amazon with the attraction of 12 months protection. I did both coats 24hrs apart on a 2017 Volvo V40 and a 2019 Toyota Yaris. I did the spray on the cloth technique which definitely helps with the over spray, I found it applied well but the buffing was hard work and quite a workout. Now it's been done (2nd coat now curing) it gives an amazing finish and quite honestly better than the Autoglym ceramic spray which has a shorter life and a higher price. I've put 2 coats on the diamond cut wheels so hoping it helps to keep the brake dust down. We will see how long it lasts but so far so good and pleased with the high gloss finish I've been left with.
Literally adjust finished doing my car, Ara blue rs 3 saloon. It was a nightmare to get off once applied on a 11c day. After trying a few different things I found to put slightly more on than they say, spread well and leave to dry. Buff with fluffy clean micro and all is goof. Impressed with shine even on a cloudy day. Will second coat tomorrow 👍
I fully agree. Similar to Maguire's hybrid spray. Amazing product, just a bi/%h to apply. I've just gotten in from putting the 1st coat on my wifes black Forester. After a couple of pannels I remembered you saying "less is more" wow did that make it easier. Thank you for the help 👍
Dave, your glass cleaning method....wort y of legend! About the spray, I found working on black paint, I had to have a damp cloth to hand once I applied and buffed to go over it again to take out the smears that were left. once done the results were fine. I didn't like this product at first as I felt far too much effort was needed to apply 2 coats and as you say via the instructions allow 24 hours for it to cure before further application. On my silver Passat I went on well, however after the first couple of washed the hydrophobics went south really quickly (bearing in mind I had not applied any of Turtle wax hybrid solutions wet wax or the detailer) once applying the wet wax on the next wash, hydrophobics came back with no issue. Think another go will be in order, thanks for another great vid and tips.
Thanks Phil. One thing that is clear is the fact this probably the most unpredictable product I have ever used in my life. Next ceramic spray I got is from yum cars so that should be interesting because they are seriously good
Glad you revisited this. I fully committed with their system, decon, polish etc. Waited 24hrs and still the spray was difficult to apply. I ended up doing similar to you, multiple clothes. The car looked great...in the end! If I was doing it for a living I wouldn't reach for it either Protection seems good. Deffo not putting it on my Windows😁 Cheers, Simon
@@epicautomotivedetailing I squeezed it in to the garage and did it over a few days during lock-down in between working at home as car wasn't in use. Wouldn't want to do it again LOL.
Love this stuff. Spray your towel and the panel. Give it a heavy crosshatch coat. Use the slightly damp towel to smooth it out. Reapply in 24 hrs and you are good to go for months.
Dave, give the Yellow wet wax one a go. That is good. No smears! Good on you for trying this product again...I am still stuck with a bottle of it. Ceramic coated the rubbish bin the last day :)
Just got in, from doing the Ceramic Turtle-wax on my Jag XKR, medium Pearl grey, I washed & clayed, then (with trepidation) began applying the “stuff” as directed but like you, quickly changed over to squirting directly to the micro-fibre. I did the windows, chrome and paint-panels all at the same time. The stuff is brilliant!! Looking forward to doing again in 24hrs. 👍🏻🇨🇦😎
Just got pointed to you from Paul Dolden - like the content and your style, well done fella. Subbed. The TW range has worked for me on 2 cars, wife’s selenite grey merc and a pearl red DS3. Merc was in very good nick, it lives with me so gets good, regular, careful maint washes and had a 2 stage DA Megs 105/205 minor correction the previous year and sat outside by the sea under NXT wax. Been a Megs guy for years but fancied a go at some weekend warrior ceramics you can use in the open, and TW reviewed well for that purpose at the start of this year, so went that route four the merc’s spring spritzer. This time, (hot April sunny weekend) it got a foam, wash, clay, TW ceramic one stage DA polish and then TW ceramic spray coated the next day - an unseasonable hot day. Result was fine but you had to be quick in the sun while spreading fairly lightly in a cross pattern and I used the damp towel before final buff too. If you try to rub too hard or buff the initial spray application, that is where the problems start imo. Just get it sprayed on, immediately spread it relatively lightly, give it 30 secs and use a damp towel to level it before the buff. Daughter’s DS3 was a bit of a shit box, not much maint washing done in 3 years of her ownership. Seemed softer paint than the merc, so roughly the same process, foam, wash, Tardis lower half, clay, single stage TW ceramic with localised 2 stage in problem areas, and all was good again in the hot sun on quite darkish pearl red. This time it was windy so I sprayed it it to the towel instead of to the car and it also worked fine. One thing I do like in their range is the ceramic wet wax. Super easy to use and maintains the hydrophobic properties, meaning that I probably don’t have to use the ceramic spray coating as often as I would. Just done my silver Freelander 2 this weekend which was in a right state from the previous owner. Used old school decon routine with lots of Tardis down low, a clay and started on a TW ceramic machine polish on the bonnet. It didn’t touch most of the defects, so will be going back to Megs 105/205 combo (or heavier if I have to) to get that right on very hard (seemingly even harder than the merc) paint when I have more time. Then it’ll probably get a TW ceramic spray over that, but for the moment it will have to sit under some old Megs NXT wax protection with its defects intact but looking okayish from 10 feet away. I see the TW range as a keen amateur’s product that gives good results IF you follow the instructions to the letter and recognise their limitations - especially the one stage polish, it is very mildly abrasive. Using the maint wash ceramic stuff seems to keep its hydrophobic properties going well. But that stuff isn’t cheap (unless you just buy 2 bottles for 22.50 with the 10 quid off 30 quid spent discount code they just reminded me I had)! TLDR, horses for courses but it meets what I expect of it.
I must thank Paul for the mention. I've got the hang of it a bit more now. I was bang out of order saying what I did but i was expressing the anger that many people had with it. It's working great at the moment now the Temperature has dropped. Thanks for watching mate 👍
TW still suggests you apply in shade, but overcast or early morn, or near sundown works well too. I have found that in higher temperatures, besides shade, it helps to apply by spraying a slightly moist microfiber towel with the product, then levelling any stubborn buildup with the the clean side of the moist towel.
Dave this stuff is rubbish simply because you really need to get the car indoors if you live in the UK. The weather here is messed up all the time ie. too bloody hot or drizzling rain and to get 2 days the same even for the likes of me (weekend warrior) its too involved with just too many things to make it take longer. The 1st vid was spot on lol all the ladies have told me so lol. Keep it up and stay safe.
Cheers Jonny. Yes it is rubbish, but then it is very good too... Confused, you should be lol. It all depends on so many factors. So I was fortunate on this day but I wanted to prove a point that the product can be so hit and miss
I like your honesty. I tried this on my grey astra the week before your vid and i wasnt impressed. I've GT'd mine and its looks great. I prefer turtles wet n wax. Used that on my folks car and its great. And show some love for your nan's Volvo! Looks ace. Nice wheels 😁
I had a major problem with smearing with this product on my black fiesta. I would have to do tons of buffing afterwards with a damp cloth and then a dry cloth. I think ill try your methods of spraying it onto the cloth and also making sure its a cool day.
Tested this on a black Tesla yesterday, and almost had a heartattack when I tried wiping it off. Streaks everywhere. Then I learned, use a damp microfiber in one hand to wipe out the 2-3 sprays with. Then use a dry microfiber in other hand to wipe off with. Worked perfect.
I had a Similar Experience the First time I used it,,I think my Second Application was Much better But I Don't know why . I put it on my 2020 Barracuda Silver Low rider S Harley Davidson.. She looks Super..
I wouldn't worry about it blowing into the glass. I use this stuff instead of rain-x now. It's way more effective in my tests. I guess, equally effective but much longer lasting. just needs a dry cloth to wipe smears off at the end. I also just apply it in my garage, rather than taking a chance on weather. I've had awesome results with this on my dark grey Golf. It doesn't say anything on the bottle I have but I'm sure my last bottle said not to use it in direct sunlight. Might have been the issue with the last car.
The Meguiars Hybrid Ceramic wax can be used on glass as well as bodywork so over spray is never a problem. More to the point it is excellent on both glass and bodywork too
Used this product when it first came out and hated it, so streaky and a ballache to buff off. However tried it again recently and it was absolutely brilliant and so easy to use. Strange
Got a new video in this coming out at the weekend my friend. Going through the process on black paint. It's definitely unpredictable that's for sure. Some days it's easy some not so easy. Never known a product like it
I’ve just tried the Turtle Wax Ceramic range for the last couple of months and It’s pretty good but not blown me away. The all in one polish was excellent stuff. I found any streaks are easily sorted with a slightly damp microfibre which is common on a lot of these SiO2 sprays. I’ve recently tried a sample of Car-Chem Lockdown which is a similar spray sealant. I think it was slightly easier to use but a damp MF was still required at times for the odd streak. I have a few Garage Therapy bits on their way including Three so I’ll see how that compares. I’m planning on using that in a month or two to see me through the winter.
Nice one Chris yeh think more winter tests are due I got 2 more ceramic sprays that I may film later as it's freezing today. Let us know how you get on with Garage Therapy 👌
Holiday tickets in the post from turtle Wax ☺️. Another good review. Easy to get frustrated like you did in the first video. I use turtle wax rinse and shine. I think it's easier to use than the ceramic one.
They won't ever invite me lol. But I'm providing so many points. Even though the last videos were negative I still think they need to rethink the marketing strategy and be more relatable with their audience. Thanks for watching mate
Ok, I used a quick trick someone sent me after my earlier comment.👍 Here it is- Apply the Polish as advised, then wipe over with a damp cloth (almost dry) - then proceed to buff up! Doesn’t take as much effort and It is absolutely amazing! Can’t say any more than that! Good luck.😁👍
@@wilacam11 I originally buffed up straight after rubbing with damp cloth. Only 30 minutes ago I used it again for a second time and it’s worked a dream without a damp cloth. Absolute pleasure to use. Spray on , quick polish off. Yep, 1st coat a nightmare but 2nd + brilliant! Hope this helps?
“Keeping a T shirt on for the woman” hahahah, nice one. I’m just about to head down to the garage and apply the first coat of the ceramic spray after a full wash, clay and Hybrid solutions polish and wax 24hrs ago. Ill wait another 24hrs to apply the the 2nd coat and I’m uploading the whole procedure for the “weekend warrior” out there.
@@epicautomotivedetailing Did my brand new Polo yesterday, (Reef Blue /Black roof), spraying it on the cloth,, no streaks or smears, !!!,, also did the diamond cut wheels too, !! Looks fantastic,, thinking of getting the Auto Finesse Lavish, as a maintenance treatment, what do you think, ??
Another great video Dave. You made very valid points about the weather and the car's colour. I think I would still have reservations about using that Turtle Wax ceramic spray coating on a dark car and I definitely wouldn't use it on a hot day. I just don't buy into this ceramic spray hype. I would far sooner use a product that's easier to use more regularly. That Volvo did look great afterwards though I have to say.
Thanks Karl j needed to put this one up. Because so many people have good or bad experiences and it seems so 50/50. I don't love the product but based on that car with that paint it did well. It still needs some tweaking and no I wouldn't use it again on a hot day with a dark coloured car but it has made me rethink a few things. Thanks for watching mate 😊
Bang video dude I've tried some turtle wax hybrid solutions and it doesn't spread easy it's robust but a bit of a ball ache buffing off and yes much better to spray it on the cloth thanks again 👌👍👏👏👏👏😊
After testing on several cars, I apply with an applicator pad, buff, wet towel, buff. A lot of work and STILL may find some streaking which i take out with a traditional carnuba wax. I am definitely not over applying the ceramic product. I did have some good results with the Ceramic Wet Wax but the Ceramic spray coating is much too much work for me. I'm coming to the conclusion that I need a product that hazes for streak and coverage control.
I have similar problem. I've just recently used this for the first time, I washed/dried, decontaminated vehicle (tar/iron/clay). I applied two coats, (24 hours apart), following the instructions to the letter. Everything seemed ok, no streaks/runs/excess etc. Dry streaks started appearing approx 4 hours after application of both coats, which were extremely difficult to buff off.
I just applied this today, only had the car from new for 2 years so didn’t bother clay barring or polishing (although there were a few tar spots) So I washed the car Meguiars wash n wax and then tried it. I used a meguiars applicator pad to apply, another cloth to buff off and then another one to really make sure it was silky smooth. So far it looks great. I have previously used meguiars hybrid ceramic spray wax and while the beading on that was amazing and Better than this turtle wax tbh. It literally came off after one wash with meguiars wash n wax ( a ph neutral shampoo) I applied it perfectly and it was great until it just came off. I reapplied it by spraying on wet car and rinsing off but it was never the same. So I’m hoping this turtle wax has better chemical resistance and will last longer, although I’ve only done one coat so far
I did a recent video on a karcher and I returned to Tesla model X few months later after applying this. I have to say it's unreal ⭐⭐⭐⭐⭐ I was way too quick to judge First time using it
i tried using a damp rung out quality rag company towel to applicate this stuff . then let it haze and wipe off with a dry towel. seemed to work well and even. It was 5 am and humid. The towel seemed to "grab a little but eventually got smoove . I have a new black truck so paint was good . I hand washed and clay toweled first.
At least you gave it another go Dave and to admit you made mistakes in the previous vid is pretty good of you. I’m still not sold though as you seem to need to many things going in your favour for it to work quite well that said you never know I might try it one day. Oh yeah and I’ve got a dark car 😂
Thanks Steve. I just want to help as many people as possible better to be honest that I was bang out order. But yeh the product doesn't do was well in the heat. I tried it again today and it was fine so it's definitely a temperature thing
Can you apply it in cold , in like +5 Celcius ? If you apply it on top of Glaze , Poor's boys black hall for example . How long both of them last on daily driver kept outside ?
Yeh there is definitely better alternatives but hopefully this kind of clears my name a bit because I was too harsh in the other videos and the biggest factor that can make or break this product is the temperature. But then again this was an old Volvo 😂.
@@epicautomotivedetailing I don´t feel as if you have to apologize for yourself. If a product is more of a hassle compared to competitive products, i think its fair to say so, being an experienced valeter and detailer.
Great video! I bought some of this today to use on my new Tiguan and wish I hadn't bothered!! I followed the instructions, washed the car from top to bottom, dried it and then felt i had to wash it all over again! It did nothing but smear the paintwork which I couldn't seem to remove easily or polish out! I ended up using a different product entirely just to tidy up the mess this rubbish left behind! Never again!
Awesome vid Dave , just done my dark blue metallic car with this 2 coats 24hr period and first thing in the morning in the shade , then back in the garage. It does smear and a wipe with a damp cloth gets it sorted . If used like your GT 3 video it works . It's shit on hot panels and in sunlight ,smears like fuck ! By the way tried your window cleaning method on interior glass and it's spot on , no smears and great cleaning . Keep keeping it real Dave :)
Epic vid. Got a bit scared for a moment at 3:53 thought the crappy background music from meguiars videos was following me about. Once I got over that thought great vid as usual thanks Dave (first vid you appear uncomfortable with products I've seen) as supporters of your work I take your opinion seriously. I prefer turtle Wax sealant/ice. Leave the old vid up. Balanced view different days different car. Real life experience. I don't think any less of you. Thank you for the videos.
Dave. Need an index/ quick ref attached to each vid. There is two I need to find in back of my mind. I saw briefly or heard you mention. That I will try and find now.... 1: applying products to black cars. 2: your window method.
For a 1yr old car with a weekly automated carwash - can't DIY- no water supply in my garage, do i need to apply rubbing compound first before applying the ceramic spray?
Thanks for the vid mate i used it on my black car it was naf to start with then the damp cloth trick and all was fine no problems i will continue to use it until its empty then may try something else not one for shelves of half empy tubs but thats me and the flunky is still working
Well done I probably should of just carried on with the old video till ingot it right but glad I tested it again. It wasn't too bad but then this paint was very different
@@epicautomotivedetailing I still like using wax though and my old winter combo of collinite 476 topped every 4 washes with aqua wax got me through 6 months no problem
@@simonturnbull5011 go for it. Whatever works for you so many people are so quick to judge if you use a product that they don't like. I'm the same use what makes u happy 👍
Just used for 1st time...hard work on glass! Car is brand new and white so hard to see any smears. But i think there are some. Not that easy to use in my opinion. Now for the 1st rain shower to see how it performs.... the main reason i applied it
Well you've inspired me to give my Turtle Wax Ceramic coat a second chance. Did it yesterday in hot temperature, on my black car and it wasn't very satisfying at all. *EDIT* literally just gave it a second application and it kinda sucks on my black car. Had to wipe off the rain first (because it's the UK and a whole 24 hours of dry weather doesn't exist). It still went on streaky. Doesn't add any shine, or enhance the look of the paintwork in any way. Just makes train water bread up on it. If it keeps making rain water bread up on it for a year then that will be a good thing. But trying to use a product the needs 24 hours of good weather just isn't going to work on rainy Brexit Island, lol.
I'm the same, mines a blue car and was a nightmare on security glass. I think it's best to just use the wash and wax product and wash frequently to let the product build up. This ceramic spray needs quite abit of work it seems.
I admire the fact you took the time out to give the product another go by making another video with a different car. So couple of comments..firstly (and correct me if I'm wrong) but isnt the product you used a protective 'coating' more than it is a polish? And since TW also do a ceramic polish (which is also a cleaner), to my mind it makes sense you perhaps should use that first THEN apply the coating product? I think the way you have done it is you have tried to use a 'quik detailer' coating product as a type of 'all-in-one' which its not and I doubt theres any product out there which is. If I'm right it might explain why you got better results on this car than the one in the previous video, since one explanation is the paint on this car was already in better condition when you started than it was on the Range Rover?
Hello David, yeh your right it's a protective coat not a polish but the idea I wanted to point out that most people using it wouldn't of bothered clay barring or polishing first. People only read the bits they want to see. So the way it was marketed was like this (spray on wipe off for a perfect finish) but to get that finish u need to do all the steps before hand to paint. So that's why I was annoyed too because I wanted to get in that mindset of an average Joe. For me the reason this sucked was because of the weather. I truly believe that was the difference between the applications. Range was done on scorching hot day. Volvo was done on cool day so I think that's the reason it didn't quite go to plan. That and the fact I wasn't having a good day anyways lol
@@epicautomotivedetailing Yea I totally get it. TW I think have produced a great product with this ceramic range by all accounts but have done themselves a disservice in the way the coating product is marketed. In fairness though, its not dissimilar to what their competitors do. To my mind though watching your first video I didnt really expect an amazing result from a spray on wipe off product lol. Products such as this are for detailing after all the hard work is done. There's still no substitute for hard buffing with a good polish/cleaner (and a clay bar first if required). I've just ordered their polish and coating (even though my cars only 5 years old and the paint is in great condition) and I expect a great result used in that order. I suspect you using that coating protectant on an average paint and in the sun just resulted in the product working its way into the degraded paint instead of sitting on the surface. From there it sounds like it became impossible to get out with the resultant average finish.
@@DavidTron63 was a really silly video on my part. I'm waiting for colder weather to try it on a black paintwork as most tests I've seen are all in hot conditions. Thanks for watching my friend
Thought you were making a big fuss over applying it BUT NO tried it yesterday could not spread it what ever I did had to use a damp cloth on it took me along time going over it and not knowing what was left on paint after wards. The other thing was I found some spots of air deposit had embedded into it before it cured which is 24 hr not good for outside work and don't know if I can get them out when its cured. In the bin with this product for me. Shows your review was Honest This may work under ideal conditions but not in general use
Thanks Barry, I was very harsh but yes to get this to work u need 100% perfect conditions I feel. Cool cloudy day no heat and a lighter colour. Yum ceramic and garage therapy are better in my opinion
The probem with this spray is it has to be sprayed on the car directly. I wish the flash point would be a little slow so I can use it on an applicator pad to go through those nooks and crannys without over spray.
Hi, Thanks for these Epic, genuine and humorous videos. I bought a car 2 months ago (Turquoise colour). I live in the Philippines where there is no cool day and I need to wash the car at sunset to avoid direct sunlight (+35C). I use deep-well water (lots of mineral deposits) with a pressure wash, shampoo and rinse. I don't know how to decontaminate etc. to prep the paint, ideally, I would prefer to skip this. I'm looking for 2-3 products (max) to clean, protect and shine my car. I don't mind spending 30-60 minutes to apply a product if it's less than every 2-3 months and would have quicker washes every 2 weeks or so. If a product can limit the water spots from the brackish water, it would actually save me a lot of time. What product would you recommend? (Turtle Wax lines are available and decently priced). In my situation, would you choose the TW Ceramic & Graphene paste Wax, the ceramic coating spray or the graphene? (or something else?) PS: If it makes a clear difference, I may consider an extra product to clean the interior and the tyres.
Dave, I bought 2 bottles of this and I can’t work it out? It seems to stain on the panel. I’ve been valeting for years. It’s the only solution I’ve had trouble with
I have similar problem. I've just recently used this for the first time, I washed/dried, decontaminated vehicle (tar/iron/clay). I applied two coats, (24 hours apart), following the instructions to the letter. Everything seemed ok, no streaks/runs/excess etc. Dry streaks started appearing approx 4 hours after application of both coats, which were extremely difficult to buff off. Has anyone else had this problem?
You definitely had an easier time on the lighter silver paint, but that's not something unique to this product. Heat also definitely a factor. I struggled with an application on my car which was inside a garage in the shade, but very high ambient temperatures and I was not prepared for just how quickly the product was going to cure. In hindsight I needed a different day, or certainly less product and working in smaller areas at a time, even dividing single panels up in those conditions. Lastly I think the GT three application technique is a great tip for any of the spray sealant products, especially starting with application via a pad or cloth as you also found. You can see why TW mindful of the mainstream consumer would have not thought need for 3, possibly 4 cloths to apply a great selling point. It seems the longer the longevity claims, the trickier the product to work with and more care required. Seems reasonable really. For the stress free and easiest experience, just use a hybrid qd and apply every 3rd wash, or as often as you like. Take your pick!
Thanks Graham. I appreciate the feedback. I had to bring this video out while I'm covering more ceramic based videos. I think people just need to be aware that the weather can be such a huge factor. I will try this again on a black car in the winter to see how it works in the cold. I love GT three. The gloss is insane. Looking forward to seeing their new ceramic coating soon when that comes out
Hello. Do you recommend this product to a newbie :) which doesnt have a garage. I will apply this thing outdoors like you. Will it last 12 months with 2 coats? Do i really have to wiat to apply second coat?
Had to do it on got to see through a fair test. It did ok to be honest. But then it was a lighter car so I'm still not 100% but it's interesting to say the least 👍
I sprayed my bumper an now it’s gone dull tried to polish it with meguiars but it won’t bring the shine back any recommendations how to get the shine back without having to spray it with clear coat again
Every review says it is easy to apply, and today I bought and try. As you said it is not easy to apply. Once it starts dry it is impossible to buff perfectly. The solution I find is, apply with applicator, buff with a microfiber and second buff with another microfiber immediately very fast. Othervise oily paint and I could not fix with buffing. Even Fusso coat is easier to apply than this product.
I have tried several of these spray-on "ceramics" and they ALL leave nasty annoying rainbow streaks all over, no matter what temp. I wish you'd done this on a dark car like you did the first time, but on this cooler day. I hate buying $15 magic spray-on and getting disappointed, again, and also spending half an hour trying to clean up all the streaks.
No worries I'm doing one promise. I'm waiting for temperature to drop a tad more to see how it works in the cold. If you want quick and easy try cartec fast glaze it's pretty incredible
@@epicautomotivedetailing Awesome, thank you! I have a dark blue car and man the streaks, spots, and "oil sheens" are tough on it as you're aware. I think I'm going to give this a try soon, my last wax was in March so it's about due. Hopefully it applies on top of a wax okay. I'll start somewhere other then the hood. :)
It's hit and miss mate. So I had a look at the Volvo this morning and tried a water test with one coat and loved it so the biggest flaw is the application process. Unless you get it right in good temperature it does cause problems. I've never known a product to be so random but this time it was easy to apply 👌
I originally used this product on my brand new dark blue sedan and my wife's three-year-old dark blue SUV back in mid-February, in both cases applying a second coat after waiting 24 hours. I clayed, polished (TW Hybrid Solutions Polish), and prepped the SUV with an IPA prior to application, but did nothing to prep my sedan other than washing and using an IPA to clean the panels. It has now been almost seven months and both vehicles are holding up extremely well. The gloss is still extremely good on both cars and water beads and sheets like crazy when it rains and during washing. I admittedly use a drying aid when washing both vehicles, (TW Hybrid Wet Wax in the case of the sedan and P&S Bead Maker in the case of the SUV), but I am beginning to wish that the protection would fail so I can try something else. My impression of this has been that it is extremely easy to use and it performs as advertised.
well done Douglas Im pleased to hear you had great results from it.
Haha I'm the same. I want the protection to deteriorate so I can try other stuff!
I had a similar experience. Applied it to two vehicles (24 hours apart) and I had almost a year of very effective water beading.
Hi, after applying this can we apply polishing agent after a week?
Can I use it on my bike ??
I really appreciate your humility. It's hard to find these days. Glad you tried it again and gave your honest feedback.
Thank you. My newer content is better ⭐
Having ordered this product from Amazon only to find no english instructions I turned to CZcams and happened upon your video which helped greatly. I washed my canvasite blue Merc and my wife's silver grey Volvo V40 with Turtle's ceramic wash product. I then dried the cars and applied the ceramic coating both by direct spraying and wiping on as per your method. It's winter here in north Essex, UK and 10.5c. All I can tell you at this point is both application methods worked and a streak free result was obtained. My purpose in all of this is to get 1 winter's worth of cars staying cleaner when our roads are mucky and awful. We'll see...
I have a 2024 Mazda CX-50 in dark gray metallic (Mazda refers to it as machine gray metallic). After washing and drying, I applied the first coat of TW Hybrid solutions first by spraying directly onto vehicle and then onto a microfiber cloth. I decided not to wait 24 hours and applied the second coat about 2-3 hours later. So far so good. Leaves a really nice finish that really shines in the hot Texas sunlight. Didn't notice any streaking despite the dark color.
Greetings from the USA. My Taurus is dark grey. I did run into some streaks on the hood, (used a little too much), however took a damp microfiber cloth (used distilled water) and gently leveled. It got rid of those streaks. Excellent product and I'm very satisfied. Great video - keep up the great work!!
Hello USA, greetings from cold, wet UK 🇬🇧, my next video is all about this on black cars
I have a black car and have found that if I start by spraying my microfiber towel twice with the ceramic spray, i can then I spray the panels and gently wipe the panel with the same cloth, I don't get the streaks. I then wipe it off with a dry cloth.
If I fail to spray the cloth itself beforehand it always streaks in my black car.
It’s just take your time, do a small section at a time and keep wiping until you see it disappear.
Hi, thanks for the video. Very informative. Noob here. Is it safe for a new car and wheels rims? Thanks
A 69-yr-old grandmother watching. So yes, women watch! Thanks for your helpful vids, Dave.
Thanks so much 🙂
Glad to see you gave it another go, I do have a garage so application is easier. It definitely is not a 12 month wax, 2 coats will give you 6 months at best. Great on the windshield as it beads the water in a rain storm.
Thanks for sharing Rob this will help others who think it will last 12 months
I’v been cleaning my car other day, and I’v applied that coating all over my car including windows and black/chrome trims, and it’s astonishing! Of course starts raining an hour later, so excited how it beats water. You don’t even need to use wipers. 👌👌
Nice one hope it looks good in direct sunlight for you ☀️
RainX does better for glass honestly. This stuff is incredible for the finish considering how little is needed and how much you get for the price though.
Be careful with FogX btw. If you smoke or vape or the glass isn't spotless and dry before you'll get a rainbow effect. Of course RainX or this applied inside will do worse because of humidity though....lol.. never use RainX or a product like this inside the vehicle.
@@CynHicks I’m never using anything on glass inside car, just cleaning with magic sponge water, then wipe dry cloth. No smudges, and I hate smudges really bad. Had fogx kind a thing ages ago on mine first car when over a winter fan wasn’t working, but film was left on glass and I can’t stand it🤷♂️
@@epicautomotivedetailing it does cause it silver, and paintwork isn’t perfect either, water beating was what I looked for, and did work for few months 😉
I got incredible results with this product. I applied two coats 24 hours apart on two vehicles and I did get nearly one year of water repellency. I also use waaaay more than two sprays per panel.
Unfortunately, the extreme smears made me give up on this product. I will give it another try soon.
@@AzanAli- Same. The smears on my black car are unworkable using this product.. will try the damp cloth method tomorrow morning but Im staring at it on my driveway and its terrible.
Keep both videos... they are both honest experiences... & I really liked the honesty.
I too had the streaking experience but found that either a quick wipe with a damp cloth or Rinse & towel dry cleared it.
Having used the TW hybrid for over a year now. I also do this.. wash the car with PH Neutral products, then using a cheap garden pressure spray bottle Two or three caps of TW Ceramic wash & wax shampoo & Fill with water, & spray over the car liberally, and leave a couple of minutes...then rinse off & towel dry... the protection really builds up, It's really easy & the beading on my car (Gunmetal type metallic gray) is excellent! (I wash the car about every two weeks.)
I put this on a 2013 ford fusion, black with flakes and I had zero issues. I applied two coats, and waited a week to wash my care with CG's "hydrowash ceramic soap" (not sure if thats the name) and the water beading was incredible. The car looks amazing (Like a mirror in the sun) and was easy to clean and dry. I also put it on my glass, tires, and mirrors. I didn't even need to use my wipers the rain just blew off.
Yeah this is amazing but they definitely didnt make it easy for themselves thats for sure
@@epicautomotivedetailingyou have to learn the knack to using this product. This product is so easy for me. I just apply it to a 2x2 section at a time and wipe it with dry cloths until I see it disappear.
LOVE your candor! Though I am 3 years late seeing this video, I am a female watcher and subscriber to your auto detailing channel, who's recently purchased a new car that she details weekly. Glad you revisited applying the Turtle Wax Hybrid Solutions Ceramic Wax Spray. I LOVE that product and have used it on my car which is a dark color. What really makes it pop is the Graphene Flex Spray, also from the Hybrid Solutions line. Not sure if you've tried that one, but it's excellent on any color of a car, but especially darker-colored cars.
you got me into car detailing/valeting, started up my own business whilst doing a levels and just done my first two step/stage enhancement the other day. Still love watching your content very funny and informative :)
Thank you Oscar really appreciate that well done on your new business venture 👏
I've used this on 2 new cars now--Acura MDX and Ford Expedition, both metallic silver. Great results on both--slippery smooth and water beads like crazy, but not sure how long they last yet (it's only been a few months on the Acura, and just today on the Expedition). I put two coats on, waiting 24 hours between each, then letting the last coat "cure" an additional 24 hours before exposing to elements--everything done in a garage. One thing I noticed is that the quality of the paint definitely affects results on application. The Acura has thick smooth paint with little orange peel, plus I clayed it before application. Putting the product on I had very few smears, and those that did happen came right out with a little extra rubbing. The depth of shine on that thing was incredible. The Expedition paint quality is not as good as the Acura, plus I did not clay it before putting the product on. Therefore the paint is not as slippery smooth as the Acura because of small imperfections--feels rougher. The depth of shine is not as good either, and smears were more of a problem (but still not really difficult to deal with). But still impressed, assuming it will last. I also bought the Turtle Wax companion product (Hybrid Solutions Ceramic Wet Wax), which you are supposed to spray on after washing while the car is still wet--spray on then dry with towel as you normally would. This is supposed to make the coating last indefinitely if you use it after each wash, but we'll see.
I've got the graphene but not tested it yet. Ive done durability tests on this and think it makes a great upsell for your business
Hey it’s been ten months, how is it holding up?
I bought this as it was a stupid price on Amazon with the attraction of 12 months protection. I did both coats 24hrs apart on a 2017 Volvo V40 and a 2019 Toyota Yaris. I did the spray on the cloth technique which definitely helps with the over spray, I found it applied well but the buffing was hard work and quite a workout. Now it's been done (2nd coat now curing) it gives an amazing finish and quite honestly better than the Autoglym ceramic spray which has a shorter life and a higher price. I've put 2 coats on the diamond cut wheels so hoping it helps to keep the brake dust down. We will see how long it lasts but so far so good and pleased with the high gloss finish I've been left with.
Literally adjust finished doing my car, Ara blue rs 3 saloon. It was a nightmare to get off once applied on a 11c day. After trying a few different things I found to put slightly more on than they say, spread well and leave to dry. Buff with fluffy clean micro and all is goof. Impressed with shine even on a cloudy day. Will second coat tomorrow 👍
Darker paint is very tricky if Its not been decon washed but once you get hang of it you're left with great finish
I love the honesty, "I f&%ked up, I was a bellend" lol awesome video dude.
I did balls it up. To be fair it's brilliant it's just the application method which sucks
I fully agree. Similar to Maguire's hybrid spray. Amazing product, just a bi/%h to apply. I've just gotten in from putting the 1st coat on my wifes black Forester. After a couple of pannels I remembered you saying "less is more" wow did that make it easier. Thank you for the help 👍
@@barrygwilliam5367 nice one mate well done. I like the new flex wax but still think this ceramic is just as good.
Thanks for the info it defo better on the cloth to car 👍🏻😎
Dave, your glass cleaning method....wort y of legend! About the spray, I found working on black paint, I had to have a damp cloth to hand once I applied and buffed to go over it again to take out the smears that were left. once done the results were fine. I didn't like this product at first as I felt far too much effort was needed to apply 2 coats and as you say via the instructions allow 24 hours for it to cure before further application. On my silver Passat I went on well, however after the first couple of washed the hydrophobics went south really quickly (bearing in mind I had not applied any of Turtle wax hybrid solutions wet wax or the detailer) once applying the wet wax on the next wash, hydrophobics came back with no issue. Think another go will be in order, thanks for another great vid and tips.
Thanks Phil. One thing that is clear is the fact this probably the most unpredictable product I have ever used in my life. Next ceramic spray I got is from yum cars so that should be interesting because they are seriously good
Glad you revisited this. I fully committed with their system, decon, polish etc. Waited 24hrs and still the spray was difficult to apply. I ended up doing similar to you, multiple clothes. The car looked great...in the end!
If I was doing it for a living I wouldn't reach for it either
Protection seems good.
Deffo not putting it on my Windows😁
Cheers, Simon
Well done. I didn't have the patience to do everything over 48 hours but may consider it soon though
@@epicautomotivedetailing I squeezed it in to the garage and did it over a few days during lock-down in between working at home as car wasn't in use. Wouldn't want to do it again LOL.
@@Simon-kh2dd no I understand mate. These days we just want something quick and easy 👌
Love this stuff. Spray your towel and the panel. Give it a heavy crosshatch coat. Use the slightly damp towel to smooth it out. Reapply in 24 hrs and you are good to go for months.
Watched it now thanks.With the Black stuff I used the polish first and did not wait 24 hours still worked well. Black cars always a challenge.
Thanks I'll order some next month and give it a go 👍
Dave, give the Yellow wet wax one a go. That is good. No smears! Good on you for trying this product again...I am still stuck with a bottle of it. Ceramic coated the rubbish bin the last day :)
Lol I was going to spray the bin too. Glad I tried it again as it shows that all reviews can be different based on the weather or temperature
Yes, women do watch this! Very helpful video 😊
Lovely 😃🎉 thanks for watching 🙏
Just got in, from doing the Ceramic Turtle-wax on my Jag XKR, medium Pearl grey, I washed & clayed, then (with trepidation) began applying the “stuff” as directed but like you, quickly changed over to squirting directly to the micro-fibre. I did the windows, chrome and paint-panels all at the same time. The stuff is brilliant!! Looking forward to doing again in 24hrs. 👍🏻🇨🇦😎
Nice one. Well done
Just got pointed to you from Paul Dolden - like the content and your style, well done fella. Subbed.
The TW range has worked for me on 2 cars, wife’s selenite grey merc and a pearl red DS3. Merc was in very good nick, it lives with me so gets good, regular, careful maint washes and had a 2 stage DA Megs 105/205 minor correction the previous year and sat outside by the sea under NXT wax. Been a Megs guy for years but fancied a go at some weekend warrior ceramics you can use in the open, and TW reviewed well for that purpose at the start of this year, so went that route four the merc’s spring spritzer.
This time, (hot April sunny weekend) it got a foam, wash, clay, TW ceramic one stage DA polish and then TW ceramic spray coated the next day - an unseasonable hot day. Result was fine but you had to be quick in the sun while spreading fairly lightly in a cross pattern and I used the damp towel before final buff too. If you try to rub too hard or buff the initial spray application, that is where the problems start imo. Just get it sprayed on, immediately spread it relatively lightly, give it 30 secs and use a damp towel to level it before the buff.
Daughter’s DS3 was a bit of a shit box, not much maint washing done in 3 years of her ownership. Seemed softer paint than the merc, so roughly the same process, foam, wash, Tardis lower half, clay, single stage TW ceramic with localised 2 stage in problem areas, and all was good again in the hot sun on quite darkish pearl red. This time it was windy so I sprayed it it to the towel instead of to the car and it also worked fine.
One thing I do like in their range is the ceramic wet wax. Super easy to use and maintains the hydrophobic properties, meaning that I probably don’t have to use the ceramic spray coating as often as I would.
Just done my silver Freelander 2 this weekend which was in a right state from the previous owner. Used old school decon routine with lots of Tardis down low, a clay and started on a TW ceramic machine polish on the bonnet. It didn’t touch most of the defects, so will be going back to Megs 105/205 combo (or heavier if I have to) to get that right on very hard (seemingly even harder than the merc) paint when I have more time. Then it’ll probably get a TW ceramic spray over that, but for the moment it will have to sit under some old Megs NXT wax protection with its defects intact but looking okayish from 10 feet away.
I see the TW range as a keen amateur’s product that gives good results IF you follow the instructions to the letter and recognise their limitations - especially the one stage polish, it is very mildly abrasive. Using the maint wash ceramic stuff seems to keep its hydrophobic properties going well. But that stuff isn’t cheap (unless you just buy 2 bottles for 22.50 with the 10 quid off 30 quid spent discount code they just reminded me I had)!
TLDR, horses for courses but it meets what I expect of it.
I must thank Paul for the mention. I've got the hang of it a bit more now. I was bang out of order saying what I did but i was expressing the anger that many people had with it. It's working great at the moment now the Temperature has dropped. Thanks for watching mate 👍
TW still suggests you apply in shade, but overcast or early morn, or near sundown works well too. I have found that in higher temperatures, besides shade, it helps to apply by spraying a slightly moist microfiber towel with the product, then levelling any stubborn buildup with the the clean side of the moist towel.
Going to give mine another shot today, will defo spray onto the cloth too. Makes sense to me!
Nice one. We got hotish weather today and I'm having day off so may try few more attempts
Dave this stuff is rubbish simply because you really need to get the car indoors if you live in the UK. The weather here is messed up all the time ie. too bloody hot or drizzling rain and to get 2 days the same even for the likes of me (weekend warrior) its too involved with just too many things to make it take longer. The 1st vid was spot on lol all the ladies have told me so lol. Keep it up and stay safe.
Cheers Jonny. Yes it is rubbish, but then it is very good too... Confused, you should be lol. It all depends on so many factors. So I was fortunate on this day but I wanted to prove a point that the product can be so hit and miss
I like your honesty. I tried this on my grey astra the week before your vid and i wasnt impressed. I've GT'd mine and its looks great. I prefer turtles wet n wax. Used that on my folks car and its great.
And show some love for your nan's Volvo! Looks ace. Nice wheels 😁
Lol didn't want to risk it on a valuable car 🚗
I liked turtlewax ceramic wax product worked for me! well done for trying again and yes we all make mistakes
Yeh it's not as bad as first thought. Still want to test it on a dark paint again
I had a major problem with smearing with this product on my black fiesta. I would have to do tons of buffing afterwards with a damp cloth and then a dry cloth. I think ill try your methods of spraying it onto the cloth and also making sure its a cool day.
I promise you once you crack the method it's actually one of the best ceramic sprays by far
Tested this on a black Tesla yesterday, and almost had a heartattack when I tried wiping it off. Streaks everywhere. Then I learned, use a damp microfiber in one hand to wipe out the 2-3 sprays with. Then use a dry microfiber in other hand to wipe off with. Worked perfect.
Amazing stuff 😎
I had a Similar Experience the First time I used it,,I think my Second Application was Much better But I Don't know why . I put it on my 2020 Barracuda Silver Low rider S Harley Davidson.. She looks Super..
The temperature can be a huge factor i have a new video on the graphene paste wax tomorrow hopefully
Thanks for the educational video ... I'm off to my Cessna 180 to give it a birthday ...
Nice one. I done a few Piper arrows 🛩️
I wouldn't worry about it blowing into the glass. I use this stuff instead of rain-x now. It's way more effective in my tests. I guess, equally effective but much longer lasting. just needs a dry cloth to wipe smears off at the end. I also just apply it in my garage, rather than taking a chance on weather. I've had awesome results with this on my dark grey Golf.
It doesn't say anything on the bottle I have but I'm sure my last bottle said not to use it in direct sunlight. Might have been the issue with the last car.
I havent used this product much since. ODK waxes solo is a good alternative 👌
The Meguiars Hybrid Ceramic wax can be used on glass as well as bodywork so over spray is never a problem. More to the point it is excellent on both glass and bodywork too
love a bit of meguiars
No your not a dick mate, your a pretty good detailer, and that’s coming from a bloke that stuffs up on most bloody detailing jobs on my own car. 🖖
I love this stuff I put it on my windows and all. It's a black truck and is very hydroohobic
Great job!
This stuff works great on car as well as glass and trim , rims and wheels!
Thank you very much
I just used it on Mercedes brand new rims inside and outside I hope it last a long time against all the brake dust
Used this product when it first came out and hated it, so streaky and a ballache to buff off. However tried it again recently and it was absolutely brilliant and so easy to use. Strange
Yes mate exactly the same for me it varies on so many factors
That product is good the thing is a little tricky to work i recommend use a aplicator pad the be microfiber towl
Got a new video in this coming out at the weekend my friend. Going through the process on black paint. It's definitely unpredictable that's for sure. Some days it's easy some not so easy. Never known a product like it
I’ve just tried the Turtle Wax Ceramic range for the last couple of months and It’s pretty good but not blown me away. The all in one polish was excellent stuff. I found any streaks are easily sorted with a slightly damp microfibre which is common on a lot of these SiO2 sprays. I’ve recently tried a sample of Car-Chem Lockdown which is a similar spray sealant. I think it was slightly easier to use but a damp MF was still required at times for the odd streak. I have a few Garage Therapy bits on their way including Three so I’ll see how that compares. I’m planning on using that in a month or two to see me through the winter.
Nice one Chris yeh think more winter tests are due I got 2 more ceramic sprays that I may film later as it's freezing today. Let us know how you get on with Garage Therapy 👌
When you say “damp MF” do you mean damp with the ceramic spray or damp with water?
@@andymike6575 Water
Holiday tickets in the post from turtle Wax ☺️. Another good review. Easy to get frustrated like you did in the first video. I use turtle wax rinse and shine. I think it's easier to use than the ceramic one.
They won't ever invite me lol. But I'm providing so many points. Even though the last videos were negative I still think they need to rethink the marketing strategy and be more relatable with their audience. Thanks for watching mate
Exactly Same issues with me mate, it takes ages to buff up. Actually binned it after 3 try’s. I’ll give 1 more chance. 👍
Its good of but I've not used it since. Way too many products out there now
Ok, I used a quick trick someone sent me after my earlier comment.👍
Here it is-
Apply the Polish as advised, then wipe over with a damp cloth (almost dry) - then proceed to buff up!
Doesn’t take as much effort and
It is absolutely amazing!
Can’t say any more than that!
Good luck.😁👍
@@petesefton8545 did you allow for any hazing time or did you use the barely damp cloth immediately after applying the product?
@@wilacam11 I originally buffed up straight after rubbing with damp cloth. Only 30 minutes ago I used it again for a second time and it’s worked a dream without a damp cloth. Absolute pleasure to use. Spray on , quick polish off. Yep, 1st coat a nightmare but 2nd + brilliant!
Hope this helps?
Bonjour de chez moi en Guadeloupe j'ai acheté ce produit pour ma voiture 🚗 et je suis très satisfait
Hi! thanks for your video, is it better to wax the car before applying the ceramic coating?
“Keeping a T shirt on for the woman” hahahah, nice one. I’m just about to head down to the garage and apply the first coat of the ceramic spray after a full wash, clay and Hybrid solutions polish and wax 24hrs ago. Ill wait another 24hrs to apply the the 2nd coat and I’m uploading the whole procedure for the “weekend warrior” out there.
Thanks for the tip about spraying on the cloth,, great video btw.
Thanks John
@@epicautomotivedetailing
Did my brand new Polo yesterday, (Reef Blue /Black roof), spraying it on the cloth,, no streaks or smears, !!!,, also did the diamond cut wheels too, !! Looks fantastic,, thinking of getting the Auto Finesse Lavish, as a maintenance treatment, what do you think, ??
Another great video Dave. You made very valid points about the weather and the car's colour. I think I would still have reservations about using that Turtle Wax ceramic spray coating on a dark car and I definitely wouldn't use it on a hot day. I just don't buy into this ceramic spray hype. I would far sooner use a product that's easier to use more regularly. That Volvo did look great afterwards though I have to say.
Thanks Karl j needed to put this one up. Because so many people have good or bad experiences and it seems so 50/50. I don't love the product but based on that car with that paint it did well. It still needs some tweaking and no I wouldn't use it again on a hot day with a dark coloured car but it has made me rethink a few things. Thanks for watching mate 😊
Bang video dude I've tried some turtle wax hybrid solutions and it doesn't spread easy it's robust but a bit of a ball ache buffing off and yes much better to spray it on the cloth thanks again 👌👍👏👏👏👏😊
After testing on several cars, I apply with an applicator pad, buff, wet towel, buff. A lot of work and STILL may find some streaking which i take out with a traditional carnuba wax. I am definitely not over applying the ceramic product. I did have some good results with the Ceramic Wet Wax but the Ceramic spray coating is much too much work for me. I'm coming to the conclusion that I need a product that hazes for streak and coverage control.
Next video is all about the streaking on a black car which comes out in few days. Thanks for watching 😊
I have similar problem. I've just recently used this for the first time, I washed/dried, decontaminated vehicle (tar/iron/clay). I applied two coats, (24 hours apart), following the instructions to the letter. Everything seemed ok, no streaks/runs/excess etc. Dry streaks started appearing approx 4 hours after application of both coats, which were extremely difficult to buff off.
I take a damp micro fiber two sprays level it out let it set a few seconds an buff off works out perfect
I just applied this today, only had the car from new for 2 years so didn’t bother clay barring or polishing (although there were a few tar spots) So I washed the car Meguiars wash n wax and then tried it. I used a meguiars applicator pad to apply, another cloth to buff off and then another one to really make sure it was silky smooth. So far it looks great. I have previously used meguiars hybrid ceramic spray wax and while the beading on that was amazing and Better than this turtle wax tbh. It literally came off after one wash with meguiars wash n wax ( a ph neutral shampoo) I applied it perfectly and it was great until it just came off. I reapplied it by spraying on wet car and rinsing off but it was never the same. So I’m hoping this turtle wax has better chemical resistance and will last longer, although I’ve only done one coat so far
I did a recent video on a karcher and I returned to Tesla model X few months later after applying this. I have to say it's unreal ⭐⭐⭐⭐⭐ I was way too quick to judge First time using it
@@epicautomotivedetailing great thanks for the reply
i tried using a damp rung out quality rag company towel to applicate this stuff . then let it haze and wipe off with a dry towel. seemed to work well and even. It was 5 am and humid. The towel seemed to "grab a little but eventually got smoove . I have a new black truck so paint was good . I hand washed and clay toweled first.
Well done.think people have so many different experiences with this stuff
At least you gave it another go Dave and to admit you made mistakes in the previous vid is pretty good of you. I’m still not sold though as you seem to need to many things going in your favour for it to work quite well that said you never know I might try it one day. Oh yeah and I’ve got a dark car 😂
Thanks Steve. I just want to help as many people as possible better to be honest that I was bang out order. But yeh the product doesn't do was well in the heat. I tried it again today and it was fine so it's definitely a temperature thing
Can you apply it in cold , in like +5 Celcius ?
If you apply it on top of Glaze , Poor's boys black hall for example .
How long both of them last on daily driver kept outside ?
This is easier to apply in colder conditions
From watching this video, there appears to be much better alternatives.
Yeh there is definitely better alternatives but hopefully this kind of clears my name a bit because I was too harsh in the other videos and the biggest factor that can make or break this product is the temperature. But then again this was an old Volvo 😂.
Thank you for watching
@@epicautomotivedetailing I don´t feel as if you have to apologize for yourself. If a product is more of a hassle compared to competitive products, i think its fair to say so, being an experienced valeter and detailer.
Really fantastic on my silver Audi, bad smearing on dark Ming Blue Metallic.
Great video! I bought some of this today to use on my new Tiguan and wish I hadn't bothered!! I followed the instructions, washed the car from top to bottom, dried it and then felt i had to wash it all over again! It did nothing but smear the paintwork which I couldn't seem to remove easily or polish out! I ended up using a different product entirely just to tidy up the mess this rubbish left behind! Never again!
Hi Dave,it's the same process as the GT application,but you have to do it in the right weather conditions.
Yeh weather seems to be the key, weather & patience. Two things I don't always get lucky with 😂
Awesome vid Dave , just done my dark blue metallic car with this 2 coats 24hr period and first thing in the morning in the shade , then back in the garage. It does smear and a wipe with a damp cloth gets it sorted . If used like your GT 3 video it works . It's shit on hot panels and in sunlight ,smears like fuck ! By the way tried your window cleaning method on interior glass and it's spot on , no smears and great cleaning . Keep keeping it real Dave :)
Thanks so much. Please give me a share on that glass video 😅 I need to tell the world about it. I need an OBE by next year lol.
@@epicautomotivedetailing You need a knighthood for it lol Sir Dave !
Lol thanks I know you're 100% right
Epic vid. Got a bit scared for a moment at 3:53 thought the crappy background music from meguiars videos was following me about. Once I got over that thought great vid as usual thanks Dave (first vid you appear uncomfortable with products I've seen) as supporters of your work I take your opinion seriously. I prefer turtle Wax sealant/ice. Leave the old vid up. Balanced view different days different car. Real life experience. I don't think any less of you. Thank you for the videos.
Dave. Need an index/ quick ref attached to each vid. There is two I need to find in back of my mind. I saw briefly or heard you mention. That I will try and find now.... 1: applying products to black cars. 2: your window method.
H Dave, I do think you was right in your first video. I think there are better products on the market. 👍
Yeh there definitely is better out there but had to do this one to prove a few valid points about the unpredictable results
Your doing a great job keep the video coming.
For a 1yr old car with a weekly automated carwash - can't DIY- no water supply in my garage, do i need to apply rubbing compound first before applying the ceramic spray?
Thanks for the vid mate i used it on my black car it was naf to start with then the damp cloth trick and all was fine no problems i will continue to use it until its empty then may try something else not one for shelves of half empy tubs but thats me and the flunky is still working
Well done I probably should of just carried on with the old video till ingot it right but glad I tested it again. It wasn't too bad but then this paint was very different
@@epicautomotivedetailing I still like using wax though and my old winter combo of collinite 476 topped every 4 washes with aqua wax got me through 6 months no problem
@@simonturnbull5011 go for it. Whatever works for you so many people are so quick to judge if you use a product that they don't like. I'm the same use what makes u happy 👍
Just used for 1st time...hard work on glass! Car is brand new and white so hard to see any smears. But i think there are some. Not that easy to use in my opinion. Now for the 1st rain shower to see how it performs.... the main reason i applied it
Well you've inspired me to give my Turtle Wax Ceramic coat a second chance. Did it yesterday in hot temperature, on my black car and it wasn't very satisfying at all.
*EDIT* literally just gave it a second application and it kinda sucks on my black car. Had to wipe off the rain first (because it's the UK and a whole 24 hours of dry weather doesn't exist). It still went on streaky. Doesn't add any shine, or enhance the look of the paintwork in any way. Just makes train water bread up on it.
If it keeps making rain water bread up on it for a year then that will be a good thing. But trying to use a product the needs 24 hours of good weather just isn't going to work on rainy Brexit Island, lol.
I'm the same, mines a blue car and was a nightmare on security glass. I think it's best to just use the wash and wax product and wash frequently to let the product build up. This ceramic spray needs quite abit of work it seems.
Autoglym rapid ceramic is a better alternative. Shorter durability but better for regular users
Yep 100% not good enough. The graphene isn't massively better. The only thing I dislike is application process
I have a car this size. It only takes me 7 minutes to do. This isn’t rocket science just spray it on and wipe it.
I admire the fact you took the time out to give the product another go by making another video with a different car. So couple of comments..firstly (and correct me if I'm wrong) but isnt the product you used a protective 'coating' more than it is a polish? And since TW also do a ceramic polish (which is also a cleaner), to my mind it makes sense you perhaps should use that first THEN apply the coating product? I think the way you have done it is you have tried to use a 'quik detailer' coating product as a type of 'all-in-one' which its not and I doubt theres any product out there which is. If I'm right it might explain why you got better results on this car than the one in the previous video, since one explanation is the paint on this car was already in better condition when you started than it was on the Range Rover?
Hello David, yeh your right it's a protective coat not a polish but the idea I wanted to point out that most people using it wouldn't of bothered clay barring or polishing first. People only read the bits they want to see. So the way it was marketed was like this (spray on wipe off for a perfect finish) but to get that finish u need to do all the steps before hand to paint. So that's why I was annoyed too because I wanted to get in that mindset of an average Joe. For me the reason this sucked was because of the weather. I truly believe that was the difference between the applications. Range was done on scorching hot day. Volvo was done on cool day so I think that's the reason it didn't quite go to plan. That and the fact I wasn't having a good day anyways lol
@@epicautomotivedetailing Yea I totally get it. TW I think have produced a great product with this ceramic range by all accounts but have done themselves a disservice in the way the coating product is marketed. In fairness though, its not dissimilar to what their competitors do. To my mind though watching your first video I didnt really expect an amazing result from a spray on wipe off product lol. Products such as this are for detailing after all the hard work is done. There's still no substitute for hard buffing with a good polish/cleaner (and a clay bar first if required). I've just ordered their polish and coating (even though my cars only 5 years old and the paint is in great condition) and I expect a great result used in that order. I suspect you using that coating protectant on an average paint and in the sun just resulted in the product working its way into the degraded paint instead of sitting on the surface. From there it sounds like it became impossible to get out with the resultant average finish.
@@DavidTron63 was a really silly video on my part. I'm waiting for colder weather to try it on a black paintwork as most tests I've seen are all in hot conditions. Thanks for watching my friend
@@epicautomotivedetailing I'm subscribed :)
@@DavidTron63 thanks mate your supporting a small channel so I'm really greatful
Do you think Meguiars microfiber towel is ok to apply the product ??
Yes but you do need a few towels, cloths especially on darker cars. However I will say this is a great product
@@epicautomotivedetailing thanks for your reply !!
Thought you were making a big fuss over applying it BUT NO tried it yesterday could not spread it what ever I did had to use a damp cloth on it took me along time going over it and not knowing what was left on paint after wards. The other thing was I found some spots of air deposit had embedded into it before it cured which is 24 hr not good for outside work and don't know if I can get them out when its cured. In the bin with this product for me. Shows your review was Honest This may work under ideal conditions but not in general use
Thanks Barry, I was very harsh but yes to get this to work u need 100% perfect conditions I feel. Cool cloudy day no heat and a lighter colour. Yum ceramic and garage therapy are better in my opinion
The probem with this spray is it has to be sprayed on the car directly. I wish the flash point would be a little slow so I can use it on an applicator pad to go through those nooks and crannys without over spray.
It's a nightmare product for most people
Hi, Thanks for these Epic, genuine and humorous videos.
I bought a car 2 months ago (Turquoise colour). I live in the Philippines where there is no cool day and I need to wash the car at sunset to avoid direct sunlight (+35C). I use deep-well water (lots of mineral deposits) with a pressure wash, shampoo and rinse. I don't know how to decontaminate etc. to prep the paint, ideally, I would prefer to skip this.
I'm looking for 2-3 products (max) to clean, protect and shine my car. I don't mind spending 30-60 minutes to apply a product if it's less than every 2-3 months and would have quicker washes every 2 weeks or so. If a product can limit the water spots from the brackish water, it would actually save me a lot of time. What product would you recommend? (Turtle Wax lines are available and decently priced).
In my situation, would you choose the TW Ceramic & Graphene paste Wax, the ceramic coating spray or the graphene? (or something else?)
PS: If it makes a clear difference, I may consider an extra product to clean the interior and the tyres.
Thank you! to be honest don't over think it. im not actually half as fussed as i used to be and it helps keep the sanity lol
Thanks for sharing. Do you discard the cloths, after use?
With these I wash by hand then demote them to wheels
What is the regular maintenance for coated car. In my area lot of dust we have. Do i need to add wax or shampoo wash is enough
Hello no wax needed. Just a quick detailer is enough to maintain for a few months
You can apply the product on glasses as well btw :)
Thanks for watching! :)
Dave, I bought 2 bottles of this and I can’t work it out? It seems to stain on the panel. I’ve been valeting for years. It’s the only solution I’ve had trouble with
It's a nightmare mate. I'm surprised they still sell it to be honest
I have similar problem. I've just recently used this for the first time, I washed/dried, decontaminated vehicle (tar/iron/clay). I applied two coats, (24 hours apart), following the instructions to the letter. Everything seemed ok, no streaks/runs/excess etc. Dry streaks started appearing approx 4 hours after application of both coats, which were extremely difficult to buff off. Has anyone else had this problem?
Damp clean towel is the key to removing it my friend
You definitely had an easier time on the lighter silver paint, but that's not something unique to this product. Heat also definitely a factor. I struggled with an application on my car which was inside a garage in the shade, but very high ambient temperatures and I was not prepared for just how quickly the product was going to cure. In hindsight I needed a different day, or certainly less product and working in smaller areas at a time, even dividing single panels up in those conditions. Lastly I think the GT three application technique is a great tip for any of the spray sealant products, especially starting with application via a pad or cloth as you also found. You can see why TW mindful of the mainstream consumer would have not thought need for 3, possibly 4 cloths to apply a great selling point. It seems the longer the longevity claims, the trickier the product to work with and more care required. Seems reasonable really. For the stress free and easiest experience, just use a hybrid qd and apply every 3rd wash, or as often as you like. Take your pick!
Thanks Graham. I appreciate the feedback. I had to bring this video out while I'm covering more ceramic based videos. I think people just need to be aware that the weather can be such a huge factor. I will try this again on a black car in the winter to see how it works in the cold. I love GT three. The gloss is insane. Looking forward to seeing their new ceramic coating soon when that comes out
Hello. Do you recommend this product to a newbie :) which doesnt have a garage. I will apply this thing outdoors like you. Will it last 12 months with 2 coats? Do i really have to wiat to apply second coat?
Fair play! Good on you for giving it another go. Too fickle for me... and not enough benefit. Cheers, Ste
Had to do it on got to see through a fair test. It did ok to be honest. But then it was a lighter car so I'm still not 100% but it's interesting to say the least 👍
It doesn't hurt to get it on your windows, in fact I use products like that on my windshield and love the way the water beads oof.
I sprayed my bumper an now it’s gone dull tried to polish it with meguiars but it won’t bring the shine back any recommendations how to get the shine back without having to spray it with clear coat again
Trust me it won't last that long. Use a shampoo that can remove old waxes or clean with stronger alkaline products and you'll soon remove it
Product is not bad like protections, but is so hard to buff.
so I just got this stuff, was going to clean my car and then clay bar it. but can I wait till the next day to spray this?
Every review says it is easy to apply, and today I bought and try. As you said it is not easy to apply. Once it starts dry it is impossible to buff perfectly. The solution I find is, apply with applicator, buff with a microfiber and second buff with another microfiber immediately very fast. Othervise oily paint and I could not fix with buffing.
Even Fusso coat is easier to apply than this product.
after applying to my car, the panel I have appied to collecting more dust quicker then before
that could just be very unlucky if its windy whilst applying. Once its cured it shouldnt do that at all
If it rains before the 24 hour curing period will it ruin the coating? Will I need to re apply it?
Really love your videos
I have tried several of these spray-on "ceramics" and they ALL leave nasty annoying rainbow streaks all over, no matter what temp. I wish you'd done this on a dark car like you did the first time, but on this cooler day. I hate buying $15 magic spray-on and getting disappointed, again, and also spending half an hour trying to clean up all the streaks.
No worries I'm doing one promise. I'm waiting for temperature to drop a tad more to see how it works in the cold. If you want quick and easy try cartec fast glaze it's pretty incredible
@@epicautomotivedetailing Awesome, thank you! I have a dark blue car and man the streaks, spots, and "oil sheens" are tough on it as you're aware. I think I'm going to give this a try soon, my last wax was in March so it's about due. Hopefully it applies on top of a wax okay. I'll start somewhere other then the hood. :)
Hi Dave mate, great video as always. Thank you 💪😉😂 not to bad then..
It's hit and miss mate. So I had a look at the Volvo this morning and tried a water test with one coat and loved it so the biggest flaw is the application process. Unless you get it right in good temperature it does cause problems. I've never known a product to be so random but this time it was easy to apply 👌
Epic Car Show Detailing lol 😆 that GT is something else 😮😍 definitely going to get some of GT’S products..👍
@@daveroberts703 yeh GT is great. I'm still going to use turtlewax up eventually as I think more testing is needed but it did alright on this occasion
Can i used it on ceramic coating , maintenance? Is it safe any ceramic coat thanks
Yes 100% safe. I prefer ceramic quick detailers for maintenance though
Great video as usual bud. Which fo u prefer this or the meguiars ceramic liquid wax
Meguiar's hands down mate 👍💪
Thanks again for watching my videos appreciate anyone who takes time to watch and comment
@@epicautomotivedetailing there really useful and they do help very informative. Keep it up cheers mate
@@simonattwood4363 thanks Simon
8:09
I am a woman and I’m watching 😂
Lovely thank you 🙏😃
hot days are not days for polishing waxing and stuff like at least you gave it another go and not leave it in the box of shame
Thank you
Thanks 👍
Welcome 🙏
How does this differ from the hydrophobic wax? Ive used it for some with realy good results and no streaking.
Does it protect from minor scratches and swirl marks??
Another great video and loved your crack.
Thank you