‪@SRAM‬

#sram #restoration #bikeservice
My 2011 ‪@CannondaleBicycles71‬ Flash F3 is equipped with Sram X7 drivetrain. The shifters though were full of dirt inside and outside. Here's hot to service and overhaul them fully.
🍒 🍒 organic food I use once a day 🍒 🍒
bertrand.bio/
🔥🔥 our cycling forum 🔥 🔥
szajbajk.com/2...
🔥 🔥 our Facebook group 🔥 🔥
/ sickbiker

[@docoffbikes]

I really appreciate you taking the time for this video, repaired a non-functioning 10 spd X9 with your help!

[@rickgaribay]

Absolutely fantastic video. The technical detail and video quality is outstanding. Thank you very much for helping me fix my SRAM Shifter! Please post more like this!

[@jordandeminchuk9832]

My shifter would not shift down on my bike I just bought used after it suddenly stopped shifting. Thanks to your video I spent a few hours and piece by piece disassembled and reassembled my shifter. Everything works great! So much thanks!

[@brianswan3559]

Useful video. I dismantled two X7 shifters a gen1 and gen2 and built a gen2 with the best components from each. Having messed around for a while I began to realise they are not as complicated as I first thought. Have a go.

[@michi125125]

thnaks, i bought this sihter to transfer 11 gear deraiuler to 9 gear for 5 buck but it was toasted. I cleaned it and and new grease and its good as new

[@pescado99]

Top video. I snapped the Y shaped indexing pawl in the RHS (10 speed) thumb handle and machined a new one. Worked perfectly.

[@eliasdanieli5461]

great video, just what i needed!

[@jasonbowker602]

What an awesome video! Limited talk, and only when needed. Points out important placement details for springs, etc. where needed.

[@Andre_Gouveia]

Thank you man, I repair my X7 after 5 years. 👏🏼👏🏼👏🏼

[@yakud3091]

There is a typo in the video title. The title should've had ASMR not SRAM.

[@nicholkid]

You saved me. I was off to a good start but couldn't figure out those freaking springs. Still cursed a bit but got there in the end.

[@StopaskingformynameYouTube]

Thanks!
I will save this for when i need it, both in my browser and offline just in case something happens to this video/channel.
Great information.

[@D4bR]

BIG thanks, you saved me🤠

[@Jaymoid]

Thanks for this, just serviced mine and it works really nicely now.

[@thatotherguy8370]

I've done everything in this video but when I tighten 2 middle big screws my shifter doesn't bounce back but when I losen it a bit it does. But comes completely lose after 1 min. Fix for that maybe?

[@sockadance5590]

Calm you have to be...The spring you be able to replace it properly....
Good job buddy ^^

[@leo_braga]

Ótimo vídeo, consegui salvar meu passador que tinha ido pro além no último pedal

[@mahhubbard]

Dude great video, like fine jewelry. Very calming.

[@petermcinnes6987]

Nice one. Thanks!

[@AlenBlackWolf]

Hvala

[@jorgesaezlaime]

EXCELENTE TUTORIAL PASO A PASO LOGRE REPARAR MI SHIFTER MUCHAS GRACIAS

[@lukaskunc4582]

Thanks a lot! I repaired exactly as per your video; very helpfull:)

[@zol1084]

Shimano grease on Sram? It works? Great video

[@michielnooren2076]

I did my SLX shifters yesterday. After a complete clean I sprayed the inside with some silicone spray grease. Not sure if that's OK but well see what it brings!

[@JD-dj8mh]

@@michielnooren2076 how'd that work out?

[@nddung92]

Wow this ASMR X7 looks nice!

[@docblizard]

Thank you for this video, couldn't find one better filmed. I have a question, did you ever have a shifter that doesn't click all it's gears ( without a cable and attached ), because that's what's going on with my Sram x-5 3 speed shifter, i can only click once to upshift and once to downshit, when i disassembled it i didn't find anything that seemed damaged inside.

[@nathanvolko1874]

I have an x7 like the one in the video, and i didnt even know that it was supposed to downshift 3 clicks in one full lever push. Bought my bike used and its only ever downshifted one gear per full pull. On top of that, downshifting from 5>4>3>2 is REALLY REALLY REALLY fucking hard. So hard in fact that i broke something inside of my shifter yesterday trying to downshift.. mine also doesnt look like its missing anything. Anyways, just got mine apart and cleaned, gna put it togethere here in a few, ill lyk if i find out whats up with mine!!

[@OzFamily06]

Thanks, this helped me repair my X7

[@jerry7054]

Muito obrigado por compartilhar. Ajudou muito. Brasil

[@jovan.vuckovic]

Can you do the same thing for shimamo xt?

[@vushreds]

XT is probably riveted like was Saint I tried to do that on. Have done it on GX 11s.

[@khamzsajiin5117]

Hello sir goodmorning. Can u make a video of full disassemble on sensah rx 12 speed shifter.. Please sir. GODBLESS ❤️❤️❤️❤️

[@braedenklassen2336]

Thank you for this!

[@dingdongd5953]

Nice. Sram x9 next pls.thank you

[@edgarplays3483]

i think its much better if you put some of grease on the screw thread, But nice cleaning :D

[@ichewtoast111]

I don’t understand how to properly clock the racket when reinstalling.

[@syazwanabdull4835]

I like your job detail and tidy

[@brownstripe244]

Big help today mate cheers

[@Mannykalavera]

Which rear derailleur is compatible with these shifters?

[@dsprts]

Metal

[@attilaelekes5534]

Thxs a lot for this !

[@maxiuhmverum5382]

Thank you bro!

[@abderaouf.148]

Thanks ❤

[@hahawang1978]

My shifter had this problem.but I didn't understand the video. .

[@niallmacdonald382]

very helpful

[@maxtorak4544]

Name off blue part?

[@danleon415]

Woooooow.......

[@sebastianalfaro4851]

alguien sabe como se llama la pieza azul ??

[@blcyclerecycle2710]

TW0 wonder hand

[@Ian-bg4yo]

Great video

[@frizz1010]

More difficult on x9.....

[@mindaugasjakubonis149]

What hapend to your voice

[@poifei77]

uu

[@khamzsajiin5117]

Hello sir goodmorning. Can u make a video of full disassemble on sensah rx 12 speed shifter.. Please sir. GODBLESS ❤️❤️❤️❤️