#36 Kubota B2601 Bolt On Grab Handle. Great Tractor Mod.
Vložit
- čas přidán 21. 08. 2024
- Order your grab handle here: www.saltymakes...
Hi, Ed here at MCG. Mike from @Peacefield Farm_MN sent a grab handle to me that he designed and fabricated for his Kubota B2601 compact tractor and asked me to review and share my thoughts with you. There is no drilling or modification of the tractor needed. The design uses existing holes and just bolts onto your LA435 front end loader. You can purchase one of these handles by contacting Mike at mgalla4728@gmail.com or visit this link: www.saltymakes...
I am not affiliated with @Peacefied Farm_MN nor do I benefit from any of the orders you may place. I was just asked to give a review of this grab handle and share it with you. It really works great on my Kubota B2601 with the LA435 front end loader. I'm not sure if will work with the LA434 or other loader assemblies, so be sure to reach out to Mike directly with your questions at mgalla4728@gmail.com. I hope it works for you too!
Here are some of my other product suggestions. These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support!
Lumax Heavy Duty Grease Gun:
amzn.to/3mFK1pA
LockNLube Grease Gun Coupler:
amzn.to/3kPcvwu
Recommended Grease:
Valvoline Moly Fortified
amzn.to/3jNM1Kv
Nitrile Gloves:
amzn.to/34Kg8OG
Deerskin Gloves:
amzn.to/2I17NNy
This may apply to the B2301, B2401, LX2610, LX series, BX series, L series, MX series, M series, and even many other Kubota, John Deere, Mahindra, or other brands of tractors.
This video is intended for entertainment purposes only.
Short Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com/
#B2601 #KubotaTractors #MCGtube #MCGTV
Thanks for sharing this! I saw your video and then reached out to Salty to see if these handles would fit my LX3310 with the LA535 loader, and turns out it’ll fit exactly like on the LA435. So I ordered two, one for each loader arm. They are super solid, and it looks like they changed the grip material, it’s more like a traction strip like you’d put on stair treads to keep from slipping. Seems like it could peel off, but mine’s holding strong even in sub-freezing temps for several weeks now. I’m thrilled with them, thanks a ton for featuring these on your channel. I never would have known about them otherwise.
Hi Brian. That’s great to hear. Thanks very much. -Ed
I need one too! I'm missing something, not sure where I can buy one. Help appreciated, thanks!
Jim OB
Ed.....bought Mike's grab handle for my LX2610 quite a while back and use it numerous times daily. Great addition to the tractor for use when mounting/dismounting. A very well-made product and works perfectly.
Good to know it fits the LX!
Love it! Makes it so easy to climb up and down!
Nice invention. I had a coworker who had a F 350 4x4 company truck issued to him. By the time he had 75,xxx miles on he had 3 steering columns put in it. The mechanic told him to get some running boards put on it and not to use the steering wheel to pull hisself into the cab. That will definitely save your tractor.
I bought one and the workmanship is top notch. It appears he has changed the material he uses to coat the handle with and it doesn't seem like it will chip off
Hey, thanks Ed, great video! I really like the handle too!!
Love a good Dad joke! Just so you know your educational influence has actually helped me recently in real life! A family friend was talking to me about buying a tractor and whether he should go with a Kubota or John Deere and because of your channel I told him to go with the Kubota and he seemed happy! :))
Very nice. Thank you!
Just returned from my local Kubota dealer. The good news: Thanks to your channel it looks like the B2601 will fit my mission. The bad news: They have $o many cool implement$....
Well when you consider that each implement turns your tractor into a whole different machine, it’s a bargain :)
Thanks much and good luck!
It's all about accessorizing. Cool mod.
Thanks for watching!
If you don't use a mid mount mower...you can install the step from a B-2650. It bolts right up and makes getting on and off easier.
Thank you. I’ve thought about doing that.
Looks like a simple well-built mod. I've never really paid attention to how I get on and off my tractor... Now ill have to evaluate...
Hi Ed, what a great aftermarket piece that is. I really like the attention to detail even the paint matches.
Would be nice for the bx tractor for us older people with bad knees.
Thanks much. It’s really a well made piece. Who knows, maybe he would be interested in developing more parts for the BX.
Very well done video. I hope the product takes off
Thanks for featuring this handle! I plan to get one for my B2601. I wish they, or someone, would offer a mount and mirror that would attach to the loader's right side. I know a lot of folks have rigged up golf cart mirrors. But it would really help if someone would sell a package that works, saving time and frustration.
Hi Richard. Glad you enjoyed rye video. Please tell Jason I sent you if you order a handle! Thank you for watching! -Ed
Awesome idea.
Awesome
Good evening Sir 😊 Yes you have a great and unique sence of humor Sir 👌😉 Great grab handle installation and very nice to have for sure and very well made too 👌👍 Have a great week end Sir Cheers !!!
Thanks very much, my friend!
@@MyClutteredGarage 😉👌
I just got mine and he must have fix the issue of not fitting mine went right on without having to bang down on it! It was perfect
Excellent! Thanks for sharing.
Order you grab handle here:
www.saltymakesmn.com/
Check out these other products (Amazon Affiliate links):
Lumax Heavy Duty Grease Gun:
amzn.to/3mFK1pA
LockNLube Grease Gun Coupler:
amzn.to/3kPcvwu
Recommended Grease:
Valvoline Moly Fortified
amzn.to/3jNM1Kv
Nitrile Gloves:
amzn.to/34Kg8OG
Deerskin Gloves:
amzn.to/2I17NNy
Great design and great start. Hopefully your tig welding gets better.
Super!
I've gotten really used to reaching for this grab handle!
Hi Ed! That’s a really cool mod! Never seen that one before. “Did Timmy fall down the well?” LOL! Only old folk like me will get that reference. Thanks for sharing!
Thanks for watching!
That handle would help getting off over the mowing deck for my wife
I think that’s one of the reasons he made it. 👍
I like that handle
Thanks Danny. Now that I’m used to having it, I use it all the time!
@@MyClutteredGarage my L 3301 is made different so that handle would not work on mine, but it gives me a idea!!!! Thanks for the information, God Bless!
My first time visiting your channel. New subscriber. I like what I see so far. Thanks for the video.
Welcome! Thanks so much. -Ed
great job
Thanks much!
Looks like a terrific solution. I know I am already grabbing my steering wheel to get on and off my new LX2610....not good, I'll be contacting them.
Hi Dwayne. Not sure he makes them for the LX, but worth contacting him! Thanks for watching. -Ed
@@MyClutteredGarage I saw where they had them listed (except, out-of-stock currently) for the B2601 but most applicable would be the LX has the LA535 loader which I beleive, is new to the compact class lineup. I did leave Mike a message to find out more.
Ed....exchanged emails with Jason today. My handle will likely ship to me next week. Many thanks for letting us know. Photos coming soon!
@@dwayneloftice2326 Excellent!
that is very neat maybe you could talk him in to makeing a leveling rod kit for the endloader. i have the same kubota and loader you have and no one makes a kit for the loader.
Level indicating rod is really easy to make.
Not quite as easy to understand what its telling you as yo might expect.
A bolt with bushing to affix the rod to the quick attach (loader side)
Long rod bent for an eye to go on the above bolt
A bracket for the rod to guide it and act as your indicator point. This goes near where the loader frame takes a bend.
Bend a "V" or "W" (depending how you look at it) in the rod such that the point is in the guide bracket when the bucket is level.
Raise the loader and actuate the bucked to full dump position. Cut the rod appx 6 inches past the guide/indicator bracket. This ensures the rod won't fall out when you dump the bucket.
You may want to paint or otherwise mark the rod for other level indications. The rod is only accurate at one loader height. (main lift) if the loader does not have the auto-level linkage.
My tractor came with an indicator rod.
I am working out the markings on the rod for different implements and different loader heights.
My pallet forks do not level at the same rod indication as the bucket. (each at 1 inch above ground when leveled, for comparison)
Good job and Good video,also everybody needs to have a Good sence of humor...
Thanks very much!
love it
I can see bashing my right knee on dismount.
Hey Chip. Honestly, I don't think it comes close. I'll try to notice, but it's never been a concern. Thanks for watching! -Ed
Nice video. is Timmy stuck in the well? I had to lol on that one. I have a TYM T494 with a cab. No grab handle on it either. I use the steering wheel. TYM must have figured on people doing that cause the steering wheel is really sturdy.
Thanks very much :)
How many times will you hit your leg getting On and off? Still are having to grab the dash as you get on.
Hi Shawn. The handle is well out of the way, and I’ve formed a habit of grabbing it now. Thanks for watching! -Ed
Does that stick out enough to potentially bash your knee on it?
Not at all. I've gotten pretty dependent on reaching for it now too!
Great handle! How can I get one for my LX3310 with la535 loader?
Need one! Thanks
Thanks Jim. I'm not sure that he makes one but you can reach out on the website www.saltymakesmn.com/
@@MyClutteredGarage Thank you so much, love your channel! Keep it up please!
Are these handles being made anymore? Website says out of stock
Hi Mark. I'm not affiliated with the fabricator but there's a contact form on the website. I'd send him a message. Thanks for watching! -Ed
Where can I get one I just bought myself the b2601 and I'm already tired of putting my hand in grease right where that mounts up to the loader every time I get on and off of it.
Hey Stephen. Congrats on the B2601 purchase. You can find a link in the description. Good luck!
Great idea. But I could not find him. Can you repost the link?
Mgalla4728@gmail.com
Is there space beteen the frame and tractor so the bolt can be put in from the other direction? It would be easier to check if the nut works loose. Otherwise locktite time.
There is enough space, but Mike included a nylon lock nut, so it’s not going anywhere. Thanks for watching.
Have you had any issues with the release levers on the LA 435 loader? My vibrate like the dickens!
Hi I haven’t. I’ll take a look at mine to see if anything jumps out at me. Thanks for watching.
Mine do too! I stuffed some foam in there to keep them still!
@@peacefieldfarm_mn that’s a great idea! I’ll get that a try to quiet them things down. Thanks
Great video and awesome ideal! Hope it really takes off for him. Anyone know if he has one designed for the bx23s? The LA340 FEL. I think that loader doesn’t have that hole near the top like yours. Thanks and im definitely a subscriber!
Thanks very much! Feel free to email your questions. You can find his link in the description.
Okay I have an 1880 with a LA344 loader. The distance between the two braces where you push the handle down is exactly 3 inches. Will this handle fit my loader as well or is the distance on the LA435 more than 3 inches. This would be perfect for my 67 year old hips. Thanks
Our handle is 2.75 inches wide. If your loader has the same mounting holes, if you added some washers to the bolt it would probably work. Go to saltymakesmn.com for ordering info. Thanks for watching!
Hi Did you email Mike at Peacefield Farm_MN?
@@MyClutteredGarage I will do that now thanks. I definitely don't want to watch as my steering wheel slowly starts to loosen up.
@@MyClutteredGarage Just received an answer and they don't make one for my loader. Thanks anyway
👍🇺🇸🇺🇸🇺🇸🗽🙏🏻 Enjoyed! In a pinch it could cradle the chainsaw?
Thanks much! Might be a little wobbly for the saw. Maybe worth looking into!
Hi Ed, any follow-up on using this handle? Still like/use it?
Hi David. Yes, I really use it a lot without even thinking about it. I took the loader off last week and kept reaching for it!
@@MyClutteredGarage LOL and that's great to hear that you still use it, Ed. It's been out of stock for a long time though so playing the waiting game. Thanks for the update!
Can you still get to the grease fitting?
Indeed you can 👍
I was just thinking a grab handle on the top rear corner of my Branson loader frame would be nice.
Branson BL150 loader appears to have similar frame construction, but no drilled holes.
BL150 loader goes to the ##15 series Branson tractors which are larger than your Kubota.
Kubota does make a series the same size as the Branson I have.
(## is the engine HP, 15 is essentially the tractor frame size)
Note that it looks like the grab handle will stay with the loader when you disconnect it from the tractor. (with both your machine and mine)
So if you take the loader off for shredding, you not only lost the grab handle, you lost the ability to grab the loader to aid in climbing up.
Shredding at speed, you want the loader off so it doesn't bounce and shock the tractor frame.
Oh shit handle for those roll overs
Well at least for the pucker factor anyway!
What is the price
Please reach out to Mike via the email in the description. I believe around $60. Thanks for watching.
Hi Mike, does the grease gun work for the zerk fitting in back of the handle? I have a 434 loader and it’s pretty tight now. I also don’t know if the half inch hole is in that loader or if I have to drill 2 holes. Thank you for the video to show how it works. Wayne from Wisconsin
@Peacefield Farm_MN would know the answer for you.
The handle is designed for the LA 435 loader. It may fit your loader, but I cannot recommend drilling holes in your loader frame if they are not already there. Thanks for watching!
@@peacefieldfarm_mn yes I looked and there isn’t a hole in my LA 434 loader. It’s a nice design and well built handle.
@@wlsteffen Thanks Wayne!
Will this work for my L3301 with the LA 535 loader?
Thanks for watching. You can reach out to Mike at Mgalla4728@gmail.com
@@MyClutteredGarage
Okay, thank you.
It should fit. My new LX2610 has the same LA 535 loader and I sent all the measurements to Jason. It's "in the works" as we speak.
@@dwayneloftice2326 thank you for replying. I'm looking forward to hearing if this handle will work on my tractor.
@@bryantjones8039 I will certainly report my findings.....but, I suspect it will be a great improvement for "mounting/dismounting" for these 73+ YO legs!
Would this fit the b2650’s la534?
Unfortunately I have no idea. Maybe shoot Mike an email. Thanks for watching!
I don’t know for sure, but another person said there is not a hole in the loader frame for the bolt.
Peacefield Farm_MN
Ya. I should've looked at my tractor before I even asked. There is no hole for it to hook up into. The loaders are definitely different.
The price is quite salty for something so simple, especially when you add sales tax and shipping you`ll be at around a hundred beans for it. No thanks.
Hi Larry. It's hard for a small fabricator to make a profit without being able to mass produce something like this. It's great quality for those who need it. I appreciate you watching. Happy new year! -Ed
@@MyClutteredGarage
Been there an done it. Not many people get lucky profiting on something so simple. I`m sure his quality is there, but the demand, surly isn`t. I wish him the best regardless.
Worst mod....knee is going to get it and maybe your hip
I like the idea for the location. Would like it to be 90 degrees facing vertical. I agree it takes away from the open space. My body can and needs all the space it can get to clear getting off and on my little BX1850.
Thats a pointless Mod.
Fell asleep watching, far too slow, could have been done in far less than half the time. jg
What is Mike's email
Please see details in the description. Mikes email is Mgalla4728@gmail.com