How to Replace Water Pump 2012-2020 Ford Focus
Vložit
- čas přidán 25. 04. 2022
- Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ic/1AEWP00091
This video shows you how to install a water pump in your 2012-2020 Ford Focus. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 13mm Wrench 1aau.to/oa/1AXAA00010
• 15mm Socket 1aau.to/oa/1AXAA00015
• 18mm Socket 1aau.to/oa/1AXAA00043
• 8mm Socket 1aau.to/oa/1AXAA00017
• Coolant Funnel Set 1aau.to/oa/1AXAA00116
• 1/4 Inch Ratchet 1aau.to/oa/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXAA00015
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Block of Wood
• Brake Parts Cleaner
• Floor Jack 1aau.to/oa/1AXAA00068
• Rubber Mallet 1aau.to/oa/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks for not editing out things that take longer to remove, show us all what we will face!
Just did this tonight, 10 min. to remove overflow tank, a/c line, motor mount, upper tensioner pulley, support jack engine up ....45m to remove the corroded water pump to the mating surfaces just like in the video.
TRQ saves the day once again!
Great video... Thanks... Added tip. I bought a $10 strap wrench to hold the pulley while loosening and tightening bolts. Worked like a charm.
You have my respect best ever step by step guide I've found after searching on CZcams for almost a month❤thank you
Great video. Super easy to follow. Keep up the great work TRQ.
I'm doing this on a 2012 ford focus and I have the big ac line going right past the engine mount. It definitely makes it a bit harder.
Real world issues and all, great video, thanks for the lesson on the water pump.
Best water pump video ever.
Brothers, GOD BLESS YOU!!! Amazingly well done 👏
Easy peasy. Most informative video for this job. Completed replacement and drain/fill coolant in 2.5 hours. I was also taking my time too. Thanks!
+@chrisfernandez3329 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Really convenient when you don't have A/C hard lines running over top of the engine mount
Thank you for the very helpful video! Finished mine this afternoon
Really appreciate it. It's was straight forward and easy to follow. Thank you
Love the explanation of the torque specs!🙌
Realy good bro, i'm mexican and, i didnt speak English well. But your videos are too easy to understanding.
Absolutely fantastic video, thank you!
Did you have to put a jack under the engine when removing the engine mount?
the guy screaming halfway thru : *FORDDDDD!!!!!!*
This guy is all pro 😮
Great Video , thanks for your time and knowledge.
Piece of cake!!😅 Dealership wanted $550 for this job
Exelente!!! Saludos!!!
Very easy good job
I just changed the thermostat and im getting ready to change the water pump. I hope this is the reason for my overheating.
Needed this thanks!
Thank you!!
Wonderful!! One question: What type of 3/8ths impact wrench are you using? I need one!
Great video 👏🏾👏🏾👏🏾👏🏾
Great video
hello, excellent tutorial, didn't you need a hydraulic jack to support the engine?
What did you use to clean the engine bag of corrosive material (coolant)?
You have to use thread locker ?
I was watching my mechanic work on my car and he had placed some sort of silicon onto the water pump where the rubber is located. And after two bottles of 1.5 Kool-Aid he mixed it with water, how would you rate this job?
Great video. But how did you get that coolant tank so clean?!
....LOL.
It’s a new one I was like what the heck went from old to a new one. I replaced mine thinking it was the tank leaking and it’s the water pump.
Today I was driving ford focus 2012
And an a dashboard was sign motor over heating
I stopped an the side of the street and
Opened hood a little smoke but coolant everywhere and the passenger side I called towing to tow the car
My question is (can be water pump bad ?
Thank you for any advice
Is it possible to take the wheel off and cover and do it from the side?
I wish i could fix it myself
How many inches can I lift the engine?
There was a stubborn stripped bolt and was hard to get to.
should you change tbe WP before it goes bad 🤔
I took the tensioner off and with 8 inch punch, angled it and with a couple wacks of the hammer, the pump came right out
What’s that stuff called you sprayed
Overflow tank is different from the original video, is there a reason why you edited the video with a newer ford focus
Keep in mind if you are doing this, there will be AC lines that are not shown in this video that go over the motor mount.
Can bad pump failure cause water and oil to mix ? I don't think soo
No
Can you replace just the o ring instead of the whole water pump?
What size are the water pump pulley bolts ?
13s ?
Is this the same as 1.0 liter eco boost 3 cylinder???
+dylan monen This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
i tried getting one out of a junkyard today and i broke its legs trying to pry it out so corroded into the engine. i think someone ran straight water which welded it on.
went to another car and got it out without beating it up too much. i wouldnt pry on the shaft bearing if your resuing. get a screwdriver between those legs and hit that driver with a hammer itll come out
Thanks so much brother! You saved me a lot of aggravation and experimentation. I just got done putting mine in!
My 1.5 ecoboost not the same as tensioner not in same place
For a second it looked like you forgot a bolt in the water pump trying to pry it out...good video tho
just get a bigger hammer 😂
89 inch pounds = 7.4 foot pounds torque
ford repair video:
-first step is to remove the engine
Excellent! Of course I lack an engine hoist and a means to get to the underside to drain the radiator. By the way, you opened the radiator drain, took off the expansion tank cap to drain quicker but I didn't see you close the drain. Naturally, the water stayed in the tank so you must have closed the valve. 🙂
A lil Vaseline will make it nice to slide in...
Nice video. You did skip the step closing the drain valve on the radiator. Just an oversight I am sure.
DIAPERS NOT PADS
I can always spot a rookie repair when twice as many parts and time are spent removing a Focus Water pump. Its also a good way to break otherwise good parts. 20 year Master Tech and vocational instructor definitely earn this advantage. Its always the girl.