Ford Focus water pump repair - 2012 - 2020

Sdílet
Vložit
  • čas přidán 15. 08. 2022
  • Remove leaking water pump on my 2012 Ford Focus and reinstall replacement part.

Komentáře • 14

  • @CARRJ142
    @CARRJ142 Před 4 měsíci

    Nicely done, Thank you

    • @10947792
      @10947792  Před 4 měsíci

      Thanks.....hopefully the video helped you.

  • @NG-tz8wo
    @NG-tz8wo Před rokem +3

    I noticed the same thing other videos didn’t have the AC lines over motor mounts.

  • @fairfax_fran5109
    @fairfax_fran5109 Před rokem +1

    The water pump is easy the thermostat is a lot harder

  • @thevoiceboss8220
    @thevoiceboss8220 Před měsícem

    How high are you able to jack the motor without damaging any lines or hoses?

    • @10947792
      @10947792  Před měsícem

      At least 3-4 inches. I was continually checking and stopped as soon as I had enough room. Good luck with your repairs!

  • @TrevorHarvey-yi9zl
    @TrevorHarvey-yi9zl Před rokem +1

    I have a 2010 Escape. The water pump is in pieces and still wont cone out. I am worried I may have to scrap it over this.😭

    • @10947792
      @10947792  Před rokem +1

      Ensure all the pump bolts are removed....I made the mistake of removing one of the timing chaine cover bolts thinking it was the pump bolt. my car's pump was really corroded and was fused to the engine block. it took numerous hammer hits to get it to break free. the trick was using a tool slim enough to get between the pump and engine block.

  • @NotYourAveargeAlien
    @NotYourAveargeAlien Před rokem +1

    Just one thought, take your I watch off when working on cars, its only a matter of time until you regret leaving it on! 😥

    • @10947792
      @10947792  Před rokem +1

      very perceptive.... i had to trash that watch shortly afterward because I broke the watch glass working on my truck!

  • @randallcearley2363
    @randallcearley2363 Před 6 měsíci

    What if it still leaked what to look for

    • @10947792
      @10947792  Před 6 měsíci

      was there any pitting of the metal where the o ring seals? were all the pump bolts securely tightened? was there any debris on the o ring mating surface? did the o ring tear when it was stretched to install on the water pump? defective water pump?....I recently purchased two, brand new fuel pumps for another vehicle/project and both pumps were defective.

  • @corygoulette2303
    @corygoulette2303 Před 10 měsíci +1

    What year is your car ?