QIDI Tech Q1 Pro - Klipper 3D Printer - Unbox & Setup
Vložit
- čas přidán 27. 06. 2024
- Amazon Links
Buy Q1 here: geni.us/nTgRnw
Recommended: geni.us/JustVlads
QIDI Q1 Pro 3D Printer, 600mm/s High-Speed Fully Auto Leveling 3D Printers with Camera, 60℃ Chamber Heat, 350°C Print Support Carbon Fiber Filament, Tangle Detection, Printing
Dual Z-axis & CoreXY, Fast 3D Printer
Q1 Pro 3D Printer has independent dual Z-axis motors and lightweight CoreXY system. Maximum speed is up to 600mm/s and 20000mm/s² acceleration. This allows for greater precision and high speed printing while still maintaining printing quality.
Full-Auto Calibration & Filament Smart detection
Automated dual sensors allow for more precise auto-leveling and everything ready for you with smart sensors. As well as the intelligent Hall filament runout sensor and filament tangle detection, it can real-time monitor whether the filament is normal or not during the printing process, to ensure the successful printing, making your every printing easier and more efficient.
Active Heating Chamber Temperature Control System
Qidi Q1 Pro 3D printer can actively heat and regulate the chamber temperature. Fully enclosed, accurately controlled chamber temperature (up to 60°C or 140°F) improves print quality and layer adhesion, especially for filaments prone to warping such as ABS, PA and PC.
Print Right Out of the Box
From unboxing to printing in just 10 minutes, perfect for beginners, home use and educational applications. Equipped with a 1080P HD camera with real-time monitoring and time-lapse photography. Mobile APP can be controlled remotely, with 32G-EMMC super large internal storage. Based on Kipper, powerful, completely open source, support custom optimization.
Compatible Materials
PLA、PETG、TPU、PVA、PET、ABS、ASA、PA、PC、Carbon Fiber、Glass Fiber fdm 3D printer filaments etc, 350°C bimetal nozzle meet most materials needs. A new generation of multi-metal hot end hollow design, clog-free direct extruder.
As an Amazon Associate I earn from qualifying purchases
Join Memberships to support this channel:
/ @justvlads - Věda a technologie
Buy Q1 here: geni.us/nTgRnw
Recommended: geni.us/JustVlads
These videos are very addicting.
You only need to do automatic bed leveling and input shaping.
You only need to do the third step of manual leveling according to the tutorial if you still feel that the automatic leveling of the heat bed is not quite accurate.
If you look at the bottom of the heat bed, you will see knobs on both sides.
What would happen if you leave the doors closed with pla? Also is there a non toxic filament that I can use to have this in my room while watching tv or something? Like I don’t expect it to be quiet but closing the doors probably would help noise. The aux fan apparently is the loudest when it’s closed so might look for a more quiet replacement
Not really needed just little nitpicks, most of the time probably won’t matter as I don’t expect to let it run overnight.
guessing you had this printer for awhile before reviewing it? seems you got the model before lot of the upgrades and fixes QIDI implemented.
@36:42 have a link to that file?
Why is everyone testing the old one?
this is clearly an older version, just like creality K1, they fix a lot of thing, it's sad how some companies sell unfinished product just to keep up with the market
I know this is for comments on the video but I am stuck literally.I am unable to log on to Wifi and I do not know how to get Klipper or Orca slicer ,any help would be greatly appreciated.
I have printed the included models and they are perfect but only in Pla and this was bought to use Abs Asa etc. Help please.
Hi, Klipper is already on the machine. Wifi should work out of the box, it's dead easy unless your printer has an issue. you can also use it with an Ethernet cable (haven't tried it) but really Wifi should work. If you're absolutely sure about your network password then send an emailto Qidi support (email written on the printer I think), they're super responsive (mention your order number, it will save you a couple of emails !). There is no point to talk about klipper and Orca till you get your Wifi setup ok.
u have printer outdated before revision. i have after revision and there is lot of changes and improvements
How do i know if i have the revision or not
@@hipton1989 The older version had a pigtail bowden-thing off of the back instead of a port on the left side for filamant loading, also the build plate used to have a single center stop while the newer version has a stop at each back corner. Mine also has an RJ-45 port for network connectivity which I believe the older version dindn't have.
@@hipton1989 and also bed has more magnet becauses testing version had only 3 and bed was raised when asa printed. and bowden tube with wiring should not touch to top cover anymore .
@@PaulKostrzewa that kinda sucks i have the old one, but its been working great so cant complain to much
You need to tighten your belts, and some printers do better with other slicers