yeah its true about the side stand, it's in the manual. One thing that confuses me tho, it does not really make sense to push the chain up, since it will hit the swing arm no matter what on this model, so pulling down is really all you can do. I tried to figure out what messurement i should go by, i still havent figured it out, so i just let my mechanic tighten it once per year (every 3000-4000km or so)
1. You need to do that on stand when wheel is standing the ground 2. You need to adjust the tension on both sides with the same movement (example 3 on one side and 3 on other) 3. You need to measure the slack (max 30mm) not the the free possition of the chain.
Side stand and verify with rider sitting on it, secondly that chain has got the right slack already, if anything it may need to be slackened a bit... And where is your torque wrench?
Sir parang mali yang patern mo nang pag aadjust ng kadena mo.. ang ibig sabihin ng 30mm ay "slack" yun ang freeplay ng kadena. Okay na yung dati na slack nya bago mo hinigpitan.. magiging prematurely stretch na yang kadena mo nyan and soon kakailanganin mo na magpalit pag ganyan.✌
Hey man you're supposed to pull the chain to tension up and down to measure slack. Also you should do it on the side stand.
yeah its true about the side stand, it's in the manual. One thing that confuses me tho, it does not really make sense to push the chain up, since it will hit the swing arm no matter what on this model, so pulling down is really all you can do. I tried to figure out what messurement i should go by, i still havent figured it out, so i just let my mechanic tighten it once per year (every 3000-4000km or so)
errr, hold on, was this guy measuring the DISTANCE of the chain from the bottom of the swingarm?
According to the manual you should adjust on side stand. Great vid anyway.
1. You need to do that on stand when wheel is standing the ground
2. You need to adjust the tension on both sides with the same movement (example 3 on one side and 3 on other)
3. You need to measure the slack (max 30mm) not the the free possition of the chain.
98Nm for the axle nut.
Side stand and verify with rider sitting on it, secondly that chain has got the right slack already, if anything it may need to be slackened a bit...
And where is your torque wrench?
He got a calibrated torque elbow ;)
Torque specifications are kind of important here
i doubt that the axle nut is tightened enough, you'd need an extension on that little wrench.
Thank you so much!!!
Nice video bro👍
Sir parang mali yang patern mo nang pag aadjust ng kadena mo.. ang ibig sabihin ng 30mm ay "slack" yun ang freeplay ng kadena. Okay na yung dati na slack nya bago mo hinigpitan.. magiging prematurely stretch na yang kadena mo nyan and soon kakailanganin mo na magpalit pag ganyan.✌
How many millage po yan bago ka nag adjust nang chain?
Naka tire sealant b si cb nyo bro?
Paano mo malaman kung msluwag na yun chain
Sir, check mo slack ng kadena mo, standard freeplay ng kadena ay 1in and 3/8 or 30mm