Extracting used vape carts using ethanol
Vložit
- čas přidán 6. 09. 2024
- Check out my vape store: cartandpod.com
I don't recommend you actually do this, this is just an experiment for fun.
I go through a lot of Carts and pods, as you can see here.
I'll be showing you another method on how to salvage the extra oil out of your used Carts, pods, and containers.
The first step is to get some isopropyl alcohol and clean the outsides of each pod and cartridge to make sure there are no contaminants or bacteria.
Here I have my lovely assistant cleaning each of them and tossing them into a beaker, be sure to remove any bits of silicone or plastic.
Once all the pods and containers are wiped off and cleaned, high-proof alcohol was poured into each container to sit for a bit.
I then poured some high-proof alcohol into the beaker.
For each of the jars that had some concentrate really stuck to them, I gave them a quick scratching with a glass stir rod before pouring them into the beaker as well.
I then used the rod to stir the contents of the beaker, then put it on a hotplate at a low heat to help the alcohol dissolve all the thc it can.
After stirring and heating for about 10 minutes I strained the liquid through a coffee filter.
I then poured the solution into a larger flask to begin boiling it off.
This took quite some time to accomplish. I could have collected the vapors but my water pump was broken so I had to let them just go into the fume hood. Be extremely careful whenever you are evaporating alcohol such as this as the vapors are highly combustible and may explode if not properly ventilated.
Please don't try doing anything with explosive vapors such as this unless you are aware of the dangers and have appropriate safety gear.
As the alcohol content lowers are the water content rises, you can see some THC starting to separate out of the solution entirely. It also started to get pretty cloudy, this is due to the high water content compared to alcohol content.
I transferred to a beaker at this point as I wanted to ensure ease of collection once it started to boil down to a concentrate.
I took some extra alcohol and swished it around in the flask to get all of the concentrates. As I pour it back in you can see that the white cloudiness disappears as the alcohol content rises compared to the water content.
I proceeded to finish boiling off the rest of the alcohol in the beaker until there was about 20ml or so left.
I then poured what remained into a small glass jar, and set up a little rig so I could use a heat gun to remove the concentrate that was stuck to the beaker.
I poured some alcohol into the beaker and scratched at it with a stir rod to ensure I collected everything into the glass jar.
I placed the jar onto a hotplate and let it stir for a bit at low heat, before letting it settle for a while so I could remove the water with a syringe.
The water is cloudy because of the ouzo effect, when you add water to alcohol certain oils are no longer soluble, and they come out of the solution in the form of microdroplets that make the solution look cloudy like this.
One of the most important steps when dealing with concentrates and solvents is to ensure you do a proper vacuum purge. Here I am using a vacuum pump I made in a previous video along with some rubber adapters to use the jar itself as a small vacuum chamber. This allows me to heat the concentrate more easily and also ensures a more effective vacuum as there is less total volume, but using a regular vacuum chamber would be fine.
After that I was left with nice clear amber oil, I poured it out onto parchment paper and used a heat gun to get it all out of the jar. After letting it cool down, and it became a nice shatter consistency.
Instagram - @johnbrowncannabis - / johnbrowncannabis
Twitter: @JohnBrownCanna - / johnbrowncanna
Discord: / discord
Check out the Part 2 video here for a much easier method!
czcams.com/video/3pg_ypbpG00/video.html
Looking for your own carts to fill? Check out cartandpod.com
A lot of work for a small collection.
@@sonnelandino7697 Yea that's why I recommend the part 2 video method instead
crack head shit
Did already: Not Getting as High Anymore?
czcams.com/video/zDRoeCuARNQ/video.html
🎉🎉🎉😂😂
Dude, your too high if you do this.
Go buy pot so you can relax,make sure it's INDICA
This reminds me of that one meme "give stoners a bunch of weed but nothing to smoke out of, then all of a sudden they become engineers"
Give me an ice pick, avocado, and a snorkle... TRUST ME IVE MADE BONGS WITH LESS!
@@stellarroddities755 I used to make shit out of a straw, any fruit that's the size of your hand and my doobies 🙈😂
@@stellarroddities755 umm...I need u as my friend lol 😂🤙
@@diananop6849 Hey new friend! Lol so did you get the movie reference or just thought i was krafty??😉
@@stellarroddities755 get me a toilet paper roll, a corkscrew and some tin foil!`😂😎 well I was saying either or. A stoner buddy that can be an engineer or one that can quote movies with lmao 🤣👍
the fact that this guy is a scientist and gets absolutely ZONKED makes my day
He never said he actually smokes hahahhaahaha
@@SteveToe He did, at the very beginning of the video. Says he's "gone through many carts in his lifetime"
It's said smarter people are more likely to smoke weed more than not very smart people.
@@snouts9080 carts not reclaim you idiot
@@QuaesitorDei takes more to stimulate an intelligent person's mind as they become bored rather easily with everyday things
This is just the scientist's version of collecting every bit of bud you can find on your table
Lmfao! True!
Hehehe just to add to the top of yeh resin ball you got out of your favorite piece
Right..n got his ol lovely assistant to do it forem like wa
Get fresh sock and put it onto a vacuum
Get it all
Bruh you can just scrap out the cart and dab the distillate not very scientific
This was really really impressive. Also I’m very happy the video wasn’t 20 minutes long. A lot of CZcams content is overstated for monetization now a days
I keep it as short as possible, if I get bored of the video so will everyone else haha
@@CartandPod I respect that a Hell of a lot man! New subscriber right here
@@CartandPod it was so informations i didn't even realize how shower it was
my gosh the typos are insane
Right?
When he pulled out the vacuum purge device I was like nevermind
You gotta vacuum purge. This is a compressor from an air conditioner or fridge it's basically free to set up.
Check out this video to make your own: czcams.com/video/iUbgB_9f8pw/video.html
I was gonna say I have like ten times that amount of carts and jars.. but that looks like not only a heck of a lot of work but also a lot of tools and materials needed to get. But I need to do this.. I’ll easily come up with a quad or half if he came up with that much off what he had
Definitely a like and a new sub.
@@k1llersm0ke32 you don't HAVE to do all this lol...just break open the carts and use a hair dryer to heat the oil out onto a dab mat.
@@meghanhixon3241 his method removes the lipids and liquidizers
Lolol
We need more people like yourself! You're smart, a stoner, a scientist. We need to change the stigma of what a cannabis smoker is.
like masks, these are starting to show up all over the ground. I'd rather find some roaches laying around than these shitty carts. I love when someone tells me their cartridge is "fire." amateurs
@flyneco22 yeeaaah I totally agree man. These add up to alot of waste over time.
@@flyneco22 lol I make my own carts with Fire distillate 🔥 there actually pretty convenient when you can't roll up and I know nobody is carrying a rig around lol
I never need to do any of this, especially with no carts 😭😂 I used to make bongs out of anything tho but not no scientific ass shit 🤣🤣 this just popped up on my recommended 🙈
So be the future you see
This is EXACTLY the science I’m fascinated with. Immediate sub!
Me too. Didnt make it a fraction of the way thru the vid before hit the sub and bell😆😆😆
lmao reading this sentence high as fuck is funny as hell
@@Zach-sg5qb 🤣😂🤣😂 I was thinkin Both of these before I read them lolm I hit subscribe bout the time I saw his lovely assistant cleaning the cartridges And LMAO reading those comments directly above too & cuz I’m high asf currently
Yeah same here i just randomly clicked this video and became an instant fan🌳💨😎
Ong
the new school version of scraping your bowl
Saving your roaches
@@Marvin.45don’t insult that’s a smart thing this some fein shit
@@user-xl6le3oy2w this would be better than saving roaches
The crackhead way 😂
Good lord, it's someone showing how to actually extract the oil instead of a dumbass on tiktok boiling a pot of milk and throwing a fake cart and their grinder in. Keep up the good work!
I like to mix the two concepts. I put a cup of milk in a small beaker and put in the concentrate. Then I mix it with a gallon of milk and drink some every morning
@@springchickena1 it was clearly a joke if anyone does this they deserve the agony they would be in after consuming that 😂🤣
You answered the reason for that yourself in one word. TIKTOK. enough said.
Milk is a fat. Thc is fat soluble. You can make medicated milk. Maybe you are too stupid and should just avoid drugs.
@@desjardiniii5795 I use medimilk in coffee all the time. Problem is getting to faded to have a productive day.
I've done a simpler method of simply swishing all the carts in grain alcohol, letting it evaporate in the sun or by a heat vent, then pour it back into an empty cart. About 32 or so empties to fill one back up, and the taste was actually decent.
Even more simple method in my part 2 video linked at the end
pop the mouth piece off, hold upside down over a jar with pliers and heat with a hair dryer or heat gun. It will all run out into the jar and leave almost no residue. Why make it take more than a few minutes?
@@CartandPodhis method with the sun isn't a great idea my mate did something similar and it all stank like egg
@@CartandPodcan u make me a cart using old cart wax
@@gl40tybum
wow, that's a lot of work
Please read the description and title people. He's not saying to do this or that it's safe. He's just having some fun with some tests.
“I’m not addicted”
Its called saving money
@@dbongoloid9541 it's called a drug addict
@@ginosko_ its called saving money, genius, im sorry that your smooth brain can't accept the fact that Marijuana is an actual medication for a lot of people and not a drug. This dude just spent an hour or 2 collecting probably 100$ worth of concentrate, now that money he saved can go towards whatever he really needs it for, or into a savings account.
Drug addicts don't try to save money.
@@dbongoloid9541 nah its drug addiction.
It def is an addiction. Regardless of how you would like to phrase it. Look up studies in psychosis related to prolonged marijuana use. I’m sure it has some “medicinal” effects but addiction is addiction. Everything in moderation especially drugs.
You can use isopropyl alcohol for this method.
It’s only dangerous to drink, because your liver can’t process it the same as ethanol.
You are definitely right on that one I've been making good shatter with isopropyl in mason jars for years.
correct, and you still purge the concentrate at the end anyways getting rid of almost all of it.
In New Zealand used iso to make good gold concentrates, only used 90%plus pure iso .. Wondering why he said don't use it
Love how he has A MapleStory soundtrack in the background. Nostalgia at its finest.
Kerning city yo
@@710slicknick I was about to comment this hahaha
My lord this brought me back!!! Rogue for life
@@samueltorres4121 Gang
Kerning City gang 😎@@710slicknick
This video has encouraged me to quit weed. Thank you.
😂
Okay I didn’t realize I needed to be in a lab to get some shit out of my old carts lmao
Dude for real I ain't finna do all that shit 😂
Take a look at my part 2 video for a much easier method.
Just unscrew the top scrape all the distillate out and dab it
Just lightly heat the cart with your dab torch and vape away.
🤣🤣🤣🤣🤣i was like hey maybe i can try this saw all the crazy scientific equipment and was like forget it🤣
3:57 forbidden caramel
No. Not one bit. Not at all. It doesn't look like toxic at all 😂
As I was watching the video on mobile, another comment came up at 1:10 saying forbidden soup, then at 3:57 exactly, yours came up saying this. Idk why but this was hilarious to me. So thank you for that.
Bro. I took the mouthpieces off, while holding them with a pair of plyers and used a Blowdryer to drip 15 old ones into 1 "new" vape to fill it to the top. Took about 35 minutes.
but he had like 150. Would have taken him close to 6 hours to do it your way. his way was a more hands off approach and superior as he got the oil that was also in the atomizers.
@@dannyboyyyy14right these dudes are pheinin
This is the modern day equivalent of recycling roaches.
Great science project for small batches! Also freezer purge and heat gun treatment works well if no vacuum equipment is available 👌🏼
Freezer introduces water.
My chemistry set was in my other house that exploded the first time I tried to repurpose my vape carts. I’ll go to the store to buy them until I can purchase a new home as well as a new set of beakers, syringes, heat guns, more beakers, tubes, heat resistant glass, and of course highly flammable high proof alcohol & I’ll put my Bunsen burner on 7 instead of 8 this time.
uuuuuh ok we all should stick to smoking and not chrmistry lol this would deff happen to me.
have you ever had a lipo fire? its terrifying because not a single thing in your home can put out that fire but a Abc fire extinguisher
This reminds me of when I would scrape every pipe I had for resin when I didn't have smoke.
Honestly, those resin dabs taste like shit, but I get FRIED, CHICKEN, off those hits.
The sucky part is that you gotta clean the banger afterwards,
Id rather scrape a pipe than have to construct a science lab for some dab 😂
@@RSI24 looks like a lot of work.
Been their my dude
Lol hell yeah. I can relate. Back when I first started smoking, roughly 25 years ago. When we all ran out of our seedy, brown, bricked swag, we'd meet up and scrap our pipes spotless then take knife hits of the resin. Woooo! It was so harsh and nasty but I would be baked af, layed out on the floor. Best part is just ball of that tarry resin the size of a marble could last 3 of us almost a week, the worst part is the come down included a terrible headache that only went away with a nap.
Ive tried telling so many people not to make oil from Iso/Butane as it requires cleaning/purging, but they don't listen.
The weed community approves the creativity of your background, we resolve we don’t fight we don’t complain!
I've done extremely similar on a stove top, first time was in the oven and I learned real quick why alcohol+contained heat do not mix 😅
BRUH
LEGEND 😂
Lol, I basically did this as a teen and exploded a bottle of small flask of alchohol on a burner that way.
I mean, they do mix quite well, thus why it's not recommended
I did this but i used my hair dryer to heat it up 😂😂😂💅🏻
Had me until 1:38 😣🤦😂😂😂. 💣🧨
This the equivalent to the meme of rolling up roach buds when you are out of weed
Dispensaries should have a return scheme (like electronics places do batteries) to salvage dregs and minimize waste - They could sell it as 'reclaim' and recycle the plastics/steel
that's a really great idea! Only worry would be some places cheeping out on reclaiming, but this would save so much waste.
My old home dispensary used to reclaim and recycle flower jars, and the plastic bags that were opaque that they're forced to sell the product in because "omg what if kids see it?".
Nice even more concentrated metals
You know you have a problem when you go through this much trouble to get out the oil
no fr😂
Bro he just saved himself like 25-30 dollars lol
@@malikshareef2372 I would just say buy another one at that point
@@malikshareef2372 each cartridge or pod is 60a gram of that fire... he's losing either wat
XD
I use 100% isopropyl alcohol which seems to be a bit faster at dissolving thicker oils in my experience. A critical thing I always do though is that I pre rinse all of my carts with it before opening them up to dissolve the contents. This pre-wash reduces the carry over of contamination from the outside of the cartridges which can include skin oils, trapped dust, and other stuff you might not want to be vaping.
Not safe for consumption iso alcohol is not safe
Time sure have changed! From going through ur ash tray to collect all the roaches to roll a good size blunt to learning chemistry to salvage a hit or two! The extend people will go when they learn new ways
How many hits do you think it would take to get to the center of that big chonk he was holding up? I am guessing more than one or two.
Yeah but that hit or two he just made is concentrated THC a lot better than years ago
no way you rolled a blunt with roach remains loool
@@StagnantMizuyeah bruh 😂 save all your roaches, never know when you might need them
@@karoshn wtf
This could be dangerous as you could be leaking heavy metals from the cart with the solvent and with the added heat. You should get it tested for heavy metals to make sure it's safe.
You should be testing your carts for heavy metals before you smoke them in the first place then it's a non issue
L
@@CartandPod i think he meant metal from parts inside the cart. But I died laughing at this reply. 🔥
My boss had me try this on all our returned vape carts and the final oil turned out dark brown / black. I told here theres no way we are putting that out as a product. I have no idea what metals or synthetic materials are inside those carts. I would not smoke this.
Its fucking corroded nickel and chromium this is ridiculous man this shit is terrible for you
Still loving these videos. Nice to see someone using actual lab equipment for once.
*Beezytrips*
if this guy can be a whole ass scientist and still smoke then surely I can be a lawyer and still smoke as long as it doesn't impact my work
I know you shouldn't, but 99.9% rubbing (isopropyl) alcohol was pretty much the standard for making a cheap low-grade green oil. The bikers in Canada would do this back in the late 70's through to the 90's. I'm sure for centuries before that they used some sort of liquid to breakdown the oils and waxes then evaporate the liquid leaving all that THC Yumminess... lol.
Lmao I knew I had I problem once I started boiling my carts to get a couple more hits lmao 😂
Lmao it works tho 😅👍🏼
nigga my jawn giving me dry hits and im still tryna puff that last little oil bubble i see lol
The full transcript of the audio is an amazing touch!
I’ve done this and recovered multiple grams of good quality and full spectrum extract. I think the key points from my experience is to use a high purity solvent, do a pre-wash of unopened carts to remove anything undesirable that also dissolves in said solvent, and to run your extract through a filter before concentrating it.
Hey! Great minds think alike! Lol I've done this exact process before, it's a great way to stretch the supplies out when you're getting low or have a shit ton of old carts laying around. I knew my chemistry hobby would come in useful one day🤣. I did a vacuum distillation when I extracted the bulk of the solvent though to recover the alcohol, it's always fun when I get to bust out the glassware...
I’ve seen all of your videos dozens of times, I wish there was more
Wow, you know you're an addict when you do stuff like this. Little do you know, you are dissolving soldering flux into this mixture. Bravo, top tier brainpower on display right here.
this guy is a total fkwit who's doing these videos for money. Wouldn't bother watching more, he clearly goes into territories he shouldn't
what? WHAT?
Ive used a heat gun to melt the residue, and then I've used a glass ampule to slowly collect all the extra run off, but this is beyond insane. Good on ya man
Yea I got a video doing that too
guys, please don’t do this. some of my closest friends have been hospitalized for dabbing extracts from carts. please don’t do this!!
so they extracted the oil and burned it instead of vaping? mayb thats why..idk im not a musician
@@acrocheezefpv no it’s the fact that carts contain dabs that have butane in them if you want real dabs you need rosin
All I could think about is breaking bad’s “YA SCIENCE BITCH!!!”
Inside the mouthpiece hole on the vape carts will collect dirt, dust and debris. I notice pocket lint in mine.
And for the regular people who don't have this just boil water find a plate that fits over the pot youre boiling the water in, take your iso THC mix and bake it on the plate, clean razor scrap it off when is hardened and done. Used to do this long ago. Just make sure you have good ventilation.
Heat ur leftover carts up with a lighter/blow dryer and put them thread down into a sock, then put that sock inside another one and spin it in a circle for a minute or two to get excess oil near the holes .
That's cool
Genuisss
That nostalgia of the maplestory music, kerning city town music if I’m not mistaken.
You got it
Bro I had to turn it up because I was like is that maplestory. Had to look at the comments to see if anyone else heard it
You just brought scrapie’s to a whole new level 😂
That was awesome!! I have so many empties i wish I could just send to you. Would be a great service/business imo
Check out my latest video for a much easier method
Top shit boss, got like 20 lbs of glass containers to process lol
Holy crap... man got a solid 4-7gs out of the trash basically lolol
@@1mostunknown The alcohol content was evaporated and even purged out with a vacuum chamber.
Thats wax clean af.
@@1mostunknown a lot of people don’t smoke distillate. Like myself prefer live resin or live rasin or solvent-less carts it’s 2021 bro or just dab.
@@1mostunknown oh yeah it would taste like poopoo
I do this with everclear! I then freeze it for a day and filter before evap. Also You've got answers to questions I've had for years! Thank you so much!
Yes I used everclear basically
My process with this is doing what you did then letting the alcohol dissolve to a level where I could transfer it to a Pyrex, then left the solution sitting out for 2 days, all the alcohol dried and i was wet with a similar but darker product. Was also using rigs.
You need to vacuum purge
@@TheFlexorcist what if i dont
@@dogetheboi7888 smoke alcohol or butane if you dont
@@TheFlexorcist If you end up smoking butane then you already smoked it in dog water oil. Purging reclaim wouldn’t do shit to remove butane because there isn’t any butane. That’s actually stupid. And also assuming that you are reclaiming bho anyway. Sure that’s what a lot of people smoke but this isn’t 2015 anymore. And as for purging yeah sure if you want the purest reclaimed wax go for it but you legitimately get the same exact result from baking it. And also doing it with iso. Do it how you want but to attempt to try and say that it’s unsafe if actually done in another proper method then I don’t know what to say. If you care about chemicals entering your body you literally shouldn’t be smoking anything other than the highest end solvent less wax. If you have ever smoked street wax you have smoked something fucked. Period. That’s something that everyone should accept. Same with carts.
Ninja was here 🍯💥💨💨👻👻👻
Doing good with consistent uploads 👍
Yea with an assistant editor it helps speed things up a lot :) trying a new product review series too just need to edit it
This reminds me of a thread I read on a forum at least ten years ago where a guy took over a pound of roach weed and turned it into some beautiful shatter by washing an ETOH extraction with ether and hexane, iirc. It might have ethyl acetate and hexane - I know the initial extraction was done with ETOH and the final washes were done with hexane, but there was a third/intermediary component.
According to the poster, it actually dabbed quite nicely, though it was almost entirely flavorless. I think he ended up making edibles out of it.
I mean, at the end of the day, that kind of processing extracts only the stuff we want, so flower quality can be pretty bad and it still come out good. but that's just a positive in my book. its a good way to use up a bad grow or left overs and scraps
Daim I have a Duffel bag of used carts, I’m definitely going to try this, Dispensary prices suck…
No they don't
This is a procces I though it would be more simple
Wonder what types of metals would show up if you lab tested that. After a lot of it was sitting in cartridges for a long time. Seems sketchy. Empty glass containers maybe worth it...but I would pass on the cartridges.
Same, lots of metals definitely leeched into that wax.
Yeah....I was just thinking this.
Not just metal but the rubber o rings will also break down in isopropyl. This dude didnt think about that. His wax is definitely contaminated.
OK but I don't think your average stoner has professional lab equipment 😂 awesome video bro
oh hell nah wtf
Absolutely amazing! I've saved all my carts but never knew how to get it all out.
You're awesome.
So, it's been 4 months since this post. How much have you reclaimed?
I mean most of these carts are bad for you even if they come from Cali if you want it to be good you gotta get rosin y’all buying butane infused dabs lmao and then saying infusing it with alcohol after the fact is definitely gonna make it safer
@@Realisticskate literally
lmao
Been doing this for a year now!! Its awesome seeing othere catching on. Great video
Yes baby boy you invented it you created the moons and the stars spaceships and cars Leftover oils from your Used Carts And Sniffing cat fahrts
I do this a lot because I prefer tinctures but some cards I have found I have glue paint and other unnecessary things on them so just be aware of which cards are using usually metal or ceramic ones are fine with alcohol. Just make sure they don’t have any painter glue on the inside.
Dude this has to be the coolest thing I’ve seen all day man I appreciate you making my day 10 times better..continue making videos like this I know I’ll be up to date with your post for sure💯💯🙏
great vid!! def got some ideas from this to improve my processes! :D also if you have a vac oven you can do it in a way doesnt winterize the product by getting everything pretty cold (to avoid shock to the glass) and use butane as the solvent (i prefer to offload it first into a cold jar from the cans and stop slightly before its empty to minimize mystery oil) follow a similar process to your minus the hotplates and stuff just let it air purge till its to a point it can go into the vac oven. ( also its super obvious and shouldnt even need to be mentioned but sadly does xD do that shit outside hahah
This is feenin on a whole new level 🤣
Fax bro I was watching it all then seen how much he came up w fuck no fuck that
Not even that bro mfs can sell that shit 😭
@@algotti6821 ain’t no one trynna buy that shit g fuck that
@@ramonledezma9641 there is people that'll buy that I could sell that to sum tweakers 🤣🤣🤣
@@ramonledezma9641 the feens will
When I had a bad crack addiction I spent a tenth of that time looking for a rock in the carpet.
This has got to taste like complete ass after all this extensive heating, and the age and burnt oil out of the coils from the cart
I was thinking the same shitt. I bet there’s some 15 year old who bought all these dabs thinking he scored
Lmao fr tho! I was thinking the same thing 😂 also if it were me (which happens alot cuz I'm ✨ addicted ✨ ) I wouldn't give a fuck, weed/dabs/wax/reisin/ect...I'll save as much as POSSIBLE!
@@jagerbomb5892 haha at least you dont lie to yourself like a lot of the people in the comments. Anybody with a brain knows its addiction
@@Amerikkkan Those reclaim days were rough, glad I’m not going through that anymore. I agree the flavors would make the resin but I’m not a fan of artificial flavor additions
@@Amerikkkan mask the flavors of burnt shitty cotton ?
THIS STARTS WITH RECLAIMING WEED OIL AND ENDS WITH HIM WALTER WHITED NEXT TO HIS INEVITABLE METH LAB
doin to much
On god
You right tho
Like just pick up after this LMAO
How you think you end up with so many?
Ong 😂
Back in the 70's we used to strain bong water, dry out the debris and smoke it 😂
I'm fascinated of the extraction but I'd pass on taking a dab after all that.
how exactly do you think they're made?
@@scottmatznick3140 I know I just compress a 8th and with that pounds of pressure makes it ooz
Sounds like something who’s broke would do, An looks like something a tweaker would do. Lot simpler to just go buy a new 1..🤷🏻♂️ Lol..😂
Hands down the nastiest thing I've ever watched
How?
Yo right
pretty new to the Internet ig huh
Quality content. Straight forward video. Excellent results!
Bros a fiend
Please don't soak carts in solvent... yes you dissolve the concentrate, but you're also picking up solder and other metallic compounds from the atomizer assembly. At the very least test your reclaimed material - you don't want lead, arsenic or mercury in your inhalables 🤦
"That's metal! In your lungs!"
Grain alcohol does the trick
For extraction & purification of
cannabanoids,
psilocybin oil,
LSA & so much more.
Fun Fact: While I'm sure you shouldn't use Isopropyl alcohol for this, RSO is made with isopropyl alcohol and can be used to make edibles
RSO should not be made using isopropyl alcohol, there are no benefits only unhealthy side effects. Everclear/grain alcohol is super cheap, safer and very effective. Have a great day
I’m ngl you just made me wanna go sober. I can’t be associated with mfs that be fienin on this level😑
ur a god, i’m addicted to this shit
This is the most peasant thing I’ve ever saw next to people buying beer with recycled can money.
The weed Bill the science guy....make some 💰 off your knowledge
You doing way to much to get high bro
nah, reclaiming is extremely common.
Tbh this looks like a good dab
Spend money to save money
This is literally the most baser thing I’ve ever seen, and I was in a crackhouse just last week staring at a hot plate cooking crack. If you actually go to the lengths to do this. Instead of just buying another cart. Then you’ve really gotta get your finances, and priorities straightened out big time lol. Also just smoke flower like a real man, and you don’t waste shhhhhiiii
Listen to him don’t do it my glass exploded on me and burnt me 35% do not do this!
Man in all my years of smoking I haven't seen someone make sure they don't waste kush to this level I've seen people be like you spilt a couple flakes but never seen this lmao too good
God this is ridiculous
People think stoners are lazy idiots… they don’t realize most of us run this world. I head up a 3 man crew in an instrument transformer manufacturing plant, I can fix any problem in my department and can still manage 3 guys while helping with production and paperwork. Nice to see other driven, smart people loving weed!
This dude would cure cancer if he put his mind to it.
Thanks good video
Watching this feeling like Walter white getting ready to gather all ur carts and supplies lmaooo
when you dankrupt so you become a chemist to collect all of the dab xD
There are processes you can use alcohol to make thc products. It just needs to be boiled out very carefully. RSO for instance.
Am I ever gonna try this ?
No.
Did I watch the whole thing?
Yeassssssssss 👌🏽🤣