Just an FYI from some research: There is really no consensus on mortar vs brick.. Each has it’s own merits... brick is stronger but brittle and can have air gaps internally... mortar is softer but less likely to crack...(provided it is strong and in good shape and was not mixed poorly)... attaching to mortar you can (and should) use wedge anchors as they are very strong, but would have a tendency to crack brick...which is why on brick you use tapcons, sleeve anchors, or lags with sleeves (and liquid nails if sleeves are plastic is smart idea)...also with plastic sleeves place them so the slits are horizontal (so they expand vertically) which makes them more resilient when hanging things like TV mounts. Also with mortar mounting you always want to mount to the HORIZONTAL mortar lines (since the weight pulling down applies pressure to the rows of bricks above and below). Mortar is easier to repair as well, but your mortar lines might not be perfectly straight which can make staying in the mortar line difficult. On top of all this, you may not have alot if choice due to where your mount simply has to be placed on the wall. Both work, but just be aware that wedge anchors should be avoided with bricks but SHOULD be used when mortar mounting (other expansion types like lags w/sleeves work as well, but wedge anchors are the best for mortar mounting). For brick mounting use Tapcons, Sleeve anchors or Lags with metal or plastic sleeves (and liquid nails with plastic sleeves). I know I repeated this last part but it is the important difference between the two ways to mount...i.e. What to use... BTW, never a bad idea to practice on a spare brick first if going the brick route. And, of course, a hammer drill (with a good bit) is worth the trouble to buy/borrow if you don’t own one. Not that you absolutely need it, but if your material is really solid (which is a good thing) and your drill/bit is subpar (not a good thing), then drilling can literally be an all day affair... trust me, I have been there! Even a cheap hammer drill (with even just a decent mortar bit) will make the task easier....and with a good bit, it’s almost easy... almost.
And for anyone worried about mounting a TV above a fireplace being uncomfortable, there's a great mantel mount on the market that lets you pull the TV down over the fireplace when you're watching TV: www.mantelmount.com/
thanks for this video. So many people being negative about the height of the TV. I think it would do me good to look up after looking down all day (devices, kids, etc) I have 4 kids under 5 and I can tell you a low tv is a dirty or broke tv. Hanging the basement one above the fireplace as this will be their area for a few years. Thanks again.
Very helpful video thanks 🙏 off topic just curious the recessed lighting over the fireplace looks very cool did you add them or are they original to the house
I dont believe this video was uploaded by the home owners lol its was just a video that was made for the company who fitted the TV to the fireplace all 3 of them 😂😂😂
Geez - such negativity. Thank you guys for sharing this. I know there's value to you as a business, but as a homeowner I found this helpful. Not sure why a handful of folks took to being dicks about it.
Good video but one quick question, how did you make the hole in the mortar at 1:46 to conceal the cables behind the TV? And what did you use? Thank you.
people move!.....plus tvs and mounts have been changing in design just as rapid as cellphones, its hung to be semi-perm. or until you move or throw a remote through the tv. all was considered but the decision is ultimately up to the home owner. whom decided in this case
We always use the mortar joints, we use an adhesive when we insert the plastic anchors, helps hold the lag bolts in place. over 500 tvs hung and no issues with mortar holes!
from good old BOB VILLA - Brick usually holds better and supports more weight than mortar. However, if you have old, fragile brick and you're mounting a heavy object that requires deep holes and expansion-style anchors, drilling into the brick may not be the best choice.
I removed the mantel and moved it down. I drilled into the brick and you have to pretty stay close center of bricks. To close to the edge and the bricks crumble. I use a 3/16 bit with 1/4 concrete blue screws. Becare screwing the screws in because they can break. Had that happen. I had to use longer screws 3-3/4" because the brick hole stripped out. Still haven't installed tv bracket. Calls for using a 3/8" bit for installing 4 bolts with plastic inserts. There's got to be a better way.
I believe you’re correct. I’ve mounted a few TVs and always added an electrical outlet behind the TV so it can plug directly into the wall while hiding the wires. I’m fairly certain it’s dangerous and against some code to run the power cord through the wall.
Hey Joaquin , I’m no expert, but I believe you’d have to mount one of those metal outlet boxes to the outside of the brick after running the wiring to an existing outlet near the fireplace. I’ve seen one method where conduit was run from above the mantle down to an outlet on the lower left side of the fireplace, and the wiring was run through the conduit. I assume the conduit was designed to protect from any excess heat from the fireplace, but that’s just a guess.
Hilti makes a great adhesive. We use it all the time when drilling and putting rebar in slabs to continues horizontal stretches. we also use them for anchor bolts when building strut structures etc. Really, anytime you use an achor, you should be adding this adhesive
Hello all! I’ve bought a condo with I’m guessing is the wall mount above my fireplace. I didn’t prefer to use this space for this however the size of my new living room is demanding it. I already have the hardware installed above my fireplace. Then the 2 large brackets with screws and bolts along with knob type adjustments only I don’t know how these pieces all all come together to hang my tv. I hope you can give me some guidance! Thanks so much!!
Use in-wall rated cables for one. But the bricks don't get as hot as you might think (there are layers of bricks, and probably a chimney liner which makes the most difference). Note the mantle was mounted to some 2x4s shoved into the brick cavity..
valid point, but depending on the circumstance. it will hold great, but try to fix the brick when the mounts then where bigger and heavier, as were tvs. plus factor in probability of need to remove . mounts are not 100% universal by far.
I guess since it only took four screws for the mount, the lined the mount up with a straight mortar line at the top, and just adjusted it horizontally until there was mortar in two spots for the bottom screws.
South Charlotte Services; you did not watch the whole video. He used lags WITH anchors AND glue.....I guess epoxy. Gonna need dynamite to get those lags off.
Great video !!..... I’m a plumber by trade and plastic anchors have never been trusted. We use toggle anchors better know as “butterflys”. Glue is cool but arms are better 💪
i'm so curious if over time the heat from the fireplace impacted the cables running through the brick. It's my biggest concern with this awesome setup!
Best way to know is to do a test... use an indoor outdoor thermometer (one with a wire for the outside sensor) or a wired/wireless oven thermometer to place in the cavity were you are running the wire...then crank up the fireplace for a good hour... then check the thermometer... if it looks good temp wise, then move the thermometer to different places along the cavity where the wire will be placed. The thing is that fireplace heat is pretty inefficient and goes UP the chimney... the surrounding brick acts as a heatsink dispersing and chimney heat into the air (in and out) which in turn keeps your house from starting on fire. Therefore, the brick work itself , especially the extremities (furthest from the fire should stay quite cool, barely above room temp). If your fireplace brick work is getting really hot at the edges, you have bigger issues. Since the wire start closer to the center of the chimney that should be the hottest area so it is the best place to start... and before even drilling, just put your gand on the brick surface, if it is already well above room temperature the you are already a no go (since the TV will nit be safe there). Hope this helps.
of course this is not a fix-all, every home and build is different, as well as codes and technology itself. and its meant to be sturdy, clean, yet removeable. but in this case it was not a high temp area.
@@larrylooney Very True, anything you see on CZcams or it’s comments should be taken as broad strokes. Each howe is different and there is always the possibility of previous owner DIY hacks ir lazy contractors/builders, etc. As you mentioned,
robertsrt - yeah I think wherever they are, the state has different building codes than where I am. Because running those power cables in the wall would be against code here and technically illegal. They're obviously not using a power pack so I think it's just extension cables ran thru the wall maybe?
@@honestinsincerity2270 In Massachusetts, where I live, it is also against code to run a TV's power code in a wall because it is not in wall rated. However, I'm pretty sure I spotted a romex cable in that bundle but they didn't really show how they did that. I also really don't understand how they ran the wires through the brick. I think I blinked and missed that part of the video.
@@scotter140Good point and yes it is against copde to run any power cords or extensions in the wall bc they are not rated in wall. Its actually more of an an electrical "jumper" from standard electric following wires and three prong adapters on the ends once out of the wall and then it must be into a surge per code.
agreed, I give this a fail, gas or wood fireplaces become pretty hot behind the face brick and from experience, will cause the wires to become extremely hot, possible damage, and a flex pipe should have been run the entire way, to contain the wires, and proper tv component box should be installed behind tv, where the electrical outlet and media wire hook ups are.
I apologize for the electric part of the video not being shown in its entirety. It was ran up to code in Ohio. We ended up using a female to male three prong plug adapter that allowed for it to be plugged into a surge protector. AV wires didn't need to be ran into any type of tubing, as the brick was just on the surface of drywall and we were had enough room between the mortar and drywall. No issue with heat as we didn't enter into the actual "firebox", which would only be a issue with a wood burning fireplace as gas fireplaces are not much more than a empty box. The customer didn't want any bricks removed so we only used the mortar line to get the wires behind tv then added new mortar. TV height was chosen by the customer, as with every tv we hang its customer choice. We have gone back to this customer and completed more audio video work without any issues with the fireplace tv hang or the other projects.
I concur, but the decision is ultimately up to the home owner, which in this case it was. I will hang a tv on the ceiling or install it in the floor if I'm paid too. lol
Why didn't you use a QBit Cut-In saw for multi-tools to cut out your low voltage bracket hole? Can you light a fire without melting the wires above the fireplace? Glue substance? Acrylic, epoxy, bubble gum? I'd of worn a collared polo shirt for a video. At least the T-shirts weren't wife-beaters. I didn't see an outlet/receptacle on the brick above the mantle. You didn't mention running NM or MC for power. Did you conceal the power cord for the TV and sound bar in the wall? You said "All the wires are hidden". You just provided evidence that any inspector could use to revoke your low voltage business license and for the homeowner to sue you. The NFPA 70 National Electric Code (NEC) 700.8 clearly states, "flexible cords must not be concealed by walls, floors, or ceilings." If that customer's house burns down, AVTech Solutions is likely to be liable. Otherwise, this was a great video explaining and demonstrating many of the factors required for a quality installation. I gave you a thumbs up.
its on TVs are not permanent additions. And sizes and shapes of our cinematainment rooms change in design rapidly, and if you move buy a tv with different bolt pattern its got to come down.
I always drill into the mortar. Mainly because it's easier to fix mortar if you screw up. In mortar, the anchor will press against the surrounding brick and provide a secure and strong hold.
My brace specifically states the brick. But if the anchor is wide enough, I could see it attaching to the brick on either side. I guess that width would be the determining factor, otherwise I wouldn't trust mortar to carry a 40lb load.
I was told also not to drill into the brick because most of the bricks are hollow. (have 2 or 3 holes in them). What are your thoughts on that? Thanks in advance!
This guy does install it correctly per manufacture recommendation but I am a engineer that has many reputed manufacturer recommendations cases. This is one of them. Most don't say anything about where to put the anchors. I do know THX requires their installers to only hit grout lines. Again how will you remove the wall bracket if ever you ever move or want to upgrade. The installer coming in after the fact to install the new homeowners mount is in for a world of hurt...I'll leave it at that.
The manual that came with my brace said not the mortar, but into the actual brick. These guys are professionals, and im sure they've obviously done this before, so why make a video of something that doesnt work, but still. The mortar would be holding the load of 40lbs give or take, idk if thats such a good idea.
Easy to repair mortar later once someone moves. As for as metal anchor spreads and lock into surrounding brick. Also you risk splitting the actual brick which cost you a bunch to fix. If you're really worried then use commercial toggles if you don't mind holes in your brick...geez..it's all relative. I have install over a 1000 and never had one fall or even get loose if that helps. Speaking of the bracket manufacture...I bet they gave you plastic anchors...lol...try them and see how it goes...
I will guarantee to you that if I installed metal anchors into grout....you and all your buddies together won't be able to pull it down...what a joke...please don't waste my time.
over 1000 tv hangs since 09' not one have i had fall. if it was a cantilever it may be needed it all has to do with the math. weight dist. age degree of movement etc.and most mounts don't get reused bc of compatibility issues
Just an FYI from some research:
There is really no consensus on mortar vs brick.. Each has it’s own merits... brick is stronger but brittle and can have air gaps internally... mortar is softer but less likely to crack...(provided it is strong and in good shape and was not mixed poorly)... attaching to mortar you can (and should) use wedge anchors as they are very strong, but would have a tendency to crack brick...which is why on brick you use tapcons, sleeve anchors, or lags with sleeves (and liquid nails if sleeves are plastic is smart idea)...also with plastic sleeves place them so the slits are horizontal (so they expand vertically) which makes them more resilient when hanging things like TV mounts. Also with mortar mounting you always want to mount to the HORIZONTAL mortar lines (since the weight pulling down applies pressure to the rows of bricks above and below).
Mortar is easier to repair as well, but your mortar lines might not be perfectly straight which can make staying in the mortar line difficult. On top of all this, you may not have alot if choice due to where your mount simply has to be placed on the wall.
Both work, but just be aware that wedge anchors should be avoided with bricks but SHOULD be used when mortar mounting (other expansion types like lags w/sleeves work as well, but wedge anchors are the best for mortar mounting). For brick mounting use Tapcons, Sleeve anchors or Lags with metal or plastic sleeves (and liquid nails with plastic sleeves). I know I repeated this last part but it is the important difference between the two ways to mount...i.e. What to use...
BTW, never a bad idea to practice on a spare brick first if going the brick route.
And, of course, a hammer drill (with a good bit) is worth the trouble to buy/borrow if you don’t own one. Not that you absolutely need it, but if your material is really solid (which is a good thing) and your drill/bit is subpar (not a good thing), then drilling can literally be an all day affair... trust me, I have been there! Even a cheap hammer drill (with even just a decent mortar bit) will make the task easier....and with a good bit, it’s almost easy... almost.
I appreciate this info, brotha!
Excellent info!
Thank you.
I know concrete and wanted to better understand brick/ mortar
Awesome information thanks 😊
great info
Wish you were in West Michigan. This is exactly what I need done.
Nice job fishing the cables. Great video!
These guys just hung 2 TVs for me, both above fireplaces, and they did an amazing job. Highly recommend.
And for anyone worried about mounting a TV above a fireplace being uncomfortable, there's a great mantel mount on the market that lets you pull the TV down over the fireplace when you're watching TV: www.mantelmount.com/
do you have a list of supplies needed/used for the project?
thanks for this video. So many people being negative about the height of the TV. I think it would do me good to look up after looking down all day (devices, kids, etc) I have 4 kids under 5 and I can tell you a low tv is a dirty or broke tv. Hanging the basement one above the fireplace as this will be their area for a few years. Thanks again.
Great video, guys. Thanks!
Very helpful video thanks 🙏 off topic just curious the recessed lighting over the fireplace looks very cool did you add them or are they original to the house
I dont believe this video was uploaded by the home owners lol its was just a video that was made for the company who fitted the TV to the fireplace all 3 of them 😂😂😂
Good video.. I've hung many TV's for friends and family...nice work.
Thanks for the video...very helpful!
Geez - such negativity. Thank you guys for sharing this. I know there's value to you as a business, but as a homeowner I found this helpful. Not sure why a handful of folks took to being dicks about it.
Because people are generally dicks when they are behind a computer.
Cause it's a hack job
You guys did a great job
Good job, helpful.
that was very helpful wish you were in GA so I could call you to install this.
Viv Mendoza check out mannystvmounting.com most professional guy I’ve witnessed
should have called. :)
could you have the wires coming that close to the fire if you didn't have a stove insert; what are the codes on that?
Good video but one quick question, how did you make the hole in the mortar at 1:46 to conceal the cables behind the TV? And what did you use? Thank you.
Arturo Alvarez Drill a few holes as if you were stabbing it with a bit.
Good video guys. Just wondering what to do if you don't have that hole to work with from the mantle
You have to make it.
What bolts did use please!?
We want to instill ours on brick wall too
Use Tapcon 2 1/2 inch lags
Should u drill into the brick? Can't the mortar have air pockets?
Looks great!
You drilled through the side of the brick at the top? How did you hide this?
Final product looks great.
Do you have to remove the mantel or can you keep it as is?
I just had two of my anchor screws come out that were drilled into the mortar. The bottom anchors were in the brick and we're still secure.
people move!.....plus tvs and mounts have been changing in design just as rapid as cellphones, its hung to be semi-perm. or until you move or throw a remote through the tv. all was considered but the decision is ultimately up to the home owner. whom decided in this case
What DeWalt model is used?
Great video.
Great work
We always use the mortar joints, we use an adhesive when we insert the plastic anchors, helps hold the lag bolts in place. over 500 tvs hung and no issues with mortar holes!
What type of adhesive do you use??
@@A_Class216 Elmer's glue stick..... with glitter.
Do you guys do work in Columbus
How did they get the fishing poles down from the brick to the hole they cut out?
Need this done, went to the website you guys gave and it said its not a website
Yeah from what I've researched, drilling the bracket holes into the mortar is a no no...should be directly into the bricks instead.
from good old BOB VILLA - Brick usually holds better and supports more weight than mortar. However, if you have old, fragile brick and you're mounting a heavy object that requires deep holes and expansion-style anchors, drilling into the brick may not be the best choice.
What size tv is this?
I removed the mantel and moved it down. I drilled into the brick and you have to pretty stay close center of bricks. To close to the edge and the bricks crumble. I use a 3/16 bit with 1/4 concrete blue screws. Becare screwing the screws in because they can break. Had that happen. I had to use longer screws 3-3/4" because the brick hole stripped out. Still haven't installed tv bracket. Calls for using a 3/8" bit for installing 4 bolts with plastic inserts. There's got to be a better way.
This shit is so surreal. I love it
And one thing the recessed lights gave you extra light to see better
You didn't think to check for wires before you started cutting?
Do you ever come to Columbus, Ohio or know of anyone in Columbus who do a great job as you all do?
Dakz, LLC
How did you cover the wires where they come out of the wall and then into the hole in the mortar. Thx
Duct tape lol
Nice video. One question: I thought that tv cable wires are not in-wall rated. Wouldn't you have had to splice it with actual romex?
I believe you’re correct. I’ve mounted a few TVs and always added an electrical outlet behind the TV so it can plug directly into the wall while hiding the wires. I’m fairly certain it’s dangerous and against some code to run the power cord through the wall.
@@jeffh6889 How to add an electric outlet on bricks on top of fireplace?
Hey Joaquin , I’m no expert, but I believe you’d have to mount one of those metal outlet boxes to the outside of the brick after running the wiring to an existing outlet near the fireplace. I’ve seen one method where conduit was run from above the mantle down to an outlet on the lower left side of the fireplace, and the wiring was run through the conduit. I assume the conduit was designed to protect from any excess heat from the fireplace, but that’s just a guess.
What kind of glue do you put in the anchors
Hilti makes a great adhesive. We use it all the time when drilling and putting rebar in slabs to continues horizontal stretches. we also use them for anchor bolts when building strut structures etc. Really, anytime you use an achor, you should be adding this adhesive
@@benricher9717 great stuff isn't it!
I heard always anchored 1/4 inches from on edge of brick
so what do you do if it's not on a dry-wall? My whole wall is brick.
Amazing 😉
Hello all!
I’ve bought a condo with I’m guessing is the wall mount above my fireplace. I didn’t prefer to use this space for this however the size of my new living room is demanding it. I already have the hardware installed above my fireplace. Then the 2 large brackets with screws and bolts along with knob type adjustments only I don’t know how these pieces all all come together to hang my tv. I hope you can give me some guidance! Thanks so much!!
What did you use to protect cables from frying?
Use in-wall rated cables for one. But the bricks don't get as hot as you might think (there are layers of bricks, and probably a chimney liner which makes the most difference). Note the mantle was mounted to some 2x4s shoved into the brick cavity..
Can you come to Columbus and help us with ours????
Need you guys to do this for me.
neat! ty
Ok what about cables ... you don’t think they’re going to melt from the heat??
What glue do you use for the anchors?
Brandon B Hi was about the ask the same question. What glue to use anyone ?
Mike Jackson ok thanks
use construction glue
I always use solid brick when hanging client tv's and have never had a problem with cracking. Never have trusted mortar and voids!
valid point, but depending on the circumstance. it will hold great, but try to fix the brick when the mounts then where bigger and heavier, as were tvs. plus factor in probability of need to remove . mounts are not 100% universal by far.
What did you do for power?
Yea this was a huge miss. How did the sound bar and TV have power?
refer to above comment from @retroYPbpr
tv looks ok where its put but it does look like its not sitting level
Couldn't see how the wall bracket holes could be lined up with a mortar line top and bottom of the bracket???
I guess since it only took four screws for the mount, the lined the mount up with a straight mortar line at the top, and just adjusted it horizontally until there was mortar in two spots for the bottom screws.
what is the glue substance used??? the name brand
probably loctite
Great video....however you said lags? If anything you would use anchors!
South Charlotte Services; you did not watch the whole video. He used lags WITH anchors AND glue.....I guess epoxy. Gonna need dynamite to get those lags off.
No Glue...just metal anchors...lol
Used 3/8 lag bolts and metal anchors... Never use glue. I did use lag bolts.
@7:01.......dude said he used anchors WITH GLUE.
Great video !!..... I’m a plumber by trade and plastic anchors have never been trusted. We use toggle anchors better know as “butterflys”. Glue is cool but arms are better 💪
How to use them in brick walls?
What was the price of this job???
I agree with drilling in brick but keep in mind its hard to fix brick, easy to fix mortar.
exactly, its a tv, not a Picasso😁
i'm so curious if over time the heat from the fireplace impacted the cables running through the brick. It's my biggest concern with this awesome setup!
Best way to know is to do a test... use an indoor outdoor thermometer (one with a wire for the outside sensor) or a wired/wireless oven thermometer to place in the cavity were you are running the wire...then crank up the fireplace for a good hour... then check the thermometer... if it looks good temp wise, then move the thermometer to different places along the cavity where the wire will be placed.
The thing is that fireplace heat is pretty inefficient and goes UP the chimney... the surrounding brick acts as a heatsink dispersing and chimney heat into the air (in and out) which in turn keeps your house from starting on fire.
Therefore, the brick work itself , especially the extremities (furthest from the fire should stay quite cool, barely above room temp). If your fireplace brick work is getting really hot at the edges, you have bigger issues. Since the wire start closer to the center of the chimney that should be the hottest area so it is the best place to start... and before even drilling, just put your gand on the brick surface, if it is already well above room temperature the you are already a no go (since the TV will nit be safe there).
Hope this helps.
@@GearGuy exactly what was done! nice!
of course this is not a fix-all, every home and build is different, as well as codes and technology itself. and its meant to be sturdy, clean, yet removeable. but in this case it was not a high temp area.
@@larrylooney Very True, anything you see on CZcams or it’s comments should be taken as broad strokes. Each howe is different and there is always the possibility of previous owner DIY hacks ir lazy contractors/builders, etc. As you mentioned,
What type of professional do I call to get my TV mounted like this one? An electrician? General handyman?
and/or audio / video installer.
Hey im trying to do the same
What did u put in the brick hole after drilling in it?
Where is the power outlet for the tv and soundbar?
robertsrt probably with the bundle of cables. Most if not all flat screens now have a detachable power cord.
robertsrt - yeah I think wherever they are, the state has different building codes than where I am. Because running those power cables in the wall would be against code here and technically illegal. They're obviously not using a power pack so I think it's just extension cables ran thru the wall maybe?
Oops!
@@honestinsincerity2270 In Massachusetts, where I live, it is also against code to run a TV's power code in a wall because it is not in wall rated. However, I'm pretty sure I spotted a romex cable in that bundle but they didn't really show how they did that. I also really don't understand how they ran the wires through the brick. I think I blinked and missed that part of the video.
@@scotter140Good point and yes it is against copde to run any power cords or extensions in the wall bc they are not rated in wall. Its actually more of an an electrical "jumper" from standard electric following wires and three prong adapters on the ends once out of the wall and then it must be into a surge per code.
agreed, I give this a fail, gas or wood fireplaces become pretty hot behind the face brick and from experience, will cause the wires to become extremely hot, possible damage, and a flex pipe should have been run the entire way, to contain the wires, and proper tv component box should be installed behind tv, where the electrical outlet and media wire hook ups are.
I apologize for the electric part of the video not being shown in its entirety. It was ran up to code in Ohio. We ended up using a female to male three prong plug adapter that allowed for it to be plugged into a surge protector. AV wires didn't need to be ran into any type of tubing, as the brick was just on the surface of drywall and we were had enough room between the mortar and drywall. No issue with heat as we didn't enter into the actual "firebox", which would only be a issue with a wood burning fireplace as gas fireplaces are not much more than a empty box. The customer didn't want any bricks removed so we only used the mortar line to get the wires behind tv then added new mortar. TV height was chosen by the customer, as with every tv we hang its customer choice. We have gone back to this customer and completed more audio video work without any issues with the fireplace tv hang or the other projects.
Thnk u
So if the brick is covered with plaster how do I install
The studs between the brick and plaster
@@douglassgarvey653 no studs
@@ed.3219 Cut out part of the plaster wall about the size of your bracket and mount to the brick like they do in this video
Wow looks really nice, however the tv seems high like it will put a strain on people sitting down and watching it
I concur, but the decision is ultimately up to the home owner, which in this case it was. I will hang a tv on the ceiling or install it in the floor if I'm paid too. lol
George Costanza!
lol
Wait... I thought he was Art Vandalay. HAHA
@@teeshizzle891 No, it’s T-Bone ! 😄
Well done gents.
Why didn't you use a QBit Cut-In saw for multi-tools to cut out your low voltage bracket hole?
Can you light a fire without melting the wires above the fireplace?
Glue substance? Acrylic, epoxy, bubble gum?
I'd of worn a collared polo shirt for a video. At least the T-shirts weren't wife-beaters.
I didn't see an outlet/receptacle on the brick above the mantle. You didn't mention running NM or MC for power.
Did you conceal the power cord for the TV and sound bar in the wall? You said "All the wires are hidden". You just provided evidence that any inspector could use to revoke your low voltage business license and for the homeowner to sue you.
The NFPA 70 National Electric Code (NEC) 700.8 clearly states, "flexible cords must not be concealed by walls, floors, or ceilings." If that customer's house burns down, AVTech Solutions is likely to be liable.
Otherwise, this was a great video explaining and demonstrating many of the factors required for a quality installation. I gave you a thumbs up.
They should have used conduit behind the walls and then run the cables inside the conduit.
Good job. I just wish you didn’t sound so sad.
worse thing about running wires through walls are when they stop working or place them with better wires 😩🤨💥
I knew this was a good video when the tweaker came out
Why don't you drill into the solid brick, rather than the mortar?
its on
TVs are not permanent additions. And sizes and shapes of our cinematainment rooms change in design rapidly, and if you move buy a tv with different bolt pattern its got to come down.
Are you supposed to drill into Mortar or the Brick? I am hearing drill into the brick.
They said drill into mortar a number of times.
I always drill into the mortar. Mainly because it's easier to fix mortar if you screw up. In mortar, the anchor will press against the surrounding brick and provide a secure and strong hold.
My brace specifically states the brick. But if the anchor is wide enough, I could see it attaching to the brick on either side. I guess that width would be the determining factor, otherwise I wouldn't trust mortar to carry a 40lb load.
uh you guys did not use conduit to cover the cables going behing the walls.
wazzaz azzaza Is conduit required for non power cables?
@@slumberlust nope
Now all you need is a neck brace to deal with neck injury from constantly looking up.
I never understand why people try to mount their TVs so high.
Many times is the best or only place to mount the tv. A tilting mount helps a little.
What Glue Substance Did you use to help Bond the Screws to the Wall? Kinda Vague IMO. We need Details
They wont share that they want people to call them to have them do the install!!
Most likely liquid nail to bond the plastic anchors.
How in the hell did they drill a hole between an inch and a half gap of bricks???? Let alone fish wires through that gap?
very carefully !😁
I don’t have a mantle. Shit.
What drill through mortar...
Is this s joke........
I swear I've heard from different professionals not to or to drill into the brick
Always drill into the brick, it is always stronger than the mortar
You have... there is no consensus on it, but there are caveats... see my other comment (on this same video) for a brief synopsis.
I was told also not to drill into the brick because most of the bricks are hollow. (have 2 or 3 holes in them). What are your thoughts on that? Thanks in advance!
Why make a hole in brick for the wires lol...
I would think just notch the piece of wood they pulled out and run them there. The sound bar would hide them
This guy does install it correctly per manufacture recommendation but I am a engineer that has many reputed manufacturer recommendations cases. This is one of them. Most don't say anything about where to put the anchors. I do know THX requires their installers to only hit grout lines. Again how will you remove the wall bracket if ever you ever move or want to upgrade. The installer coming in after the fact to install the new homeowners mount is in for a world of hurt...I'll leave it at that.
South Charlotte Services plastic anchors with glue and drilling in the mortar.... Is this tv still on the wall, lol
The manual that came with my brace said not the mortar, but into the actual brick. These guys are professionals, and im sure they've obviously done this before, so why make a video of something that doesnt work, but still. The mortar would be holding the load of 40lbs give or take, idk if thats such a good idea.
Easy to repair mortar later once someone moves. As for as metal anchor spreads and lock into surrounding brick. Also you risk splitting the actual brick which cost you a bunch to fix. If you're really worried then use commercial toggles if you don't mind holes in your brick...geez..it's all relative. I have install over a 1000 and never had one fall or even get loose if that helps. Speaking of the bracket manufacture...I bet they gave you plastic anchors...lol...try them and see how it goes...
I will guarantee to you that if I installed metal anchors into grout....you and all your buddies together won't be able to pull it down...what a joke...please don't waste my time.
How you going to repair it if you sell the house?
Never drill into the mortar it deteriorates over time unlike the brick which does not pretty much basic beginners stuff.
customer did not want the bricks drilled. in case there is a need or want to have a future removal.
drill in to the mortar, you serious?
You can drill into mortar. It's not ideal but you can actually do it
that TV so high gives you a neck hernia
Plastic anchors. I don’t think so
How tf you do this with a real chimney
super glue and duct tape!
FALSE do not drill into mortar always drill into the brick . Other than that good job.
Who ever paid these to come fit a tv got ripped off, why? 3 people to install a TV lol
Where’s the electric?
kind of high
If it is any lower, the tv will fry by the heat generated by the fireplace...
TV should be eye level. They are going to get a sore neck with it that high.
he is such blue collar worker
reminds me of my old boss :/
Lol why did people down vote this video?
This is insane, mortar is not strong enough for fixings. Don't do it!!!
over 1000 tv hangs since 09' not one have i had fall. if it was a cantilever it may be needed it all has to do with the math. weight dist. age degree of movement etc.and most mounts don't get reused bc of compatibility issues
Ear protection, folks. Sorry, did you say something?
This dude looks so depressed 😂😂😂